• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.339-346
• /
• 2022

Silicon (Si) has attracted considerable attention due to its high theoretical capacity compared to conventional graphite anode materials. However, Si-based anode materials suffer from rapid capacity loss due to mechanical failure caused by large volume change during cycling. To alleviate this phenomenon, crosslinked polymeric binders with strong interactions are highly desirable to ensure the electrode integrity. In this study, thermally crosslinked polyimide binders were used for Si-alloy anodes in Li-ion batteries. The crosslinked polyimide binder was found to have high adhesion strength, resulting in enhanced electrode integrity during cycling. Therefore, the Si-alloy anodes with crosslinked polyimide binder provide enhanced electrochemical performance, such as Coulombic efficiency, capacity retention, and cycle stability.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.141-142
• /
• 2020

In this study, the performance evaluation was performed by adding a polymer aqueous solution as a new additive of the red clay binder for use in the rammed earth construction method. The evaluation items were compressive strength and microstructure analysis. As a result of the experiment, the performance of the red clay binder was improved by efficiently bonding the silica particles by the polymerized polymer.

• 콘크리트학회논문집
• /
• 제18권2호
• /
• pp.219-226
• /
• 2006

본 연구에서는 복합 재질 폐플라스틱을 재활용한 폴리머콘크리트의 압축, 휨 및 충격강도, 흡수율 및 동결융해저항성에 미치는 결합재 첨가량 및 PA 혼입량의 영향에 대하여 연구하였다. 그 결과 복합 재질 폐플라스틱을 재활용한 폴리머콘크리트의 압축, 휨 및 충격강도는 PA 혼입량에 관계없이, 결합재 첨가량 및 충전제 혼입량의 증가에 따라 증가하는 경향을 나타냈다. 하지만, PA 혼입량의 증가에 따라서는 감소하는 경향을 보였다. 복합 재질 폐플라스틱을 재활용한 폴리머콘크리트의 흡수율은 PA 혼입량에 관계없이, 결합재 첨가량의 증가에 따라 감소하는 경향을 나타냈다. 하지만 PA 혼입량의 증가에 따라서는 증가하는 경향을 나타냈다. 복합 재질 폐플라스틱을 재활용한 폴리머콘크리트의 내구성 지수는 결합재 첨가량의 증가에 따라 증가하였으나, PA 혼입량에 따라서는 감소하는 경향을 보였다.

• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.364-371
• /
• 2015

폴리머 콘크리트의 원가절감을 위해서 생산비의 대부분을 차지하는 폴리머 결합재의 사용량을 절감하는 것이 매우 중요하다. 산업부산물로 얻을 수 있는 플라이 애쉬와 아토마이징 제강 환원슬래그는 구형의 재료이다. 구형의 제강환원슬래그는 래들로 환원공정에서 생산되는 제강슬래그를 아토마이징 기술로 제조하였다. 폴리머 콘크리트 복합재료의 제 물성을 조사하기 위하여 폴리머 결합재의 첨가율과 아토마이징 제강 환원슬래그의 대체율에 따라 다양한 배합의 폴리머 콘크리트 공시체를 제조하고 물성시험을 실시하였다. 시험결과, 아토마이징 제강 환원슬래그의 대체율과 폴리머 결합재의 첨가량이 증가됨에 따라 공시체의 압축 및 휨강도는 현저하게 향상되었다. 내열수성시험에서 압축강도, 휨강도, 밀도 및 세공의 평균직경은 감소되었으나 총세공량과 공극률은 증가되었다. 탄산칼슘(충전재)과 강모래(잔골재)대신 구형의 플라이 애쉬와 아토마이징 제강 환원슬래그를 사용하여 만든 폴리머 콘크리트의 작업성이 현저히 개선되어 본 연구에서 개발된 폴리머 콘크리트는 종래의 제품보다 폴리머 결합재의 사용량을 18.2% 절감할 수 있게 되었다.

