• 한국수소및신에너지학회논문집
• /
• 제12권4호
• /
• pp.257-265
• /
• 2001

Placing a hydrogen conducting, methanol impermeable metallic barrier like palladium (Pd) is a well-known method for preventing methanol crossover through solid polymer electrolyte for direct methanol fuel cells (DMFC). Applying a bias potential between the anode and the barrier can further develop this concept so that the hydrogen transfer rate is enhanced. Since hydrogen diffuses in Pd as atomic form while it moves through nafion electrolyte as ion, it has to be reduced or oxidized whenever it passes the interface formed by Pd and the electrolyte. We performed experiments to measure the hydrogen transport through the Pd membrane placed in Nafion electrolyte of hydrogen/oxygen fuel cell (PEMFC). Applying a bias potential between the hydrogen electrode of the cell and the Pd membrane facilitated the hydrogen passage through the Pd membrane. The results show that the cell current measured with the Pd membrane placed reached almost 40 % the value measured with the cell without Pd membrane. It was found that the current flown through the bias path is only a few percent of the cell current.

• Macromolecular Research
• /
• 제14권1호
• /
• pp.101-106
• /
• 2006

The transport of reactant gas, electrons and protons at the three phase interfaces in the catalytic layers of membrane electrode assemblies (MEAs) in proton exchange, membrane fuel cells (PEMFCs) must be optimized to provide efficient transport to and from the electrochemical reactions in the solid polymer electrolyte. The aim of reducing proton transport loss in the catalytic layer by increasing the volume of the conducting medium can be achieved by filling the voids in the layer with small-sized electrolytes, such as dendrimers. Generation 1.5 and 3.5 polyamidoamine (PAMAM) dendrimer electrolytes are well-controlled, nanometer-sized materials with many peripheral ionic exchange, -COOH groups and were used for this purpose in this study. The electrochemically active surface area of the deposited catalyst material was also investigated using cyclic voltammetry, and by analyzing the Pt-H oxidation peak. The performances of the fuel cells with added PAMAM dendrimers were found to be comparable to that of a fuel cell using MEA, although the Pt utilization was reduced by the adsorption of the dendrimers to the catalytic layer.

• 해양환경안전학회지
• /
• 제28권4호
• /
• pp.657-666
• /
• 2022

국제해사기구(IMO)는 국제해운 분야의 온실가스(Green House Gas, GHG) 감축을 위하여 각국의 기술 개발 및 에너지 효율성 제고에 관한 정책 시행을 적극적으로 권장하고 있다. 이러한 IMO의 환경규제와 관련된 정책들은 해운 분야 전반에 큰 영향을 미치고 있으며, 선주들에게도 막대한 부담으로 작용하고 있다. 선박에서 발생하는 GHG 배출을 억제하기 위한 가장 합리적인 방안은 탄소제로배출(Zero Emission) 선박의 개발로 귀결된다. 즉 친환경 연료로 추진하는 연료전지선박(Fuel Cell Ship, FCS)의 개발이 IMO의 규제를 벗어날 수 있는 대안인 것이다. 아시아, 북미, 유럽 등의 각국에서는 독자적으로 PEMFC를 개발 및 생산하여 국제공인등록 기관으로부터 형식승인인증을 획득함으로써 국제표준화의 선점을 추구하고 있다. 현재 다양한 연료전지(Fuel Cell, FC) 중에서 선박용으로 권장하는 것은 크게 고분자전해질 연료전지(PEMFC), 용융 탄산염 연료전지(MCFC) 및 고체산화물형 연료전지(SOFC) 등의 세종류가 있다. 본 연구에서는 글로벌 FC 시장에서 지속적인 성장이 예상되는 PEMFC를 대상으로 하여 국내외 개발 동향, 제조업체별 규격, 성능 및 선박에 적용한 실증적 사례를 분석하였다. 그리고 PEMFC를 선박에 적용할 경우, 고려해야 할 사항과 개발 방향에 관하여 제안하고자 하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1788-1790
• /
• 2012

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2005년도 수소연료전지공동심포지움 2005논문집
• /
• pp.307-312
• /
• 2005

