• Journal of Microbiology and Biotechnology
• /
• v.14 no.4
• /
• pp.673-679
• /
• 2004

A microbial cryoprotectant formulation using a W/O/W multiple emulsion system was developed. The psychrotolerant microorganism, B4, isolated from soil in South Korea, was observed by the drop freezing method, in which the microorganism sample inhibited ice nucleation activity. The antifreeze activity was eliminated when the microorganism sample was treated with protease, indicating that the antifreeze activity was due to the presence of antifreeze protein. The result of the l6S rDNA sequencing indicated the B4 strain was most closely related to a species of the genus Bacillus. Culture broth of B4 strain (Bacillus sp.) and rapeseed oil containing 1 % polyglycerine polyricinolate (PGPR) were used as core and wall material, respectively. The most stable W/O emulsion was prepared at a core/oil ratio of 1:2. The highest W/O/W emulsion stability was achieved when the primary emulsion to external aqueous phase containing 0.5% caster oil polyoxyethylene ether $(COG25^{TM})$ ratio was 1:1. Microcrystalline cellulose showed better W/O/W emulsion stability than other polymer types. The viability of cells in a W/O/W emulsion was higher than free cells during storage at $37^\circ{C}$. An acidic pH and UV exposure decreased the viability of free cells, but cells in W/O/W emulsion were more stable under these conditions.

• Macromolecular Research
• /
• v.14 no.5
• /
• pp.491-498
• /
• 2006

The thermal degradation of poly(hexamethylene guanidine) phosphate (PHMG) was studied by dynamic thermogravimetric analysis (TGA) and pyrolysis-GC/MS (p-GC). Thermal degradation of PHMG occurs in three different processes, such as dephosphorylation, sublimation/vaporization of amine compounds and decomposition/ recombination of hydrocarbon residues. The kinetic parameters of each stage were calculated from the Kissinger, Friedman and Flynn-Wall-Ozawa methods. The Chang method was also used for comparison study. To investigate the degradation mechanisms of the three different stages, the Coats-Redfern and the Phadnis-Deshpande methods were employed. The probable degradation mechanism for the first stage was a nucleation and growth mechanism, $A_n$ type. However, a power law and a diffusion mechanism, $D_n$ type, were operated for the second degradation stage, whereas a nucleation and growth mechanism, $A_n$ type, were operated again for the third degradation stage of PHMG. The theoretical weight loss against temperature curves, calculated by the estimated kinetic parameters, well fit the experimental data, thereby confirming the validity of the analysis method used in this work. The life-time predicted from the kinetic equation is a valuable guide for the thermal processing of PHMG.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.724-728
• /
• 2004

This paper describes on RIE(Reactive Ion Etching) characteristics of 3C-SiC(Silicon Carbide) grown on Si(100) wafers. In this work, CHF$_3$ gas was used to form the polymer as a function of a side-wall for excellent anisotropy etching during the RIE process. The ranges of the etch rate were obtained from 60 $\AA$/min to 980 $\AA$/min according to the conditions such as working gas pressure, RF power, distance between electrodes and the $O_2$ addition ratio in working gas pressure. Under the condition such as 100 mTorr of working gas pressure, 200 W of RF power and 30 mm of the distance between electrodes, mesa structures with about 40 of the etch angle were formed, and the vertical structures could be improved with 50 % of $O_2$ addition ratio in reactive gas during the RIE process. As a result of the investigation, we know that it is possible to apply the RIE process of 3C-SiC using CHF$_3$ for the development of electronic parts and MEMS applications in harsh environments.

