• 비파괴검사학회지
• /
• 제22권6호
• /
• pp.637-642
• /
• 2002

An arc-shaped line array slit has been used for the laser generation of focused Lamb waves. The spatially expanded Nd:YAG pulse laser was illuminated through the arc-shaped line array slit on the surface of a sample plate to generate the Lamb waves of the same pattern as the slit. Then the generated Lamb waves were focused at the focal point of which distance from the slit position is dependent on the curvature of slit arc. The proposed method showed better spatial resolution than the conventional linear array slit in the detection of laser machined linear defect and drill machined circular defect on aluminum plates of 2mm thickness. Using the focused waves, we could detect the linear defect and the circular defect with the improvement of spatial resolution. The method can also be combined with the scanning mechanism to get an image just like by the scanning acoustic microscope(SAM).

• 한국전기전자재료학회논문지
• /
• 제26권1호
• /
• pp.27-32
• /
• 2013

According to the composition of LTCC material, though it was thought that bulk defect which was made in forming process effects on the densification during the sintering, it was not reported systemically. In this study, we evaluated crystal structure, 3 point bending strength, hardness and microstructure of the samples by uniaxial pressing and tape casting using the commercial powders of the crystallizing glass and the glass/ceramic composite. In the case of glass/ceramic composite, Viox-001 powder with residual glass in the sintering, 3 point bending strength was similar regardless of forming process due to fill the bulk defect by residual glass. In the case of crystallizing glass, MLS-22, because glass phase was small in the sintering, glass did not fill the pore in the sample by uniaxial pressing process, therefore, the 3 point bending strength of it was 167 MPa. However, the 3 point bending strength of the sample by tape casting was 352 MPa and much higher. Meanwhile, crystal structure and hardness were similar regardless of forming process.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.253-261
• /
• 2005

In decades, a substantial body of work on a unified viscoplastic model which considers the mechanism of plastic deformation and creep deformation has developed. The systematic scheme for numerical analysis of unified model is necessary because the dominant failure mechanism is the defect growth and coalescence in materials. In the present study, the unified viscoplastic model for materials with defects suggested by Suquet and Michel was employed for numerical analysis. The constitutive equations are integrated based on the generalized mid-point rule and implemented into a finite element program (ABAQUS) by means of user-defined subroutine (UMAT). To evaluate the validity of the developed UMAT code and the assessment of the adopted viscoplastic model, the results obtained from the UMAT code was compared with the numerical reference solution and experimental data. The unit cell analysis also has been investigated to study the effect of strain rate, temperature, stress triaxiality and initial defect volume fraction on the growth and coalescence of the defect.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.289-292
• /
• 2006

본 논문에서는 항공기용 터보 축 엔진의 결함진단 알고리즘으로 지지 벡터 장치(Support Vector Machine) 과 인공신경망(Artificial Neural Network) 을 복합으로 이용하였다. 인공신경망 알고리즘의 특성상 데이터 수에 따라 정확성과 수렴속도 등에서 차이가 나므로 탈설계 영역에서의 효용성여부를 판단하기 위해서 연료유량과 마하수에 따른 탈설계 영역 진단 결과를 지상정지 상태와 비교하였다.

• 정보처리학회논문지D
• /
• 제15D권3호
• /
• pp.313-320
• /
• 2008

전형적인 소프트웨어 생명주기 모델은 결점이 추가되거나 제거되는 단계들의 일련의 순서로 구성되어 있다. 우리가 원하는 수준의 품질을 달성하기 위해서는 소프트웨어 개발 전 과정에서 결점 제거를 수행하여야 한다. 잘 알려진 단계기반 결점 프로파일은 Gaffney 모델이 있다. 이 모델은 결점 제거 프로파일이 Rayleigh 분포를 따르며 단계 인덱스 번호를 모수로 하고 있다. 실제 개발되는 소프트웨어에 Gaffney 모델을 적용시 제거된 결점이 최대값이 되는 점을 위치 모수가 표현하지 못하는 문제가 있다. 그러므로 Gaffney 모델은 실제 결점 프로파일을 표현하지 못한다. 본 논문은 2개의 다른 모델을 제시한다. 하나는 수정된 Gaffney 모델로 위치 모수를 교체하기 위해 Putnam의 SLIM 모델의 모수를 도입하였다. 다른 하나는 누적 결점 프로파일이 S자 형태를 보여 성장곡선 모델을 제시하였다. 제안된 모델은 5개의 다른 소프트웨어 프로젝트로부터 얻어진 결점 프로파일 분석에 의해 검증하였다. 실험 결과 제안된 모델이 Gaffney 모델 보다 좋은 결과를 얻었다.

