• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.917-921
• /
• 2013

This paper have analyzed the change of breakdown voltage for conduction path of double gate(DG) MOSFET. The low breakdown voltage among the short channel effects of DGMOSFET have become obstacles of device operation. The analytical solution of Poisson's equation have been used to analyze the breakdown voltage, and Gaussian function been used as carrier distribution to analyze closely for experimental results. The change of breakdown voltages for conduction path have been analyzed for device parameters such as channel length, channel thickness, gate oxide thickness and doping concentration. Since this potential model has been verified in the previous papers, we have used this model to analyze the breakdown voltage. Resultly, we know the breakdown voltage is greatly influenced on the change of conduction path for device parameters of DGMOSFET.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1925-1930
• /
• 2014

This paper has analyzed the relation of conduction path and subthreshold swing for doping profile in channel of asymmetric double gate(DG) MOSFET. Since the channel size of asymmetric DGMOSFET is greatly small and number of impurity is few, the high doping channel is analyzed. The analytical potential distribution is derived from Possion's equation, and Gaussian distribution function is used as doping profile. The conduction path and subthreshold swing are derived from this analytical potential distribution, and those are investigated for variables of doping profile, projected range and standard projected deviation, according to the change of channel length and thickness. As a result, subthreshold swing is reduced when conduction path is approaching to top gate, and that is increased with a decrease of channel length and a increase of channel thickness due to short channel effects.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.623-631
• /
• 2007

In this paper, dynamic elastic module of banded gneiss were calculated on the basis of SPS velocity logging data obtained from a geotechnical test-hole in Pungsan-dong, Hanam, Gyeonggi Province, Korea. This study mainly focuses on the velocity analysis, Q factor calculation relative to attenuation factor, and generation of crack information and its relation with seismic velocity. As a result, P-wave and S-wave velocity of fresh hard rock was 5,559m/s and 3,063m/s, respectively, with Poisson's ratio being 0.28. With these results, dynamic modules were prepared, and crack information analyzed by acoustic televiewer was incorporated to identify the correlation among and between delay of first arrival by crack amplitude ratio, and velocity. The results of this study revealed that the analyzed logging hole mainly consisted of micro crack and a number of cracks and the size of crack aperture, functioned as a variable to seismic velocity in the micro crack area of this type of hard rock.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.107-114
• /
• 2011

Today the company adopts to use information management method at the network base such as internet, intranet and so on for the speed of business. Therefore the security of information asset protection and continuity of business within company in relation to this is directly connected to the credibility of the company. This paper secures continuity to the certified users using queuing model for the business interruption issue caused by DDoS attack which is faced seriously today. To do this I have reflected overloaded traffic improvement process to the queuing model through the analysis of related traffic information and packet when there occurs DDoS attack with worm/virus. And through experiment I compared and analyzed traffic loading improvement for general network equipment.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.7
• /
• pp.3105-3112
• /
• 2014

Purpose: To examine breast cancer (BC) incidence trends in relation to mammographic screening and risk factor prevalence in South Australia (SA). Materials and Methods: Trends in annual BC incidence rates were calculated using direct standardisation and compared with projected incidence derived from Poisson regression analysis of pre-screening rates. Annual percentage change and change time points were estimated using Joinpoint software. Biennial mammography screening participation rates were calculated using data from BreastScreen SA. Trends in overweight/obesity, alcohol use and hormone replacement therapy (HRT) use were examined using 1991-2009 Health Omnibus Survey data. Trends in total fertility were examined using data from the Australian Bureau of Statistics. Results: BC incidence increased around the time BreastScreen commenced and then stabilised in the mid-1990s. However rates have remained higher than projected, even though the proportion and age distribution of first time screening attendees stabilised around 1998. A decrease in BC incidence was observed among women aged 50-59yrs from the late-1990's but not among older women. Obesity and alcohol use have increased steadily in all age groups, while HRT use declined sharply from the late-1990s. Conclusions: BC incidence has remained higher than projected since mammography screening began. The sustained elevation is likely to be due to lead time effects, though over-diagnosis cannot be excluded. Declining HRT use has also impacted incidence trends. Implications: Studies using individual level data, which can account for changes in risk factor prevalence and lead time effects, are required to evaluate 'over-diagnosis' due to screening.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.5
• /
• pp.939-951
• /
• 2002

