• Korean Journal of Acupuncture
• /
• v.34 no.1
• /
• pp.37-46
• /
• 2017

Objectives : The acupuncture about acupoint affects the production of NO, NOS, and NE.Local action of acupuncture is important for acupuncture treatment. To prove this, the revelation degree of NO, NOS, and NE was observed by stimulating the acupuncture at the connecting point of SP4, KI4, and LR5 in the depths of Superficial layer, Middle layer and Deep layer. Methods : Needles were inserted into rats, on each right and left sides of the connecting point, SP4, KI4 and LR5 acupoints which are the stream points of the foot meridian. After insertion, needles were retained for three minutes. After the retention, rat was sacrificed via cardiac puncture, and tissues of each SP4, KI4 and LR5 point near meridian vessel was extracted to examine the changes in the expression of NO, NOS and NE. Results : In terms of the effect in NO production, there was significant increase in the Superficial layer, Middle layer and Deep layer at KI4. In terms of the effect in NE production, there was significant decrease in the Superficial layer at SP4 and increase in the Superficial layer, Middle layer and Deep layer at LR5. In terms of the effect in nNOS production, there was significant increase in the Superficial layer, Middle layer and Deep layer at SP4 also in the Superficial layer at KI4. In terms of the effect in eNOS production, there was a significant increase in the Superficial layer, Middle layer and Deep layer at SP4, KI4 and LR5. In terms of the effect in iNOS production, there was significant increase in the Superficial layer, Middle layer and Deep layer at SP4, KI4 and LR5. Conclusions : The effect of acupuncture applied at the connecting point of six meridians of the foot on the activities of NO, NOS and NE could be observed, and it can be induced from the effect of needle stimulation on disrupted local and systemic nervous responses.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.2
• /
• pp.129-136
• /
• 2005

The movement ranges and diurnal behavior of the rockfish (Sebastes schlegeli) sonic tagged externally were measured by the acoustic telemetry in the marine ranching area of Tongyoung on 20 to 26 March and 4 October to 3 November, 2003. The results of study are as follows: 1. Two cage cultured fishes (body length: $30-34{\cal}cm$) were released the point where located approximately $250{\cal}m$ from the caught point on 30 March, 2003. They moved to the south $500{\cal}m$ away Sojangdudo and stayed within a $500{\cal}m$ radius of the position during the study. 2. Three wild fishes (body length: $28-32{\cal}cm$) were released around the caught point on 4 and 8 October, 2003. It was often measured that tagged fishes moved out the $500{\cal}m$ radius of released point for a week after release. After several days, the movement range tended to be reduced. Finally, they stayed within the $250{\cal}m$ radius of released point. 3. There was no significant difference of diurnal behavior of the rockfish between the cage cultured and the wild fishes. The movement range, however, for the night-time was a little wider than for the day-time.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.7
• /
• pp.471-475
• /
• 2016

In the present study, temperature evaluations on long-term storage of radioactive waste produced in the process of isotope production were performed using two different methods. Three-dimensional analysis was carried out assuming a volumetric heat source, while two-dimensional studies were performed assuming a point source. The maximum temperature difference between the predictions of the volumetric and point source models was approximately $5^{\circ}C$. For the conceptual design level, a point source model may be suitable to obtain the overall temperature characteristics of different loading locations. For more detailed analysis, the model with the volumetric source may be applicable to optimize the loading pattern in order to obtain minimum temperatures.

• Advances in Energy Research
• /
• v.4 no.1
• /
• pp.69-86
• /
• 2016

The quest to reduce the level of overdependence on fossil fuel product and to provide all required information on proven existing alternatives for renewable energy has resulted into rapid growth of research globally to identify efficient alternative renewable energy sources and the process technologies that are sustainable and environmentally friendly. The present study is aimed at production and characterization of bioethanol produced from sugarcane juice using a $2^4$ factorial design investigating the effect of four parameters (reaction temperature, time, concentration of bacteria used and amount of substrate). The optimum bioethanol yield of 19.3% was achieved at a reaction temperature of $30^{\circ}C$, time of 72 hours, yeast concentration of 2 g and 300 g concentration of substrate (sugarcane juice). The result of statistical analysis of variance shows that the concentration of yeast had the highest effect of 7.325 and % contribution of 82.72% while the substrate concentration had the lowest effect and % contribution of -0.25 and 0.096% respectively. The bioethanol produced was then characterized for some fuel properties such as flash point, specific gravity, cloud point, pour point, sulphur content, acidity, density and kinematic viscosity. The results of bioethanol characterization conform to American society for testing and materials (ASTM) standard. Hence, sugarcane juice is a good and sustainable feedstock for bioethanol production in Nigeria owing relative abundance, cheap source of supply and available land for large scale production.