• 한국막학회:학술대회논문집
• /
• 한국막학회 2005년도 추계 총회 및 학술발표회
• /
• pp.204-207
• /
• 2005

• 한국수소및신에너지학회논문집
• /
• 제26권6호
• /
• pp.554-559
• /
• 2015

Single cell of PEMFC (polymer electrolyte membrane fuel cell) is composed of bipolar plates, gasket, GDL and the MEA. Bipolar plate's function is the collecting electricity, helping oxygen/hydrogen gas diffuse evenly and draining the water and heat. In this work, we have conducted experiments to low contact resistance and improve the performance of a $25cm^2$ single cell by using metal forms. We have following experimental cases: 1) Conventional graphite serpentine channel bipolar plate; 2) Channel-less bipolar plate with nickel(Ni) based metal foam which coated by various materials. We focused the difference in contact resistance and performance of the single cell with metal foam depending on various coating materials. The experimental results show the similar performance of single cells between with serpentine channel bipolar plates and with channel-less bipolar plate using metal foams. In addition, single cell with metal foam shows potential to higher performance than conventional channel.

• 멤브레인
• /
• 제15권2호
• /
• pp.141-146
• /
• 2005

본 연구에서는 흑연, 열경화성 수지, 그리고 카본 블랙을 사용하여 조성과 제조 조건을 달리하여서 탄소 복합체를 제조하였다. 제조된 탄소 복합체의 고분자 전해질 연료전지용 bipolar plate로의 응용 가능성을 살펴보기 위하여 연속 흐름 기체 투과 장치를 사용하여서 산소의 투과도를 측정하였다 실험 결과 카본 블랙의 양이 증가할수록 산소 투과도가 증가하였으며, 탄소 복합체의 성형 시간이 증가할수록 투과도가 감소하였다 반면에 성형 압력은 산소 투과도에 큰 영향을 미치지 않음을 알 수 있었다.

• Journal of Electrochemical Science and Technology
• /
• 제8권1호
• /
• pp.7-14
• /
• 2017

This study aims to examine the influences of substrates/diffusion layers (DL) and oxygen reduction reaction catalysts ($M_{ORR}$) on the performance of $M_{ORR}/IrO_2$/DL-type bifunctional oxygen electrodes for use in polymer electrolyte membrane (PEM)-type unitized regenerative fuel cells (URFC). The $M_{ORR}/IrO_2$/DL electrodes were prepared via two sequential steps: anodic electrodeposition of $IrO_2$ on various DLs and fabrication of $M_{ORR}$ layers (Pt, Pd, and Pt-Ru) by spraying on $IrO_2/DL$. Experiments using different DLs, with Pt as the $M_{ORR}$, revealed that the roughness factor of the DL mainly determined the electrode performance for both water electrolyzer (WE) and fuel cell (FC) operations, while the contributions of porosity and substrate material were insignificant. When Pt-Ru was utilized as the $M_{ORR}$ instead of Pt, WE performance was enhanced and the electrode performance was assessed by analyzing round-trip efficiencies (${\varepsilon}_{RT}$) at current densities of 0.2 and $0.4A/cm^2$. As a result, using Pt-Ru instead of Pt alone provided better ${\varepsilon}_{RT}$ at both current densities, while Pd resulted in very low ${\varepsilon}_{RT}$. Improved efficiency was related to the additional catalytic action by Ru toward ORR during WE operation.

• Korean Membrane Journal
• /
• 제9권1호
• /
• pp.43-51
• /
• 2007

This paper describes the preparation and characterization of two kinds of fluorinated polybenzimidazole (PBI)s which can be potentially used for phosphoric acid-doped, high-temperature polymer electrolyte membrane fuel cells. Two kinds of perfluorocyclobutane (PFCB)-containing monomers were prepared via following synthetic steps; after fluoroalkylation of methyl 3-(hydroxy) benzoate and methyl 4-(hydroxy) benzoate with 1,2-dibromotetrafluoroethane and subsequent Zn-mediated dehalogenation, these compounds were cyclodimerized at $200^{\circ}C$ affording the ester-terminated monomers containing PFCB ether groups. The synthesized intermediates and monomers were characterized using FT-IR, $^1H-NMR,\;^{19}F-NMR$, and mass spectroscopy. The fluorinated PBIs were then successfully prepared through the solution polycondensation of the monomers and 3,3'-diaminobenzidine in polyphosphoric acid. Compared with traditional PBI, the glass transition temperatures of the fluorinated PBIs were obtained at $262^{\circ}C\;and\;269^{\circ}C$ which are lower than that of PBI and their initial degradation temperatures were still high over $400^{\circ}C$ under nitrogen. The fluorinated PBIs showed higher d-spacing values and improved solubility in several organic solvents as well as phosphoric acid, which confirmed they could be good candidates for the high temperature fuel cell membranes.