• 한국건설관리학회논문집
• /
• 제20권4호
• /
• pp.13-21
• /
• 2019

본 연구의 목적은 거주자가 하자정보를 정확하게 입력하고 건설회사와 정보를 공유 할 수 있는 하자정보 관리시스템에 대한 개선모델을 제시하는 것이다. 이를 위하여 기존의 하자정보 관리시스템을 고찰하고 거주자가 요구하는 기능을 적용하여 개선모델의 구조와 데이터 흐름 계통도를 제시하였다. 그리고 개선모델의 경제적 효과를 추정하였다. 상기와 같은 목적과 방법에 따라 도출된 결과는 다음과 같다. 빅 데이터와 연계하기 위한 하자정보 관리시스템의 정보입력화면에 대한 기본설계를 하였다. 또한 개선 모델을 활용함에 따라 유발되는 경제적 효과는 기존 방법 대비 약 151백만원이 절감되는 것으로 추정되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.853-856
• /
• 2002

Present. direct method x-ray conversion detector is studied by abroad medical instrument and country with amorphous Selenium. And we search the method for large area x-ray detector. Amorphous-Selenium based photoreceptor is widely used on the X-ray conversion materials. But amorphous-selenium based x-ray conversion detector is broken by high voltage and leakage defect point. In this paper, We investigated top-electrode distance rate to improve defect point and high voltage broken. The result to appoint to made large area x-ray conversion detector with base data.

• Corrosion Science and Technology
• /
• 제14권6호
• /
• pp.253-260
• /
• 2015

The pitting behaviours of 304L and 316L stainless steels were investigated at $3^{\circ}C$ to $90^{\circ}C$ in 1 M solutions of NaCl, NaBr and NaI by potentiodynamic polarization. The temperature dependences of the pitting potential varied according to the anion, being near linear in bromide but exponential in chloride. As a result, at low temperatures grades 304L and 316L steel are most susceptible to pitting by bromide ions, while at high temperatures both stainless steels were more susceptible to pitting by small chloride anions than the larger bromide and iodide. Thus, increasing temperature appears to favour attack by smaller anions. This paper will attempt to rationalise both of the above findings in terms of the point defect model. Initial findings are that qualitatively this approach can be reasonably successful, but not at the quantitative level, possibly due to insufficient data on the mechanical properties of thin passive films.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.278-279
• /
• 2017

Result from Amendment of Apartment Houses Decree Customer Service, Recently, the starting point of Defects Liability changed "Criteria of Completion date" to "Delivery date to Divided property". Through the Law amended, There are some inconsistency between "Claim for repairing defects" and "Period of security deposit for repairing defects claim". If someone bought a house after Completion date, Purchasing period of "Claim to security deposit for repairing defects" lapsed without renewal. This research is to identify problems and solutions for improving the system.

• Journal of Welding and Joining
• /
• 제19권3호
• /
• pp.267-273
• /
• 2001

In this study, welding phenomena involved in formation of penetrators during high frequency electric resistance welding were investigated. High speed cinematography of the process revealer that a molten bridge between neighboring skelp edges forms at apex point and travels along narrow gap toward to welding point at a speed ranging from 100 to 400 m/min. The bridge while moving along the narrow gap swept away oxide containing molten metal from the gap, providing oxide-free surface for a forge-welding at upsetting stand frequency of the budge formation, travel distance and speed of the bridge were affected by the heat input rate into strip. The travel distance and its standard deviation were found to have a strong relationship with the weld defect density. Based on the observation, a new mechanism of the penetrator formation during HF ERW process is proposed.