• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.141-144
• /
• 1998

An L-band omnidirectional circular polarized wave antenna is designed and evaluated for transmitting/receiving of vehicle data. Conventional linear polarized wave antenna can not reveive clearly all of the vehicle data which come from the wide driving test range on account of distortion. To overcome this problem, an omnidirectional circular polarized wave antenna is required for the design, first of all, the characteristics, design principle and theoretical background of circular polarized wave with a little signal loss have been reviewed. The designed antenna characteristics an analysed and compared to the desired ones. Our results demonstrate that the strength of vehicle data is flat enough over the full test range using this new antenna.

• 한국통신학회논문지
• /
• 제23권9A호
• /
• pp.2391-2401
• /
• 1998

본 논문에서는 차량의 각종 Data 송/수신용 L-Band (1435MHz~1535MHz) 무지향성 원편파 안테나의 설계연구를 수행하였다. 기존의 직선편과 안테나가 장애물 및 지면의 반사잡음의 영향으로 수신신호 크기가 감쇄되어 시험로 일부지역에서 신호손실을 초래하여 안테나 교체가 필요하였다. 그래서 반사의 의한 신호감쇄가 적은 원편파 안테나 특성과 이론적인 배경 및 설계원리를 연구하여 안테나를 제작하였고, 복사특성 실험을 통하여 설계치 보다 우수한 성능을 확인하였다. 또한 차량성능 원격측정 시스템을 이용하여 실차 실험한 직선편파 안테나와 비교하여 수신레벨이 5dB이상 향상됨과, 시험로 전지역에서 신호의 손실없이 획득 가능함을 입증하였다.

• ETRI Journal
• /
• 제25권1호
• /
• pp.41-48
• /
• 2003

This paper presents a theoretical investigation of power reflection and transmission coefficients for a meander-line polarizer placed periodically on a chiral slab. It is assumed that a linearly polarized transverse magnetic wave is incident on a chiral slab from the air region. In the analysis, we derive the electric and magnetic fields in the modal form in the air and chiral regions. We obtain power reflection and transmission coefficients in a straightforward manner after matching the tangential components of the electric and magnetic fields at the boundaries. We present numerical results for the power reflection and transmission coefficients versus frequency and incident angle for different values of the chirality admittance. A meander-line polarizer placed on a dielectric slab can convert a linearly polarized wave to a circularly polarized wave. The design parameters for a meander-line polarizer are the dimensions of the meander-line and the values of the dielectric slab. Replacing a dielectric slab with a chiral slab introduces a new independent parameter which controls the wave polarization.

• ETRI Journal
• /
• 제31권1호
• /
• pp.77-79
• /
• 2009

The wave concept iterative procedure (WCIP) is used to analyze a quasi-square open metallic ring frequency selective surface (FSS). The quasi-square open metallic ring FSS is dual-polarized. When the incident plane wave is polarized in a direction parallel to the FSS' coupled parallel strips, it shows two rejecting bands. Moreover, another rejecting band can be obtained if the source plane wave is perpendicularly polarized with respect to the FSS' coupled parallel strips. The three resonant frequencies are inversely proportional to the length of the FSS' coupled strips to provide an easy fine tuning of the FSS structure. The simulated results obtained using WCIP are compared to the measured results, and a good agreement is reported.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.55-61
• /
• 2021

In this paper, we proposed and implemented defect detection methods of polarized film with half-wave phase retardation plates. We investigated the principles of phase retardation compensation and optical principle of half-wave phase retardation plates. We analyzed of samples of polarized film with half-wave phase retardation plates. The optical defect detection methods are proposed and the performance is validated with experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1391-1394
• /
• 1998

In this paper, we investigated the generation of pretilt for nematic liquid crystal (NLC) in a cell with linearly polarized ultraviolet (UV) light irradiation on polyimide (PI) surface. The pretilt angle of the NLC increases with increasing the incident angle in the cells with S-wave polarized UV light irradiation on PI surface. It is considered that the pretilt angle of the NLC increased due to decreasing the UV light intencity. We suggest that the pretilt angle of the NLC is attributed to asymmetry triangular of the polymer surface with S-wave polarized UV light irradiation on PI surface. Also, we consider that the asymmetry triangular of the Polymer not formed with P-wave polarized UV light irradiation on PI surface. Therefore, the pretilt angle of the NLC is attributed to asymmetry triangular of the polymer surface with UV light irradiation on PI surface.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.38-43
• /
• 2004

This paper describes the construction of a circular polariscope. Generally, a circular polariscope contains four optical elements and a light source. The first element following the light source is called the linear polarizer. It converts the ordinary light into plane-polarized light. The second element is a quarter wave plate which converts the plane-polarized light into circularly polarized light. Following the quarter wave plate, a specimen made of transparent photoelastic material is located in a loading device. The second quarter wave plate is set and the last element is the analyzer. These polarizing elements, two quarter wave plates and two linear polarizing filters, were purchased from the USA. Frames and other structures for holding polarizing filters were machined and assembled to be rotated. Light box, which includes four incandescent lamps and two sodium-vapor lamps, was made. In order to proof the function of the newly built polariscope, Tardy compensation test was applied to a rectangular shaped specimen made of poly-carbonate material (PSM 1). The error of the fringe constant, which was measured by the newly built polariscope, was within 4.4 percent compared to the standard value of this material. It is possible to make a good quality of polariscope if accurate polarizing filters will be used.

• 한국전자파학회논문지
• /
• 제14권2호
• /
• pp.133-138
• /
• 2003

본 논문에서는 비가시거리(NLOS) 전파환경에서 원형편파를 송신하고 수직, 수평편파 안테나로 수신하는 원형편파 다이버시티(CV-CH)방식에 대하여 이론적 모델을 제시하고 이의 우수성을 확인하였다. 원형편파 다이버 시티에 대한 간단한 이론적 모델을 통하여 XPD에 대한 상관계수 평가식을 유도하였으며, 비가시거리 전파환경에서 원형편파다이버시티 경우 직선편파다이버시티(VV-VH) 경우보다 교차편파분리도(XPD)가 약 6~7 dB 정도 낮게 됨을 알 수 있었다. 그 결과 원형편파 다이버시티 경우의 상관계수는 기존의 직선 편파다이버시티보다 더 낮은 상관계수 값을 나타내는 이론적 모델을 제시하였고 측정된 결과로부터 이의 성능을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.744-747
• /
• 2001

This paper shows shear wave behavior of CFRP composite laminates as a polar grid form to evaluate vibration pattern of ultrasonic transducers, which gives measured modelling fundamental contents of nondestructive evaluation. Polarized direction can be obtained by using a c-scanner and sensitivity of transducers is founded when using through-transmission method of two transducers. And modelling of vector decomposition is presented based on ply-to-ply method to apply practicable nondestructive evaluation of CFRP laminate lay up. This modelling decomposes the transmission of linearly polarized wave into orthogonal components through each ply of a laminate. It is found that a high provable shows between the model and experimental developed in characterizing layup of CFRP composite laminates.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1395-1397
• /
• 1998

In this paper, we studied the liquid crystal(LC) alignment and generation of pretilt angle in nematic (N) LC with oblique p-wave polarized ultraviolet (UV) light irradiation on the two kinds of the polyimide (PI) surface. The monodomain alignment of NLC is obtained with oblique p-wave polarized UV light irradiated on PI surface at 5$\sim$60min. We obtained that the pretilt angles of the NLC is generated about $2.1^{\circ}$ with angle of incidence of $30^{\circ}$ at 20min. Also, the pretilt angle of NLC decreases with increasing the imidization temperature on PI surface.