• 제목/요약/키워드: Polarization and stability

검색결과 130건 처리시간 0.027초

Effect of Basis Set Superposition Error on the MP2 Relative Energies of Gold Cluster Au6

  • Kim, Kyoung-Hoon;Kim, Jong-Chan;Han, Young-Kyu
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권4호
    • /
    • pp.794-796
    • /
    • 2009
  • We have studied the structures and stabilities of Au6 to explore the origin of the large discrepancy between relative energies obtained from the density functional theory (DFT) and ab initio correlated levels of theory. The MP2 methods significantly overestimate the stability of the non-planar isomer when the double-$\zeta$ polarization quality of basis sets, such as LANL2DZ+1f and CEP31G+1f, are used. However, we show that such preference for the non-planar structure at the MP2 level mainly originates from the large basis set superposition error.

3차원 내시경술을 위한 양안 입체 영상처리 및 디스플레이 방법 (Method of Display and Processing of Binocular Stereoscopic Image for 3D Endoscopy)

  • 송철규
    • 대한의용생체공학회:의공학회지
    • /
    • 제19권5호
    • /
    • pp.531-538
    • /
    • 1998
  • 본 논문은 내시경 수술시 입체영상을 제공하여 수술의 편리성과 정확성을 향상시키기 위한 고화질 3차원 내시경 영상의 처리와 디스플레이 방법을 연구하였다. 기존의 3타원 내시경 수술을 위한 디스플레이 방법은 안경 차용의 무게감과 플리커가 심한 전자셔터 방식으로 사용의 불편함이 많았다 된 연구에서는 기존 내시경 영상의 3D 디스플레이 방식인 전자셔터식에 대한 입체 영상의 특징을 분석하고, 이에 대한 문제점을 보완하기 위한 편광방식의 입체 영상처리와 재현 방법에 대하여 연구하였다. 또한 설계한 디스플레이 시스템의 성능 평가를 수행하여 기존 방식인 CRT방식에 의한 영상재현 방법에 비해 화질과 시야각 특성에서 우수함을 확인하였다.

  • PDF

Synthesis of Zirconium Oxide Nanoballs Using Colloid-Imprinted Carbon and Their Electrical Properties

  • Kim, Chy Hyung
    • Transactions on Electrical and Electronic Materials
    • /
    • 제16권2호
    • /
    • pp.86-89
    • /
    • 2015
  • Uniform ZrO2 nanoballs were synthesized at 700℃ using the inverse replication method through a colloid-imprinted carbon (CIC) template. The structural, dielectric, and conducting properties of the ZrO2 nanoballs were investigated and compared with those of ZrO2 film prepared by sol-gel method and powdered ZrO2 chemical. Both the monoclinic and cubic phases were found in the ZrO2 balls and film but the ZrO2 chemical showed a monoclinic phase, where the cubic structure is known to be formed at above 2,300℃. ZrO2 nanoballs showed the lower dielectric property of k = 21.2 at 1 MHz because the 8-coordinated cubic phase in the ZrO2 nanoball produced lower polarization than the polarization of the 7-coordinated monoclinic ZrO2 chemical (k = 23.6). The dielectric stability was maintained in each ZrO2 ball, film, and chemical under the applied forward and reverse voltage range (−5 to +5 V) at 1 MHz. The ionic conductivities were 7.86 × 10−8/Ω·cm for ZrO2 nanoballs, 3.29 × 10−8/Ω·cm for ZrO2 chemical, and 6.70 × 10−5/Ω·cm for the thickness of 1,053 nm ZrO2 film at room temperature with the electronic contribution being less than 0.006%.

용융탄산염 연료전지의 양극 및 대체재료의 제작에 관한 연구-Ni-Co양극에 관하여- (A Study on the Development of Anode Material for Molten Carbonate Fuel Cell -Ni-Co anode-)

  • 황상문;김선진;강성군
    • 한국표면공학회지
    • /
    • 제27권3호
    • /
    • pp.166-175
    • /
    • 1994
  • The effect of Co addition on the electrochemical performance and structural stability of porous Ni anode for molten carbonate fuel cell(MCFC) was evaluated by the anodic polarization and the sintering test in the simulated MCFC anode condition ($650^{\circ}C$, 80% $H_2$+20%$CO_2$). The anode current density ranged from 110mA/$cm^2$ to 144mA/$cm^2$ was obtained at +100mV overpotential by additions of Co up to 10 wt.%. The sintering resistance of Ni-Co anodes was higher than that of the pure Ni anode. The increase of sintering resistance seemed to be to the lower diffusion coefficient of Co than that of Ni.

