• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3093-3099
• /
• 2014

Modern graphic processors, multimedia processors and audio processors mostly use floating-point number. Meanwhile, high-level language such as C and Java uses both single-precision and double precision floating-point number. In this paper, an algorithm which computes the reciprocal of double precision floating-point number using a 32 bit multiplier is proposed. It divides the mantissa of double precision floating-point number to upper part and lower part, and calculates the reciprocal of the upper part with Goldschmidt's algorithm, and computes the reciprocal of double precision floating-point number with calculated upper part reciprocal as the initial value is proposed. Since the number of multiplications performed by the proposed algorithm is dependent on the mantissa of floating-point number, the average number of multiplications per an operation is derived from some reciprocal tables with varying sizes.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.6
• /
• pp.31-37
• /
• 2013

Modern graphic processors, multimedia processors and audio processors mostly use floating-point number. High-level language such as C and Java use both single precision and double precision floating-point number. In this paper, an algorithm which computes the reciprocal of double precision floating-point number using a 32 bit multiplier is proposed. It divides the mantissa of double precision floating-point number to upper part and lower part, and calculates the reciprocal of the upper part with Newton-Raphson algorithm. And it computes the reciprocal of double precision floating-point number with calculated upper part reciprocal as the initial value. Since the number of multiplications performed by the proposed algorithm is dependent on the mantissa of floating-point number, the average number of multiplications per an operation is derived from some reciprocal tables with varying sizes.

• Journal of Acupuncture Research
• /
• v.21 no.1
• /
• pp.21-32
• /
• 2004

Objective: A study on $\ll$Lingchui, 靈樞 Weiqi, 衛氣$\gg$ which descripted Twelve meridian Biaoben(標本) pulse diagnosis method. Methods: A study on Twelve meridian Biaoben(標本) pulse diagnosis method which has the cognizance of Biaoben(標本) on upper and low twelve meridian as linear upper and low pulse diagnosis point. Results: Twelve meridian Biaoben(標本) pulse diagnosis method is derived from using each twelve meridian pulse diagnosis and it can be explained that the ben(本) pulse point on wrist ankle and the biao(標) pulse point on thorax axillary neck head face correspond to upper and low part of meridian for diagnosis and treatment which become the theory of "treat upper disease on low part, treat low disease on upper part". Conclusions: Twelve meridian Biaoben(標本) pulse diagnosis method started confirming the general concept of Jue-symptom(厥症) and Jue-symptom(絶症) and developed upper and low pulse diagnosis point or acupuncture point to treatment.

• Journal of Environmental Science International
• /
• v.23 no.3
• /
• pp.399-407
• /
• 2014

In this study, before and after sunset carbon dioxide concentration and air temperature were observed in two points of atmosphere (lower observation point of the GL + 0.1 m, the upper observation point of GL + 1.0 m) on the foreshore at located in Suncheon Bay and their variations were analyzed. Observation was performed on the foreshore on 2~4 August 2010. Instrument (VAISALA, GMP343) was set two hours before sunset and then observation was made continuously for six hours. In three days, observed carbon dioxide concentration was 375~419 ppm, and the air temperature was in the range of $28.7{\sim}32.5^{\circ}C$. The average concentration of carbon dioxide was 388~399 ppm in the upper observation point and 386~396 ppm in the lower observation point. It was higher in the upper observation point and its fluctuations were similar in two observation points. Correlation coefficients between carbon dioxide concentration and air temperature in the upper observation point were in the range of -0.64~-0.88, and were calculated -0.65 to -0.90 in the lower observation point. For the carbon dioxide concentration, correlation coefficients between the upper part and the lower part were very high as 0.98 in three times. For the air temperature, correlation coefficients between the upper part and the lower part were very high as 0.97 and 0.99. In the same observation time, the slope of the linear regression function as carbon dioxide concentration in the lower observation point for the upper observation point was in the range of 0.97~1.01. Carbon dioxide concentration was slightly higher in the upper observation point. Because carbon dioxide in the lower observation point was closer on the surface of the foreshore and absorbed from atmosphere to the foreshore. In this study, it was showed that the vertical variation of carbon dioxide concentration was insignificant in the several meter scale of atmosphere on the surface of the foreshore.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.1
• /
• pp.29-37
• /
• 1993

The purpose of this paper is to estimate the attitude and the position of SPOT satellite which are needed in producing DEM(Digital Elevation Model) using SPOT satellite image pairs. DEM extraction is consists of three parts. First part is the modeling of satellite position and atitude, second part is the matching of two images to find corresponding point of them and third part is to calculate the elevation of each point by using the result of the first and second part. For modeling inaccessible area, extended modeling algorithm which removes the GCP(Ground Control Point) most errorneous from the GCPs extracted from map iteratively is proposed According to the experiments using a collinearity equation, the second order polynomials are shown to the optimal for .omega.(pitch), and Zs parameters while the first order ones for .kappa.(yaw) .PHI.(roll), Xs, and Ys parameters. The input images used in this paper are 6000*6000 level 1A panchromatic digital SPOT images of Chungchong-do, Korea. With 30 GCPs, experiments on SPOT images show that the planimetric and altimetric RMS errors are 7.11m and 7.10m, respectively, for test points.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.10 no.2
• /
• pp.21-28
• /
• 1986