• KSBB Journal
• /
• v.29 no.4
• /
• pp.225-231
• /
• 2014

A microbial fuel cell (MFC) and bioelectrochemical systems are novel bioprocesses which employ exoelectrogenic biofilm on electrode as a biocatalyst for electricity generation and various useful chemical production. Previous reports show that electrogenic biofilms of MFCs are time varying systems and dynamically interactive with the electrically conductive media (carbon paper as terminal electron acceptor). It has been reported that maximum power point tracking (MPPT) method can automatically control load by algorithm so that increase power generation and columbic efficiency. In this study, we developed logic based control strategy for external load resistance by using $LabVIEW^{TM}$ which increases the power production with using flat-plate MFCs and MPPT circuit board. The flat-plate MFCs inoculated with anaerobic digester sludge were stabilized with fixed external resistance from $1000{\Omega}$ to $100{\Omega}$. Automatic load control with MPPT started load from $52{\Omega}$ during 120 hours of operation. MPPT control strategy increased approximately 2.7 times of power production and power density (1.95 mW and $13.02mW/m^3$) compared to the initial values before application of MPPT (0.72 mW and $4.79mW/m^3$).

• Journal of Environmental Health Sciences
• /
• v.24 no.1
• /
• pp.80-86
• /
• 1998

Seom River was major branch of Namhan river, consist of primary basin that Wonjoo-city, Hoingsung-gun and primary contamination source was sewage from human lives. This study was evaluated production contamination loading of each branch basin and water quality grade and water quality simulation by QUAL2E to provide efficient contaminations source control. Rusult of survey, production loading of BOD, T-N, T-P were 26,591 kg/day, 4,560 kg/day, 731 kg/day resectively. Water quality analysis in 17 points of main stream were appeared that 1st grade(BOD 1 mg/l under) was 6 point, 2nd grade was 9 point and 3rd grade was 2 point. And result of water quality analysis for branch steram, first grade was evaluated 68.7%. Based of field data, calibration and verification result were in good agreement with mesured value within coefficient of variance were from 2.59% to 18.73%, from 6.39%, to 28.46%, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.445-446
• /
• 2019

Recently, attention has been focused on mixed reality (MR) technology, which provides an experience that can not be realized in reality by fusing virtual information into the real world. Mixed reality has the advantage of having excellent interaction with reality and maximizing immersion feeling. In this paper, we propose a method to acquire a point cloud for the production of mixed reality contents using multiple Depth and RGB camera system.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.2
• /
• pp.221-228
• /
• 2012

This paper analyzed twenty-six production-related KPI(Key Performance indicator) factors of business diagnosis, such as personnel, equipment, materials, operations and quality affecting company business competition to 186 small machinery manufacturers in 2010. Also, we explained the concept of Business Positioning and divided research subjects into four Business Positioning Groups formed break-even point ratio & fixed cost ratio to sales and then we compared between the 4 groups using Logistic Regression analysis by SAS statistical software package. The objective of this study is two-fold. The first is to find out production-related KPI factor of superior Business Positioning Group. The second is to suggest improvement ways for small manufacturers in order to get better profitable Business Positioning.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.28-29
• /
• 2015

The tire production facility is a large-scale construction with the complexity of a manufacturing process. The process utilities should be wide-ranging as an effective arrangement of them is highly important. All the necessary information should be clarified together with the manufacturer at the basic planning stage, and this design should be developed to comply with the local culture and regulations. It is important to carry out more advanced engineering in terms of process, cost and quality, even if it is difficult to standardize due to the cultural and geographical conditions and regulations. The key point is to reflect all the given conditions and make a clear design during the design stage, to eliminate the problems after the construction has begun. Another key point is the delivery system, which must be totally managed from the initial design stage until the construction stage by proven companies. Flexibility, quick action, and single responsibility will be the fundamental features in all the steps of the project.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.3
• /
• pp.133-138
• /
• 2019

BACKGROUND: Production function gives the equation that shows the relationship between the quantities of productive factors used and the amount of product obtained, and can answer a variety of questions. This study was carried out to evaluate the relationship between irrigation water used for rice production and rice productivity by the production function which shows the mathematical relation between input and output. METHODS AND RESULTS: The statistical data on rice production and on the amount of irrigation water were used for the production function analysis. The analysis period was separated for 1966-1981 and 1982-2011, based on goal's change on agriculture from 'increasing food' to 'complex farming'. The relation between irrigation and yield considering production function is a short-term production function both before and after 1982. These results can be expressed by the sigmoid relation. When comparing the graphs of the two analyzed periods, there are differences in quantity between the maximum point and the minimum point during the same analysis period, which can be called an 'Irrigation Effect' by the difference of irrigation, and 'Technical Effect' by the difference by inputs like as fertilizers etc. CONCLUSION: The results could be useful as information for assessing the relationship between agricultural water and the productivity of rice and predicting rice productivity by irrigation water in Korea.