• ETRI Journal
• /
• v.43 no.2
• /
• pp.184-196
• /
• 2021

The research domain of underwater communication has garnered much interest among researchers exploring underwater activities. The underwater environment differs from the terrestrial setting. Some of the main challenges in underwater communication are limited bandwidth, low data rate, propagation delay, and high bit error rate (BER). As such, this study assessed the underwater acoustic (UWA) aspect and explored the expression of error performance based on t-distribution noise. Filter orthogonal frequency-division multiplexing refers to a new waveform candidate that has been adopted in UWA, along with turbo and polar codes. The empirical outcomes demonstrated that the noise did not adhere to Gaussian distribution, whereas the simulation results revealed that the filter applied in orthogonal frequency-division multiplexing could significantly suppress out-of-band emission. Additionally, the performance of the turbo code was superior to that of the polar code by 2 dB at BER 10-3.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.64-66
• /
• 2012

본 논문에서는 각기 다른 자료를 지닌 두 송신자가 하나의 수신자에게 릴레이를 거쳐 자료를 전송하는 Ynetwork 시스템에서 Polar code 의 구조적인 특징을 이용해 오류율을 줄여 전송할 수 있는 방법을 제안한다. Polar code 는 부호의 길이 N 이 커짐에 따라 임의의 B-DMC(Binary-Discrete Memoryless Channel)에 대해 채널 용량을 달성할 수 있는 부호이며 반복적인 구조로 인해 부호화와 복호화 복잡도가 낮은 장점을 가진 부호이다. 이러한 성질을 이용해 Y-network 시스템의 릴레이에서 간단한 이진 모듈로 덧셈으로 전체 부호의 길이를 늘려 전송효율을 높일 수 있다.

• Spatial Information Research
• /
• v.22 no.5
• /
• pp.19-26
• /
• 2014

International attention on the Northern Sea Route has been increased as the decreased sea-ice extents in Northern Sea raise the possibility to develop new sea routes and natural resources. However, to protect ships' safety and pristine environments in polar waters, International Maritime Organization(IMO) has been developing the Polar Code to regulate polar shipping. The marine navigation supporting system is essential for ships traveling long distance in the Northern Sea as they are affected by ocean weather and sea-ice. Therefore, to cope with the IMO Polar Code, this research proposes the functional requirements to develop the marine navigation supporting system for the Northern Sea Route. The functional requirements derived from the IMO Polar code consist of arctic voyage risk map, arctic voyage planning and MSI(Marine Safety Information) methods, based on which the navigation supporting system is able to provide dynamic and safe-economical sea route service using the sea-ice observation and prediction technologies. Also, a requirement of the system application is derived to apply the marine navigation supporting system for authorizing ships operating in the Northern Sea. To reflect the proposed system in the Polar Code, continual international exchange and policy proposals are necessary along with the development of sea-ice observation and prediction technologies.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.3
• /
• pp.376-384
• /
• 2018

Selection of suitable ice class for ships operation is an important but not simple task. The increased exploitation of the Polar waters, both seasonal periods and geographical areas, as well as the introduction of new international design standards such as Polar Code, reduces the relevancy of using existing experience as basis for the selection, and new methods and knowledge have to be developed. This paper will analyse what can be the limiting ice thickness for ships navigating in the Russian Arctic and designed according to the Finnish-Swedish ice class rules. The permanent deformations of ice-strengthened shell structures for various ice classes is determined using MT Uikku as the typical size of a vessel navigating in ice. The ice load in various conditions is determined using the ARCDEV data from the winter 1998 as the basic database. By comparing the measured load in various ice conditions with the serviceability limit state of the structures, the limiting ice thickness for various ice classes is determined. The database for maximum loads includes 3-weeks ice load measurements during April 1998 on the Kara Sea mainly by icebreaker assistance. Gumbel 1 distribution is fitted on the measured 20 min maximum values and the data is divided into various classes using ship speed, ice thickness and ice concentration as the main parameters. Results encouragingly show that present designs are safer than assumed in the Polar Code suggesting that assisted operation in Arctic conditions is feasible in rougher conditions than indicated in the Polar Code.