This paper is concerned with the mutual relationship among interpressure, last. foot within a new shoe and foot within a fifty-hour-used shoe at the standing posture at three different heel-heights 1. The interrelationship between the heel-heights and interpressure is very significant at the level of $0.1\%$. The heel-heights cause high interpressure at different parts of foot; heel point and big toe point in a 3 cm-heel shoe, big toe point and heel outside joint point in a 5 cm-heel shoe, and little toe point, heel-outside joint point, and arch point in a 7 cm-heel shoe. 2. Foot girth and foot width measurements either within a new shoe or within a fifty-hour-used shoe significant at the level of $5\%,\;1\%,\;0.1\%$ and show discrepancies at three different heel heights; the part between instep and ball joint in a 3 cm-heel shoe, toe part in a 5 cm-heel shoe, heel-inside joint. heel-outside joint and toe part in a 7 cm-heel shoe are highly influenced by heel heights. The higher the shoe-hee15 are, the more heavily the fore part of foot is pressured in lateral direction because shoe is made to have high instep from a fashion viewpoint. Higher shoe heels prevent weight pressure from being concentrated on heel. If shoe heels are toe high, people in such shoes feel easily tired. It is very worthy of note in selecting shoes to consider not only the shoe fashion but also fore shoe type, heel height, and shoe material with proper elasticity.

• Journal of Computational Design and Engineering
• /
• v.1 no.1
• /
• pp.48-54
• /
• 2014

In this paper, the authors propose a system for assisting mold designers of plastic parts. With a CAD model of a part, the system automatically determines the optimal ejecting direction of the part with minimum undercuts. Since plastic parts are generally very thin, many rib features are placed on the inner side of the part to give sufficient structural strength. Our system extracts the rib features from the CAD model of the part, and determines the possible ejecting directions based on the geometric properties of the features. The system then selects the optimal direction with minimum undercuts. Possible ejecting directions are represented as discrete points on a Gauss map. Our new point distribution method for the Gauss map is based on the concept of the architectural geodesic dome. A hierarchical structure is also introduced in the point distribution, with a higher level "rough" Gauss map with rather sparse point distribution and another lower level "fine" Gauss map with much denser point distribution. A system is implemented and computational experiments are performed. Our system requires less than 10 seconds to determine the optimal ejecting direction of a CAD model with more than 1 million polygons.

• The KIPS Transactions:PartD
• /
• v.8D no.3
• /
• pp.273-284
• /
• 2001

A systematic approach for interpreting Korean addresses based on postal code is presented in this paper. The implementation is focused on producing the final delivery point code from various types of address recognized. There are two stages in the address interpretation : 1) agreement verification between the recognized postal code and upper part of the address and 2) analysis of lower part of the address. In the agreement verification procedure, the recognized postal code is used as the key to the address dictionary and each of the retrieved addresses is compared with the words in the recognized address. As the result, the boundary between the upper part and the lower part is located. The confusion matrix, which is introduced to correct possible mis-recognized characters, is applied to improve the performance of the process. In the procedure for interpreting the lower part address, a delivery code is assigned using the house number and/or the building name. Several rules for the interpretation have been developed based on the real addresses collected. Experiments have been performed to evaluate the proposed approach using addresses collected from Kwangju and Pusan areas.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.431-436
• /
• 2005

In this paper, We proposed the stereo image modeling using 2-dimensional images captured by the high resolution cameras to inspect the ball defects of BGA(Ball Grid Array) device. The proposed algorithm consists of the package/ball area extraction part, the FOV(Field of View) calibration part, the top point matching part, and ball height measurement part, In the package/ ball area extraction part, the package and ball areas are separately extracted in a left and right image by the extraction algerian. Through the experiment, we draw out the result.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.10 no.16
• /
• pp.173-182
• /
• 1987

Motivation models based on the Psychology have contributed to Predict and understand individual behaviors. During the many period, a various type of motivation models have been experimented by the researchers(i.e., need theory that is the first theory in motivation and equity theory, expectancy theory, reinforcement theory, and goal-setting theory centered on cognitive mechanisms). This article's objectives is to analyze motivation models mentioned above in the point of cognitive views (cognitive processes and cognitive mechanisms). Accordingly, the article's structure is consisted of five parts as follows. Part 1. Introduction. Part 2. The theoritical backgrounds of motivation. Part 3. The major theories of motivation. Part 4. The cognitive analysis of motivation theories. Part 5. Conclusion.