• Structural Engineering and Mechanics
• /
• 제55권4호
• /
• pp.871-884
• /
• 2015

In the present study, separate and combined effects of rotary inertia, shear deformation and material non-homogeneity (MNH) on the values of natural frequencies of the simply supported beam are examined. MNH is characterized considering the parabolic variations of the Young's modulus and density along the thickness direction of the beam, while the value of Poisson's ratio is assumed to remain constant. At first, the equation of the motion including the effects of the rotary inertia, shear deformation and MNH is provided. Then the solutions including frequencies of the first three modes for various combinations of the parameters of the MNH, depth to length ratios, and shear corrections factors are reported. To show the accuracy of the present results, two comparisons are carried out and good agreements are found.

• 대한전자공학회논문지
• /
• 제21권2호
• /
• pp.71-82
• /
• 1984

2차원 n-p-n 바이폴라 트랜지스터의 수치해석을 위한 프로그램(BIPOLE)을 개발하였다. 이 프로그램은 SRH와 Auger 재결합 기구들과 불순물 농도와 전계강도에 대한 운송자 이동도의 의존성과 밴드 갭 축소 효과들을 포함하고 있다. Poisson 방정식에는 Newton법을 또 정공과 전자의 연속 방정식에는 발산이론을 이용하여 여러가지 물리적인 제한없이 기본 반도체 방정식들에 대한 유한차분 공식들을 만들었다. 선형화된 방정식들의 계수 행렬은 희소 대칭 M 행렬이었는데 그 해를 구하기 위해 ICCG법과 Gummel의 알고리즘을 적용하였다. 이 프로그램 BIPOLE를 n-p-n 트랜지스터의 여러가지 정상 상태 문제에 적용시켰다. 그 응용의 보기로서 공통 에미터 전류이득의 변화, 에미터 용량에 대한 확산용량이 미치는 영향과 입출력 특성곡선들을 계산해 보았다. 전위 분포와 전자와 정공 농도분포와 같은 계산 결과를 3차원 컴퓨터 그래픽으로 도시하였다. 이 프로그램은 장차 2차원 트랜지스터의 교류 및 왜곡 현상의 수치해석의 기초로 이용될 것이며, 이 프로그램에 관심있는 모든 분들께 공급될 것이다.

• 한국입자에어로졸학회지
• /
• 제5권3호
• /
• pp.123-131
• /
• 2009

This paper presents simulation results of particle transport in low-pressure, low-temperature plasma environment. The size dependent transport of particles in the plasma is investigated with a two-dimensional simulation tool developed in-house for plasma chamber analysis and design. The plasma model consists of the first two and three moments of the Boltzmann equation for ion and electron fluids respectively, coupled to Poisson's equation for the self-consistent electric field. The particle transport model takes into account all important factors, such as gravitational, electrostatic, ion drag, neutral drag and Brownian forces, affecting the motion of particles in the plasma environment. The particle transport model coupled with both neutral fluid and plasma models is simulated through a Lagrangian approach tracking the individual trajectory of each particle by taking a force balance on the particle. The size dependant trap locations of particles ranging from a few nm to a few ${\mu}m$ are identified in both electropositive and electronegative plasmas. The simulation results show that particles are trapped at locations where the forces acting on them balance. While fine particles tend to be trapped in the bulk, large particles accumulate near bottom sheath boundaries and around material interfaces, such as wafer and electrode edges where a sudden change in electric field occurs. Overall, small particles form a "dome" shape around the center of the plasma reactor and are also trapped in a "ring" near the radial sheath boundaries, while larger particles accumulate only in the "ring". These simulation results are qualitatively in good agreement with experimental observation.

• 반도체디스플레이기술학회지
• /
• 제8권3호
• /
• pp.31-37
• /
• 2009

This paper presents one and two dimensional simulation results with discontinuous features (shocks) of capacitively coupled rf plasmas. The model consists of the first two and three moments of the Boltzmann equation for the ion and electron fluids respectively, coupled to Poisson's equation for the self-consistent electric field. The local field and drift-diffusion approximations are not employed, and as a result the charged species conservation equations are hyperbolic in nature. Hyperbolic equations may develop discontinuous solutions even if their initial conditions are smooth. Indeed, in this work, secondary electron emission is shown to produce transient electron shock waves. These shocks form at the boundary between the cathodic sheath (CS) and the quasi-neutral (QN) bulk region. In the CS, the electrons emitted from the electrode are accelerated to supersonic velocities due to the large electric field. On the other hand, in the QN the electric field is not significant and electrons have small directed velocities. Therefore, at the transition between these regions, the electron fluid decelerates from a supersonic to a subsonic velocity in the direction of flow and a jump in the electron velocity develops. The presented numerical results are consistent with both experimental observations and kinetic simulations.