• Archives of Pharmacal Research
• /
• v.27 no.1
• /
• pp.118-126
• /
• 2004

The aqueous extract of European mistletoe (Viscum album, L.) has been used in cancer therapy. The purified mistletoe lectins, main components of mistletoe, have demonstrated cytotoxic and immune-system-stimulating activities. Korean mistletoe (Viscum album L. coloratum), a subspecies of European mistletoe, has also been reported to possess anticancer and immunological activities. A galactose- and N-acetyl-D-galactosamine-specific lectin (Viscum album L. coloratum agglutinin, VCA) with Mr 60 kDa was isolated from Korean mistletoe. Mistletoe preparations have been given subcutaneously due to the low stability of lectin in the gastrointestinal (GI) tract. In the present study, we investigated the possibility of alginate/chitosan microcapsules as a tool for oral delivery of mistletoe lectin. In addition, our strategy has been to develop a system composed of stabilizing cores (granules), which contain mistletoe lectin, extract or powder, coated by a biodegradable polymer wall. Our results indicated that successful incorporation of VCA into alginate/chitosan microcapsules has been achieved and that the alginate/chitosan microcapsule protected the VCA from degradation at acidic pH values. And coating the VCA with polyacrylic polymers, Eudragit, produced outstanding results with ideal release profiles and only minimal losses of cytotoxicity after manufacturing step. The granules prepared with extract or whole plant produced the best results due to the stability in the extract or whole plant during manufacturing process.

• Advances in aircraft and spacecraft science
• /
• v.6 no.2
• /
• pp.169-187
• /
• 2019

This work presents a practical detailed finite element (FE) approach for the three-dimensional (3D) free-vibration analysis of actual aircraft and spacecraft-type lightweight and thin honeycomb sandwich panels. It consists of calling successively in $MATLAB^{(R)}$, via a developed user-friendly GUI, a detailed 3D meshing tool, a macrocommands language translator and a commercial FE solver($ABAQUS^{(R)}$ or $ANSYS^{(R)}$). In contrary to the common practice of meshing finely the faces and core cells, the proposed meshing tool represents each wall of the actual hexagonal core cells as a single two-dimensional (2D) 4 nodes quadrangularshell element or two 3 nodes triangular ones, while the faces meshes are obtained simply using the nodes at the core-faces interfaces. Moreover, as the same 2D FE interpolation type is used for meshing the core and faces, this leads to an automatic handling of their required FE compatibility relations. This proposed approach is applied to a sample made of very thin glass fiber reinforced polymer woven composite faces and a thin aluminum alloy hexagonal honeycomb core. The unknown or incomplete geometric and materials properties are first collected through direct measurements, reverse engineering techniques and experimental-FE modal analysis-based inverse identification. Then, the free-vibrations of the actual honeycomb sandwich panel are analyzed experimentally under different boundary conditions and numerically using different mesh basic cell shapes. It is found that this approach is accurate for the first few modes used for pre-design purpose.

• Genes and Genomics
• /
• v.40 no.11
• /
• pp.1237-1248
• /
• 2018

Introduction Cellulose microfibril is a major cell wall polymer that plays an important role in the growth and development of plants. The gene cellulose synthase A (CesA), encoding cellulose synthases, is involved in the synthesis of cellulose microfibrils. However, the regulatory mechanism of CesA gene expression is not well understood, especially during the early developmental stages. Objective To identify factor(s) that regulate the expression of CesA genes and ultimately control seedling growth and development. Methods The presence of cis-elements in the promoter region of the eight CesA genes identified in flax (Linum usitatissimum L. 'Nike') seedlings was verified, and three kinds of ethylene-responsive cis-elements were identified in the promoters. Therefore, the effect of ethylene on the expression of four selected CesA genes classified into Clades 1 and 6 after treatment with $10^{-4}$ and $10^{-3}M$ 1-aminocyclopropane-1-carboxylic acid (ACC) was examined in the hypocotyl of 4-6-day-old flax seedlings. Results ACC-induced ethylene either up- or down-regulated the expression of the CesA genes depending on the clade to which these genes belonged, age of seedlings, part of the hypocotyl, and concentration of ACC. Conclusion Ethylene might be one of the factors regulating the expression of CesA genes in flax seedlings.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.5
• /
• pp.758-764
• /
• 2019