  • PDF

압전 소자형 광섬유 격자 소자를 이용한 파장 분할 다중화 시스템용 파장 가변형 광 분기/결합 장치 (Optical tunable wavelength add/drop multiplexer employing piezoactuated fiber Bragg gratings for WDM system)

  • 김세윤;이상배;최상삼;정준;정지채
    • 한국광학회지
    • /
    • 제8권4호
    • /
    • pp.340-344
    • /
    • 1997
  • 기존의 광섬유 격자 소자를 이용한 광 분기/결합 장치들이 광섬유 격자 소자의 브래그 파장에 해당하는 신호만을 선택할 수 있었던 단점을 극복하기 위해 압전 소자에 광섬유 격자 소자를 부착한 압전 소자형 광섬유 격자 소자를 제작하고, 이러한 압전소자형 광섬유 격자 소자와 편광 선속분할기를 이용하여 파장 분할 다중화 시스템용 파장 가변형 광 분기/결합 장치를 제안하고 실험하였다. 본 장치는 두 빛의 편광 상태를 이용하여 광섬유 격자 소자에 해당하는 파장의 신호를 분기/결합하는 장치로서 외부의 온도 변화에 크게 영향을 받지 않는 안정적인 특성을 보였다. 압전 소자에 전압을 인가함으로써 광섬유 격자 소자의 브래그 파장에 해당되는 신호(1549.3 nm)뿐만 아니라 가변된 파장(1550.1 nm)의 신호도 분기/결합할 수 있었다. 파장을 가변하지 않을 경우와 파장을 가변했을 경우 모두 광섬유 격자 소자에 의해 분기된 신호와 인접 채널 신호간의 차이 -26 dB 이하였으며 분기된 신호 중 광섬유 격자 소자를 통해 나오는 누설 신호는 -34 dB였다.

  • PDF

Experimental Techniques for Surface Science with Synchrotron Radiation

  • Jonhnson, R.L.;Bunk, O.;Falkenberg, G.;Kosuch, R.;Zeysing, J.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1998년도 제14회 학술발표회 논문개요집
    • /
    • pp.17-17
    • /
    • 1998
  • Synchrotron radiation is produced when charged particles moving with relativistic velocities a are accelerated - for example, deflected by the bending magnets which guide the electron or p positrons in circular accelerators or storage rings. By using special focusing magnetic lattices i in the particle accelerators it is possible to make the dimensions of the particle beam very small with a hi맹 charge density which results in a light source with high b디lIiance. Synchrotron light h has important properties which make it ideal for a wide range of investigations in surface s science. The fact that the spectrum of electromagnetic radiation emitted in a bending magnet e extends in a continuum from the 얹r infra red region to hard x-rays means that it is id않I for a v variety of spectroscopic studies. Since there are no convenient lasers, or other really bright l light sources, in the vacuum ultraviolet and soft x-ray re.밍ons the development of synchrotron r radiation has enabled enormous advances to be made in this di펌C비t spectr따 re밍on. P Polarization-dependent measurements, for ex없nple ellipsometry or circular dichroism studies a are possible because the radiation has a well-defined polarization - linear in the plane of orbit w with additional right-circular, or left-circular, components for emission an생es above, or below, t the horizontal, respectively. Since the synchrotron light is emitted from a bunch of charge c circulating in a ring the light is emitted with a well-defined time structure with a short flash of l light every time a bunch passes an exit port. The time structure depends on the size of the ring a and the number and sequence of filling of the bunches. A pulsed light source enables time¬r resolved studies to be performed which provide direct information on the lifetimes and decay m modes of excited states and in addition opens up the possibility of using time of flight t techniques for spectroscopic studies. The fact that synchrotron radiation is produced in a clean u ultrahi야 vacuum environment is of gr않t importance for surce science studies. The current t비rd generation synchrotron light sources provide exceptionally high baliance and stability a and open up possibilities for experiments which would have been inconceivable only a short time ago.

  • PDF

2-종 모드 레이저를 이용한 고분해능 헤터로다인 간섭계 (A High-Resolution Heterodyne Interferometer using Beat Frequency between Two-Axial Modes of a HeNe Laser)

  • 김민석;김승우
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 추계학술대회 논문집
    • /
    • pp.214-219
    • /
    • 1997
  • We propose a new scheme of high-resolution heterodyne interferometer that employs the two-axial mode He-Ne laser with an inter-mode beat frequency of 600-1000 MHz. An electronic RF-heterodyne circuit lowers the beat frequency down to 5 MHz, so that the phase change of the interferometer output is precisely measured with a displacement resolution of 0.1 nanometer without significant loss of dynamic bandwidth. A thermal control scheme is adopted to stabilize the cavity length with aims to suppress frequency drifts caused by the phenomena of frequency pulling and polarization anisotropy of the two-axial mode laser to a stability level of 2 parts in $10^9$. The two-axial mode HeNe laser yields a high output power of 2.0 mW, whlch allows us to perform multiple measurements of up to 10 machine axes simultaneously.

