• Polymer(Korea)
• /
• 제26권2호
• /
• pp.227-236
• /
• 2002

The structure of pregel state in thermoreversible poly(vinylidene fluoride)(PVDF) /propylene carbonate(PC) system was investigated by laser light scattering. It was found that the PVDF chain did not exist as a separate chain even in a very dilute concentration(i.e. 100 times more dilute than the gel formation concentration) but as a large spherical aggregate with the radius of gyration $R_G$, of 232 nm and the effective hydrodynamic radius $R_H$= of 407 nm at $40^{\circ}C$. Based upon experimental results such as $R_H/R_G$=ratio of 1.75 and the pattern of scattering intensity with a minimum, a core-shell type sphere model was suggested as a structure of the aggregate. According to this model, the radius of core part was estimated as 215 nm, the shell thickness as 192 nm, and the ratio of monomer density of the shell part to that of the core part as about 0.075.

• Bulletin of the Korean Chemical Society
• /
• 제23권4호
• /
• pp.633-636
• /
• 2002

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.164-169
• /
• 2008

In this study, the facilitated transport membranes, poly (ether ether)ketone (SPEEK)-Ag salts layers on top of polycarbonate supports membrane, were prepared and tested for the separation of propylene/propane. SPEEK was synthesised using PEEK and $H_2SO_4$. Experiments were porformed at room temperature and feed pressures up to 30 psig. The SPEEK-Ag salt membranes showed good selectivity for propane over propylene. With increasing the concentration of SPEEK in MeOH, 5~20 wt%, the thickness of SPEEK membrane on the polycarbonate increased. The selectivity and permeance of SPEKK-Ag membrane for propylene/propane were changed by membrane thickness and concentration of Ag salts.

• Polymer(Korea)
• /
• 제37권2호
• /
• pp.249-253
• /
• 2013

From poly(lactic acid) (PLA) and poly(propylene carbonate) (PPC) synthesized using $CO_2$, a PLA/PPC/PLA layered film is prepared by coextrusion and then stretched to uniaxial orientation. The mechanical, optical, and barrier properties and shrinkage of the prepared film were investigated in detail. The maximum shrinkage of PLA/PPC/PLA film reached to 60% at $75^{\circ}C$. With increasing PPC content, the ratio of shrinkage of the film was increased and its shrinkagerate was increased. The ratio of shrinkage of the film decreased with increasing stretching temperature. The prepared film has oxygen and vapor transmission barrier properties. In this study, the PLA/PPC/PLA film is expected to be commercialized as a environmentally friendly shrinkable film.

• Elastomers and Composites
• /
• 제27권3호
• /
• pp.161-173
• /
• 1992

A series of polyurethane block copolymers based on hydroxyterminated poly(dimethyl siloxane), poly(propylene glycol) and poly(tetramethylene glycol) soft segments of molecular weights 1,809, 2,000 and 2,000, respectively, were synthesized. The hard segments consisted of 4,4'-diphenylmethane diisocyanate and 1,4-butanediol as the chain extender. Samples with different molar ratios were prepared. We tried to synthesize poly(dimethyl siloxane)-based polyurethane(PDMS-PU) containing a hard block as major fraction and a soft block as minor fraction for preparing toughened rigid systems. After a study of the pure PDMS-PU, poly(propylene glycol)-based polyurethane(PPG-PU) and poly(tetramethylene glycol)-based polyurethane(PTMG-PU), (mixed polyol)-based block copolymers and blends between PDMS-PU, PPG-PU and PTMG-PU were prepared, and characterized by means of differential scanning calorimetry, tensile testing and scanning electron microscopy. In (mixed polyol)-based PU and in lower hard segment content blends, macro-phase separation was shown, but blends with higher hard segment contents showed significant reduction in amounts of phase separation.

• Clean Technology
• /
• 제13권1호
• /
• pp.79-84
• /
• 2007

Separation of ethylene from ethane and propylene from propane have been conducted using facilitated olefin transport membrane with SPEEK-Ag (Ag substituted sulfonated poly(ether ether ketone)). SPEEK was prepared by the sulfonation of PEEK using cone. $H_2SO_4$ and the reaction time affected the degree of sulfonation (DS) of the resulting SPEEK. SPEEK-Ag composite membrane was formed by soaking SPEEK in the polyester support into the Ag salt solution. With increasing the concentration of SPEEK in MeOH, the thickness of SPEEK on the polyester increased. The selectivity and the flux of SPEEK-Ag membrane for the separation of ethylene/ethane and propylene/propane were changed by the thickness of SPEEK layer on the top of polyester support. The anion of silver salt also affects the membrane performance.

• Proceedings of the Korean Fiber Society Conference
• /
• 한국섬유공학회 1996년도 추계 학술발표회
• /
• pp.190-194
• /
• 1996

• Proceedings of the Korean Society of Rheology Conference
• /
• 한국유변학회 2002년도 춘계 학술발표회 논문집
• /
• pp.137-140
• /
• 2002

• Macromolecular Research
• /
• 제11권5호
• /
• pp.375-381
• /
• 2003

Silver salt complex membranes with glassy poly(methyl methacrylate) (PMMA) unexpectedly showed higher propylene permeance than those with rubbery poly(butyl methacrylate) (PBMA) where as neat PMMA is much less permeable to propylene than that of neat PBMA. Such unusual facilitated olefin transport has been systematically investigated by changing the side chain length of polymethacrylates (PMAs) from methyl, ethyl to butyl. The ab initio calculation showed almost the same electron densities of the carbonyl oxygens in the three PMAs, expecting very similar intensity of the interaction between carbonyl oxygen and silver ion. However, the interaction intensity decreases with the length of the alkyl side chain: PMMA > PEMA > PBMA according to wide angle X-ray scattering and FT-Raman spectroscopy. The difference in the interaction intensity may arise from the difference in the hydrophilicity of the three PMAs, as confirmed by the contact angle of water, which determines the concentrations of the ionic constituents of silver salts: free ion, contact ion pair and higher order ionic aggregate. However, propylene solubilities and facilitated propylene transport vary with the side chain length significantly even at the same concentration of the free ion, the most active olefin carrier, suggesting possible difference in the prohibition of the molecular access of propylene to silver ion by the side chains: the steric hindrance. Therefore, it may be concluded that both the hydrophilicity and the steric hindrance associated with the side chain length in the three PMAs are of pivotal importance in determining facilitated olefin transport through polymer/silver salt complex membranes.

• Polymer(Korea)
• /
• 제39권3호
• /
• pp.461-467
• /
• 2015

This paper reports the combined effects of the triblock copolymer surfactant poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) (PEG-PPG-PEG) and imidazole on the opto-electrical and mechanical properties of poly(3,4-ethylenedioxythiophene) (PEDOT)-based thin films prepared via vapor phase polymerization (VPP) using ferric p-toluenesulfonate as a catalyst. Various PEDOT-based thin films were synthesized using PEG-PPG-PEG and imidazole alone and in combination to compare and correlate their effects on film properties. The improved conductivity of the PEDOT films was higher than $1300S{\cdot}cm^{-1}$ when the surfactant and imidazole were used together. The PEG-PPG-PEG chain length was also varied to identify the best conditions for the VPP-based preparation of PEDOT thin films.