Browse > Article
http://dx.doi.org/10.4191/KCERS.2008.45.9.537

Effect of Template Size Ratio on Porosity and Strength of Porous Zirconia Ceramics  

Chae, Su-Ho (Department of Materials Science and Engineering, the University of Seoul)
Kim, Young-Wook (Department of Materials Science and Engineering, the University of Seoul)
Song, In-Hyuek (Powder Materials Research Division, Korea Institute of Materials Science(KIMS))
Kim, Hai-Doo (Powder Materials Research Division, Korea Institute of Materials Science(KIMS))
Bae, Ji-Soo (Young-Jin Ceramics Co., Ltd.)
Publication Information
Journal of the Korean Ceramic Society / v.45, no.9, 2008 , pp. 537-543 More about this Journal
Abstract
Effect of template size ratio on porosity and mechanical properties of porous zirconia ceramics were investigated using two different size (${\sim}8{\mu}m$ and ${\sim}50{\mu}m$ in diameter) of polymethyl methacrylate-coethylene glycol dimethacrylate (PMMA) microbeads as sacrificial templates. Porosity of the porous zirconia ceramics increased with decreasing the template size ratio ($8{\mu}m: 50{\mu}m$) whereas the compressive and flexural strengths of the porous zirconia ceramics increased with increasing the template size ratio. By controlling the template size ratio, sintering temperature and sintering time, it was possible to produce porous zirconia ceramics with porosities ranging from 57% to 69%. Typical flexural and compressive strength values of porous zirconia ceramics with ${\sim}60%$ porosity were ${\sim}37\;MPa$ and ${\sim}85\;MPa$, respectively.
Keywords
Porous ceramics; Zirconia; Template; Porosity;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
Times Cited By SCOPUS : 2
연도 인용수 순위
1 V. Biasini, M. Parasporo, and A. Bellosi, "Fabrication and Characterization of $Al_2O_3$ Porous Bodies by Hot Isostatic Pressing," Thin Solid Films, 297 207-11 (1997)   DOI   ScienceOn
2 Y. P. Jin and Y. T. Chou, "Thermal and Mechanical Properties of Porous Y-PSZ/Zircon Composites," Mater. Res. Innovat., 1 227-30 (1998)   DOI
3 J. W. Baek and D. J. Kim, "Ceramic Foams by the Self- Blowing of Polymer(in Korean)," J. Kor. Ceram. Soc., 41 [7] 555-59 (2004)   과학기술학회마을   DOI   ScienceOn
4 M. Fukushima, Y. Zhou, H. Miyazaki, Y. Yoshizawa, K. Hirao, Y. Iwamoto, S. Yamazaki, and T. Nagano, "Microstructural Characterization of Porous Silicon Carbide Membrane Support with and without Alumina Additive," J. Am. Ceram. Soc., 89 [5] 1523-29 (2006)   DOI   ScienceOn
5 S. H. Lee and Y.-W. Kim, "Processing of Cellular SiC Ceramics Using Polymer Microbeads," J. Kor. Ceram. Soc., 43 [8] 458-62 (2006)   과학기술학회마을   DOI   ScienceOn
6 Y.-W. Kim, S. H. Kim, C. Wang, and C. B. Park, "Fab rication of Microcelluar Ceramics Using Gaseous Carbon Dioxide," J. Am Ceram. Soc., 86 [12] 2231-33 (2003)   DOI   ScienceOn
7 J. H. Eom, D. H. Jang, Y.-W. Kim, I. H. Song, and H. D. Kim, "Low Temperature Processing of Porous Silicon Carbide Ceramics by Carbothermal Reduction(in Korean)," J. Kor. Ceram. Soc., 43 [9] 552-57 (2006)   과학기술학회마을   DOI   ScienceOn
8 J. H. Eom and Y.-W. Kim, "Fabrication of Silicon Oxycarbide Foams from Extruded Blends of Polysiloxane, Low- Density Polyethylene (LDPE), and Polymer Microbead," Met. Mater. Int., 13 [6] 521-25 (2007)   DOI   ScienceOn
9 B. H. Yoon, E. J. Lee, H. E. Kim, and Y. H. Koh, "Highly Aligned Porous Silicon Carbide Ceramics by Freezing Polycarbosilane/ Camphene Solution," J. Am. Ceram. Soc., 90 [6] 1753-59 (2007)   DOI   ScienceOn
10 Y.-W. Kim, S. H. Kim, I. H. Song, H. D. Kim, and C. B. Park, "Fabrication of Open-Cell, Microcellular Silicon Carbide Ceramics by Carbothermal Reduction," J. Am. Ceram. Soc., 88 [10] 2949-51 (2005)   DOI   ScienceOn
11 A. K. Gain, H. Y. Song, and B. T. Lee, "Microstructure and Mechanical Properties of Porous Yttria Stabilized Zirconia Ceramic Using Poly Methyl Methacrylate Powder," Scripta Mater., 54 2081-85 (2006)   DOI   ScienceOn
12 Y.-W. Kim, J. H. Eom, C. Wang, and C. B. Park, "Processing of Porous Silicon Carbide Ceramics from Carbon- Filled Polysiloxane by Extrusion and Carbothermal Reduction," J. Am. Ceram. Soc., 91 [4] 1361-64 (2008)   DOI   ScienceOn
13 I. K. Jun, Y. H. Koh, J. H. Song, S. H. Lee, and H. E. Kim, "Improved Compressive Strength of Reticulated Porous Zirconia Using Carbon Coated Polymeric Sponge As Novel Template," Mater. Lett., 60 2507-10 (2006)   DOI   ScienceOn
14 J. Adler, "Ceramic Diesel Particulate Filters," Int. J. Appl. Ceram. Technol., 2 [6] 429-39 (2005)   DOI   ScienceOn
15 Z. Y. Deng, J. F. Yang, Y. Beppu, M. Ando, and T. Ohji, "Effect of Agglomeration on Mechanical Properties of Porous Zirconia Fabricated by Partial Sintering," J. Am. Ceram. Soc., 85 [8] 1961-65 (2002)   DOI   ScienceOn
16 J. H. Eom, Y.-W. Kim, I. H. Song, and H. D. Kim, "Microstructure and Properties of Porous Silicon Carbide Ceramics Fabricated by Carbothermal Reduction and Subsequent Sintering Process," Mater. Sci. Eng. A, 464 129-34 (2007)   DOI   ScienceOn
17 D. H. Jang, K. Y. Lim, and Y.-W. Kim, "Effects of Additive Composition and Content on Sintered Density and Compressive Strength of Cordierite Ceramics(in Korean)," J. Kor. Ceram. Soc., 44 [4] 230-34 (2007)   과학기술학회마을   DOI   ScienceOn
18 S. H. Chae, J. H. Eom, Y.-W. Kim, I. H. Song, H. D. Kim, J. S. Bae, S. M. Na, and S. I. Kim, "Porosity Control of Porous Zirconia Ceramics(in Korean)," J. Kor. Ceram. Soc., 45 [1] 65-8 (2008)   과학기술학회마을   DOI   ScienceOn
19 A. K. Gain and B. T. Lee, "Microstructure Control of Continuously Porous $t-ZrO_2$ Bodies Fabricated by Multi-Pass Extrusion Process," Mater. Sci. & Eng. A, 419 269-75 (2006)   DOI   ScienceOn
20 B. Nait-Ali, K. Haberko, H. Vesteghem, J. Absi, and D. S. Smith, "Thermal Conductivity of Highly Porous Zirconia," J. Europ. Ceram. Soc., 26 3567-74 (2006)   DOI   ScienceOn