• Journal of electromagnetic engineering and science
• /
• v.11 no.4
• /
• pp.239-249
• /
• 2011

In this paper, we propose a reliable $8{\times}8$ up-down switching polar relay code based on 3GPP LTE standard, motivated by 3GPP LTE down link, which is 30 bps/Hz for $8{\times}8$ MIMO antennas, and by Arikan's channel polarization for the frequency selective fading (FSF) channels with the generator matrix $Q_8$. In this scheme, a polar encoder and OFDM modulator are implemented sequentially at both the source node and relay nodes, the time reversion and complex conjugation operations are separately implemented at each relay node, and the successive interference cancellation (SIC) decoder, together with the cyclic prefix (CP) removal, is performed at the destination node. Use of the scheme shows that decoding at the relay without any delay is not required, which results in a lower complexity. The numerical result shows that the system coded by polar codes has better performance than currently used designs.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.41-41
• /
• 2017

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.24-36
• /
• 2011

In this paper, we verify the channel synthesis and decomposition of polar codes using successive cancellation decoding algorithm over binary discrete memoryless symmetric channel by modifying Arikan's algebraic formular on encoding and decoding of polar codes. In addition, we found that information bits are sent by efficiently consisting of polar codes with their size $2^n$ through polarizing matrix ${G_2}^{{\otimes}n}$ over binary discrete memoryless symmetric channel W. Expecially, if $N{\geq}2$, the complexity of Arikan's encoding and decoding for polar codes is O($Nlog_2N$). Furthermore, we found that polar codes are one of the solution to the challenging problems for the multipoint communication.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.42-48
• /
• 2008

Next generation wireless communication systems require RF transceivers that enable multiband/multimode operations. Polar transmitters are known as good candidates for high data rate systems such as EDGE (Enhanced Data Rates for GSM Evolution), WCDMA (Wideband Code Division Multiple Access), and WLAN (Wireless Local Area Network) because they can obtain high efficiency by using efficient switched-mode RF power amplifiers. In this paper, we investigate the performance of a simple peak windowing scheme for the OFDM (Orthogonal frequency Division Multiplexing) polar transmitter, which requires no change of a receiver structure or no additional information transmission. The approach we employed is to apply the peak windowing scheme to the amplitude modulated signals of the polar transmitter to reduce the PAPR (Peak-to-Average Power Ratio). The BER (Bit Error Rate) and EVM (Error Vector Magnitude) performances are measured for various window types and lengths. The simulation results demonstrate that the proposed algorithm mitigates out-of-band distortion introduced by clipping along with PAPR reduction.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.3
• /
• pp.427-435
• /
• 2015

This paper presents a high-throughput low-complexity decoder architecture and design technique to implement successive-cancellation (SC) polar decoding. A novel merged processing element with a one's complement scheme, a main frame with optimal internal word length, and optimized feedback part architecture are proposed. Generally, a polar decoder uses a two's complement scheme in merged processing elements, in which a conversion between two's complement and sign-magnitude requires an adder. However, the novel merged processing elements do not require an adder. Moreover, in order to reduce hardware complexity, optimized main frame and feedback part approaches are also presented. A (1024, 512) SC polar decoder was designed and implemented using 40-nm CMOS standard cell technology. Synthesis results show that the proposed SC polar decoder can lead to a 13% reduction in hardware complexity and a higher clock speed compared to conventional decoders.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.109-117
• /
• 2013

Polar codes are the first provable error correcting code achieving the symmetric channel capacity in a wide case of binary input discrete memoryless channel(BI-DMC). However, finite length polar codes have an error floor problem with successive-cancellation list(SCL) decoder. From previous works, we can solve this problem by concatenating CRC(Cyclic Redundancy Check) codes. In this paper we propose to make polar codes having extended-minimum distance from original polar codes without outer codes using correlation with generate matrix of polar codes and that of RM(Reed-Muller) codes. And we compare performance of proposed polar codes with that of polar codes concatenating CRC codes.