${\beta}$-Glucan is a chief structural polymer in the cell wall of yeast. ${\beta}$-Glucan has attracted intensive attention because of its wide applications in health protection and cosmetic areas. In the present study, the ${\beta}$-glucan biosynthesis pathway in S. Cerevisiae was engineered to enhance ${\beta}$-glucan accumulation. A newly identified bacterial ${\beta}-1$, 6-glucan synthase GsmA from Mycoplasma agalactiae was expressed, and increased ${\beta}$-glucan content by 43%. In addition, other pathway enzymes were investigated to direct more metabolic flux towards the building of ${\beta}$-glucan chains. We found that overexpression of Pgm2 (phosphoglucomutase) and Rho1 (a GTPase for activating glucan synthesis) significantly increased ${\beta}$-glucan accumulation. After further optimization of culture conditions, the ${\beta}$-glucan content was increased by 53.1%. This study provides a new approach to enhance ${\beta}$-glucan biosynthesis in Saccharomyces cerevisiae.

• The Korean Journal of Food And Nutrition
• /
• v.35 no.1
• /
• pp.43-50
• /
• 2022

Agar, a heterogeneous polymer of galactose, is the main component of the cell wall of marine red algae. It is well established as a safe, non-digestible carbohydrate in oriental countries. Neoagarooligosaccharides (NAOs) prepared by hydrolyzing agar by microbial β-agarase have been reported to show safety. However, their immunological effects have not been reported yet. Thus, the objective of this study was to investigate immune enhancing effects of neoagarooligosaccharides (NAOs) from marine red algae Gelidium elegans in mice by performing ex vivo experiments. Six-week-old mice were fed ad libitum. NAOs were orally administrated at three different concentrations (100, 500, and 2,500 mg/kg B.W./day) twice a week for four weeks. The group fed with NAOs at 2,500 mg/kg showed the highest proliferation of splenocytes and production levels of cytokines (IL-1β, IL-6, TNF-α) in the ex vivo experiment. In conclusion, NAOs can enhance immune function, increase proliferation of splenocytes, and increase cytokine production by activating macrophages in mice.

• Structural Monitoring and Maintenance
• /
• v.9 no.3
• /
• pp.259-270
• /
• 2022

This study explores the use of the recently developed "strain-sensing smart skin" (S⁴) method for noncontact strain measurements on cement-based samples. S⁴ sensors are single-wall carbon nanotubes dilutely embedded in thin polymer films. Strains transmitted to the nanotubes cause systematic shifts in their near-infrared fluorescence spectra, which are analyzed to deduce local strain values. It is found that with cement-based materials, this method is hampered by spectral interference from structured near-infrared cement luminescence. However, application of an opaque blocking layer between the specimen surface and the nanotube sensing film enables interference-free strain measurements. Tests were performed on cement, mortar, and concrete specimens with such modified S⁴ coatings. When specimens were subjected to uniaxial compressive stress, the spectral peak separations varied linearly and predictably with induced strain. These results demonstrate that S⁴ is a promising emerging technology for measuring strains down to ca. 30 𝜇𝜀 in concrete structures.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.3
• /
• pp.71-78
• /
• 2004

The purpose of this study was to investigate the water absorption and thickness swelling of biocomposites at room temperature. These properties of bio-composites mainly depend on the ability of the agro-flour to absorb water through hydrogen bonding between water and the hydroxyl groups of the holocellulose and lignin in the cell wall. As the content of agro-flour increased, the water absorption and thickness swelling of the bio-composites increased. The effects of agro-flour content and rice husk flour (RHF) particle size on the water absorption and thickness swelling of the bio-composites were evaluated. In general, wood-based materials showed significantly higher water absorption and thickness swelling than the bio-composites. This might be attributed to the ability of the polybutylene succinate (PBS) hydrophobic polymer to prohibit the water absorption and thickness swelling of the bio-composites, Therefore, the use of agro-flour filled PBS bio-composites, which exhibit improved dimensional stability in comparison with wood-based materials, is recommended.