  • PDF

Silyl-group functionalized organic additive for high voltage Ni-rich cathode material

  • Jang, Seol Heui;Jung, Kwangeun;Yim, Taeeun
    • Current Applied Physics
    • /
    • 제18권11호
    • /
    • pp.1345-1351
    • /
    • 2018
  • To allow stable cycling of layered nickel-rich cathode material at high voltage, silyl-functionalized dimethoxydimethylsilane is proposed as a multi-functional additive. In contrast to typical functional additive, dimethoxydimethylsilane does not make artificial cathode-electrolyte interfaces by electrochemical oxidation because it is quite stable under anodic polarization. We find that dimethoxydimethylsilane mainly focuses on scavenging nucleophilic fluoride species that can be produced by electrolyte decomposition during cycling, leading to improving interfacial stability of both nickel-rich cathode and graphite anode. As a result, the cell cycled with dimethoxydimethylsilane-controlled electrolyte exhibits 65.7% of retention after 100 cycle, which is identified by systematic spectroscopic analyses for the cycled cell.

페로브스카이트 구조를 가지는 CoFeX3(X = O, F, S, Cl) 합금의 자성과 전자구조에 대한 제일원리계산 (First Principle Studies on Magnetism and Electronic Structure of Perovskite Structured CoFeX3 (X = O, F, S, Cl))

  • 제갈소영;홍순철
    • 한국자기학회지
    • /
    • 제26권6호
    • /
    • pp.179-184
    • /
    • 2016
  • 스핀전달토크(Spin-Transfer Torque: STT) MRAM의 상용화를 위해서는 낮은 반전전류와 높은 열적 안정성을 동시에 만족해야 하고, 이를 위해서는 큰 스핀 분극, 강한 수직자기이방성 에너지을 가지는 물질이 요구된다. 본 연구에서는 STT-MRAM에 적합한 물질로 알려진 B2 CoFe 면심에 X(O, F, S, Cl) 원자가 위치한 $CoFeX_3$ 합금의 전자구조와 자기결정이방성(Magnetocrystalline anisotropy: MCA) 에너지를 계산하였다. X 원자가 F나 Cl일 때는 페르미 준위에서의 스핀 분극율이 각각 97 %, 96 %로, 반쪽 금속에 근접한 전자구조를 가짐을 확인할 수 있었다. 뿐만 아니라 표면이 Co 원자로 끝나는 5층 박막은 모든 X에 대해 수직 자기이방성를 가졌으며, 특히 $CoFeCl_3$의 자기이방성 에너지는 약 1.0 meV/cell로 상당히 컸다. 따라서 6, 7 족 원소를 잘 활용하면 높은 스핀 분극율과 강한 수직 자기이방성를 동시에 가지는 물질을 제조할 수 있게 되어 STT-MRAM의 상용화에 기여를 할 수 있을 것으로 기대한다.

사분파장 위상 간섭계 폴리머 광집적회로 기반 광전류센서의 온도 안정성 향상 연구 (Improvement of Thermal Stability of Optical Current Sensors Based on Polymeric Optical Integrated Circuits for Quadrature Phase Interferometry)

  • 천권욱;김성문;박태현;이은수;오민철
    • 한국광학회지
    • /
    • 제30권6호
    • /
    • pp.249-254
    • /
    • 2019
  • 광섬유가 지니는 패러데이 효과를 이용하여 전류의 세기를 측정하는 광전류 센서 소자를 설계 및 제작하였다. 센서 소자의 동작 안정성을 향상시키기 위하여 편광회전 반사 간섭계와 사분 파장 위상 간섭계 구조를 도입하였다. 이 복잡한 구조를 구성하는 다양한 광소자들은 하나의 폴리머 광집적회로로 구성하여 작은 크기로 제작되었다. 본 구조를 이용하면 외부에서 별도의 바이어스 피드백 제어가 필요 없는 상태에서 전류를 측정하는 센싱 동작을 수행할 수 있다. 또한 온도변화나 외부진동으로 인한 광센서 특성 변화를 제거하여 안정적인 특성을 유지하는 광전류센서를 구현할 수 있다. 그러나 패러데이 효과를 결정짓는 베르데상수는 온도에 따라 미소한 값의 변화를 가지고 있다. 본 연구에서는 이 변화로 인한 광전류센서의 온도의존성을 극복하기 위한 연구를 수행하였다. 편광회전 반사 간섭계의 부품인 광섬유 사분 파장판의 길이를 최적값으로부터 벗어나는 상태로 맞추어 줌으로써 베르데 상수의 온도의존성에 의해 나타나는 광전류센서의 스케일 팩터 변화를 보상해줄 수 있었다. 온도변화를 보상한 광전류센서는 주변 온도를 상온에서 85℃로 올리는 동안, 센서 측정 신호의 온도 의존성이 0.2% 이내로 유지되는 것을 확인했다.