• Advances in concrete construction
• /
• 제5권6호
• /
• pp.587-611
• /
• 2017

This study focused on the influences regarding the use of polyepoxide-based polymer and silica fume (SF) on the fresh and hardened state properties of self-compacting lightweight concrete (SCLC) along with their impacts on electrical resistance and ultrasonic pulse velocity (UPV). To do so, two series of compositions each of which consists of twelve mixes, with water to binder (W/B) ratios of 0.35 and 0.4 were cast. Three different silica fume/binder ratios of 0, 5%, and 10% were considered along with four different polymer/binder ratios of 0, 5%, 10%, and 15%. Afterwards, the rupture modulus, tensile strength, 14-day, 28-day, and 90-day compressive strength, the UPV and the electrical resistance of the mixes were tested. The results indicated that although the use of polymer could enhance the passing and filling abilities, it could lead to a decrease of segregation resistance. In addition, the interaction of the SF and the polymeric contents enhanced the workability. However, the impacts regarding the use of polymeric contents on fresh state properties of SCLC were more prevalent than those regarding the use of SF. Besides the fresh state properties, the durability and mechanical properties of the mixes were affected due to the use of polymeric and SF contents. In other words, the use of the SF and the polymer enhanced the durability and mechanical properties of SCLC specimens.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 추계학술대회
• /
• pp.157-160
• /
• 2001

The electrodes were fabricated by compounding the commercial activated carbons and additives of conducting polymer with PVdF mono binder and PVdF-PVP mixed binders. The best performance of the electrodes fabricated with activated carbon(BP-20) and PVdF-PVP mixed binders showed in 88wt. ％ BP-20. 7wt. ％ conducting polymer and 5wt.％ PVdF-PVP mixed binder. The electrode exhibited excellent electrochemical characteristics having 8.16 W.h/kg of energy density, 34.77 F/g of specific capacitance, $0.67\Omega$of ESR.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.391-394
• /
• 2003

Effects of the polymer-binder ratio and slag content on the properties of combined wet/dry-cured polymer-modified mortars using granulated blast-furnace slag are examined. Results shows that the flexural, compressive, tensile and adhesion in tension strengths of polymer-modified mortar using the slag tend to increase with increasing slag content, and is inclined to increase with increasing polymer-binder ratio. In particular, the polymer-modified mortars with slag content of 40% provide about 20% higher tensile strength than unmodified mortars. Such high strength development is attributed to the high tensile strength of polymer and the improved bond between cement hydrates and aggregates because of the addition of polymer.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.73-76
• /
• 2010

This study deals with the properties of polymer-modified mortars with a nitrite-type hydrocalumite, which are effectively used as intelligent patch materials for deteriorated reinforced concrete structures. The calumite is a material that can adsorb the chloride ions (Cl-) causing the corrosion of reinforcing bars and liberate the nitrite ions (NO2-) inhibiting the corrosion in reinforced concrete, and can provide a self-corrosion inhibition function to the reinforced concrete. Polymer-modified mortars using hydrocalumite and terpolymer powders are prepared with various calumite contents and polymer-binder ratios, and tested for corrosion inhibition. Subsequently, regardless of the polymer-binder ratio, the replacement of ordinary portland cement with the calumite has a marked effect on the corrosion-inhibiting property of the polymer-modified mortars.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.92.2-92.2
• /
• 2011

고분자전해질 연료전지 (PEMFC)의 가격 결정 요인 중 막 전극 접합체 (MEA)가 차지하는 비중은 약 45%정도이며, 이것을 구성하는 주요 부품인 기체 확산층 (GDL)은 carbon paper나 carbon cloth 형태가 사용되고 있다. 그렇지만 GDL을 제조하는 공정은 매우 복잡하고, 그 가격이 너무 높은 단점이 있다. 본 연구에서는 카본블랙, 흑연 등의 탄소화합물과 polymer binder를 이용하여 단순화된 공정으로 GDL을 제조하였다. 또한, GDL의 물리적 특성이 전극 성능에 미치는 영향을 분석하기 위하여 표면 morphology, 접촉각 및 표면에너지, 전기전도도, 기체투과도, porosity, pore distrivution 등을 측정하였고, 각각의 GDL 표면에 동량의 Pt 촉매를 도포하여 MEA를 제작한 후 그 성능을 평가하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.22-23
• /
• 2017

The purpose of this study is to ascertain self-healing function on microcracks in bisphenol F-type epoxy-modified mortars using expansive admixtures. The specimens are prepared with various polymer-binder ratios of 0, 5, 10, 20%, expansive admixture contents of 0% and 10%, a sodium carbonate content of 0.25%, and subjected to exposure conditions of CR1, CR2, CR3 and CR4. The specimens are tested for self-healing effect, porosity and FE-SEM analysis. As a result, self-healing effects of bisphenol F-type EPMMs with expansive admixtures are visible in all of the outdoor exposure conditions. In particular, exposure conditions of CR3 and CR4 are most noticeable. And the porosity of EPMMs is reduced with an increase in the polymer-binder ratio, and is considerably smaller than that of unmodified mortar.