• Advances in Computational Design
• /
• 제9권1호
• /
• pp.39-52
• /
• 2024

If the governing differential equation arising from engineering problems is treated as an analytic, continuous and derivable function, it can be expanded by one point as a series of finite numbers. For the function to be zero for each value of its domain, the coefficients of each term of the same power must be zero. This results in a recursive relationship which, after applying the natural conditions or the boundary conditions, makes it possible to obtain the values of the derivatives of the function with acceptable accuracy. The elastoplastic analysis of an inhomogeneous thick sphere of metallic materials with linear variation of the modulus of elasticity, yield stress and Poisson's ratio as a function of radius subjected to internal pressure is presented. The Beltrami-Michell equation is established by combining equilibrium, compatibility and constitutive equations. Assuming axisymmetric conditions, the spherical coordinate parameters can be used as principal stress axes. Since there is no analytical solution, the natural boundary conditions are applied and the governing equations are solved using a proposed new method. The maximum effective stress of the von Mises yield criterion occurs at the inner surface; therefore, the negative sign of the linear yield stress gradation parameter should be considered to calculate the optimal yield pressure. The numerical examples are performed and the plots of the numerical results are presented. The validation of the numerical results is observed by modeling the elastoplastic heterogeneous thick sphere as a pressurized multilayer composite reservoir in Abaqus software. The subroutine USDFLD was additionally written to model the continuous gradation of the material.

• 한국전산구조공학회논문집
• /
• 제18권3호
• /
• pp.291-302
• /
• 2005

구조응답에 기여하는 중요성으로 인하여 추계론적 해석에서는 재료탄성계수의 불확실성에 의한 응답변화도에 대한 연구가 주로 진행되어 왔다. 그러나 추계론적 해석이 의미있는 값을 제공하기 위해서는 가능한 많은 인수에 대한 불확실성을 동시에 고려하여야 한다. 본 연구에서는 구조재료의 중요한 두 인수인 탄성계수와 포아송비에 나타나는 불확실성을 고려한 추계론적 해석을 위한 정식화를 평면문제에 대하여 제안하였다. 이를 위하여 이들 두 인수의 함수로 주어지는 구성행렬의 각 요소에 대한 다항식 전개를 채용하였으며, 두 인수의 불확실성에 따라 나타나는 자기 및 상호상관함수는 n-차 모멘트에 대한 일반식을 적용하여 구성하였다. 다항식 전개에 따라 부행렬의 무한합으로 변형된 구성행렬은 계산상의 편의를 위하여 요구되는 정확도 내에서 절삭하여 사용하였다. 제안된 방법의 검증을 위하여 단순 평면구조를 예제로 택하여 해석하었으며, 해석결과는 국부평균법을 채용한 고전적인 몬테카를 해석 결과와 비교하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권2호
• /
• pp.67-73
• /
• 2003

The algorithm (or calculating the base-collector breakdown voltage of NPN BJT(Bipolar Junction Transistor) for integrated circuits is Proposed. The method for calculating the electric field using the solution of Poisson's equation is presented and the method for calculating the breakdown voltage using the integration of ionization coefficients is presented. The base-collector breakdown voltage of NPN BJT using 20V process obtained from the proposed method shows an averaged relative error of 8.0% compared with the measured data and the base-collector breakdown voltage of NPN BJT using 30V process shows an averaged relative error of 4.3% compared with the measured data

• 대한기계학회논문집
• /
• 제15권2호
• /
• pp.611-617
• /
• 1991

Effective stiffness of short fiber composite with a three-dimensional random orientation of fibers is derived theoretically and compared with available experimental data. The laminate analogy and transformed laminate analogy are used for modulus prediction of 2-D and 3-D random composites, respectively. The effective stiffness of random oriented fiber composite can be expressed in terms of longitudinal and transverse stiffnesses of unidirectional composites. The result of transformed laminate analogy is more accurate than other approaches such as, Christensen-Waals equational and Lavengood-Goettler equation, etc. Also the effective properties of random oriented fiber composite can be expressed in terms of fiber and matrix properties such as elastic modulus, shear modulus and Poisson's ratio.

• Journal of information and communication convergence engineering
• /
• 제9권3호
• /
• pp.310-314
• /
• 2011

This paper has presented doping profile dependent threshold voltage for DGMOSFET using analytical transport model based on Gaussian function. Two dimensional analytical transport model has been derived from Poisson's equation for symmetrical Double Gate MOSFETs(DGMOSFETs). Threshold voltage roll-off is very important short channel effects(SCEs) for nano structures since it determines turn on/off of MOSFETs. Threshold voltage has to be constant with decrease of channel length, but it shows roll-off due to SCEs. This analytical transport model is used to obtain the dependence of threshold voltage on channel doping profile for DGMOSFET profiles. Also we have analyzed threshold voltage for structure of channel such as channel length and gate oxide thickness.

• 동력기계공학회지
• /
• 제2권3호
• /
• pp.21-26
• /
• 1998

Numerical simulations for various fluid flows require enormous computing time during iterations. In order to solve this problem, several techniques have been proposed. A SOR method is one of the effective methods for solving elliptic equations. However, it is very difficult to find the optimum relaxation factor, the value of this factor for practical problems used to be estimated on the basis of expertise. In this paper, the implication of the relaxation factor are translated into fuzzy control rules on the basis of the expertise of numerical analysers, and fuzzy controller incorporated into a numerical algorithm. From two cases of study, Poisson equation and cavity flow problem, we confirmed the possibility of computational acceleration with fuzzy logic and qualitative reasoning in numerical simulations. Numerical experiments with the fuzzy controller resulted in generating a good performance.