We propose a new multiscale Galerkin method based on interpolation wavelets for two-dimensional Poisson's and plane elasticity problems. The major contributions of the present work are: 1) full multiresolution numerical analysis is carried out, 2) general boundaries are handled by a fictitious domain method without using a penalty term or the Lagrange multiplier, 3) no special integration rule is necessary unlike in the (bi-)orthogonal wavelet-based methods, and 4) an efficient adaptive scheme is easy to incorporate. Several benchmark-type problems are considered to show the effectiveness and the potentials of the present approach. is 1-2m/s and impact deformation of the electrode depends on the strain rate at that velocity, the dynamic behavior of the sinter-forged Cu-Cr is a key to investigate the impact characteristics of the electrodes. The dynamic response of the material at the high strain rate is obtained from the split Hopkinson pressure bar test using disc-type specimens. Experimental results from both quasi-static and dynamic compressive tests are Interpolated to construct the Johnson-Cook model as the constitutive relation that should be applied to simulation of the dynamic behavior of the electrodes. The impact characteristics of a vacuum interrupter are investigated with computer simulations by changing the value of five parameters such as the initial velocity of a movable electrode, the added mass of a movable electrode, the wipe spring constant, initial offset of a wipe spring and the virtual fixed spring constant.

• Journal of Korea Technology Innovation Society
• /
• v.17 no.3
• /
• pp.449-466
• /
• 2014

There have been various researches on the relationship between a company's R&D investment and the outcome from innovation. However, these studies failed to effectively analyze the decision-making process followed by companies in relation to knowledge production. Especially, in analyzing the patent of companies, the Poisson model has been commonly used, but its limitations have been pointed out. In recent years, many studies have adopted negative binomial models, but they still pose limitations in analyzing the selection process. This paper proposed a hurdle negative binomial model to effectively reflect the company's decision embedded within patent information and conduct an empirical analysis on a survey of businesses' activities. In particular, the study analyzed the selection process of companies in determining the number of patents. As a result of estimation, the presence of over-dispersion was identified. In addition, the Wald-test confirmed that setting up of hurdles was valid, and there was a difference between the results of hurdle models and those of general negative binomial settings.

• Geophysics and Geophysical Exploration
• /
• v.25 no.2
• /
• pp.85-92
• /
• 2022

An elongated object in one direction can be approximated as a line segment. Here, the closed-form expressions of a line segment's vector magnetic and magnetic gradient tensor are required to interpret responses by a line segment. Therefore, the analytical expressions of the vector magnetic and magnetic gradient tensor are derived. The vector magnetic is converted from the existing gravity gradient tensor using Poisson's relation where the gravity gradient tensor caused by a line segment can be transformed into a vector magnetic. Then, the magnetic gradient tensor is derived by differentiating the vector magnetic with respect to each axis in the Cartesian coordinate system. The synthetic total magnetic data simulated by an iron pile on boreholes are inverted by a nonlinear inversion process so that the physical parameters of the iron pile, including the beginning point, the length, orientation, and magnetization vector are successfully estimated.

• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.423-433
• /
• 2012

The axial load on the concrete-filled steel tube (CFT) column produces confinement stress, which enhances strength of the core concrete. The amount of strength increase in concrete depends on the magnitude of produced confinement stress. From nonlinear analyses, the ultimate resisting capacity of the CFT columns subjected to axial loads was calculated. Nonlinear material properties such as Poisson's ratio and stress-strain relation were considered in the suggested model, and the maximum confining stress was obtained by multi axial yield criteria of the steel tube. This proposed model was verified by comparing the analytical results with experimental results. Then, regression analyses were conducted to predict the maximum confining stress according to D/t ratio and material properties without rigorous structural analysis. To ensure the validity of the suggested regression formula, various empirical formulas and Eurocode4 design code were compared.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.97-105
• /
• 2011

This paper presents how one can investigate the effects on crash occurrence of freeway geometric design elements including the horizontal, vertical alignment and road environment. At present, the available research results for the most part involve geometric data analysis that are obtained along a relatively long section of freeway, and, because of the long section's diverse geometric conditions, the results tend to miss the specific local geometric impacts on vehicle crashes. In this regard, this research attempts to establish vehicle crash models based on a set of freeway geometric patterns whose crash generating characteristics are identical because they are homogeneous in terms of producing the same vehicle operating speeds, and subsequently their actual relationships are described by providing statistical analysis made in this research. Also each standard is comprised of part of straight, curve and continuous curve. This research has revealed that each type of model has different relation between accident and geometry structure. This research results should be useful for doing more reasonable highway designs and safety audit analysis.