• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.669-675
• /
• 1997

This paper investigates the performances of GFRP bar and its possibility for using a substitute of steel bar. GFRO bar was made with introducing the glass fiber into GTR added UPE. We carried out the tensile test of GFRP and steel bar and out the three point bend test bond-test and fracture energy measurement on the GFRP bar and steel bar reinforced concrete. The GFRP bar was excellent as comparison with steel bar in the contribution to the energy absorption and the ductility of concrete. But its tensile, bond and bend strengthes were comparatively small. In order to improve these defects, we judged that glass fibers in GFRP bar must be completely adhesive one another by the impregnating glass fibers into UPE.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.126-131
• /
• 1999

Up until now, it is said that no satisfactory computer solutions have been found for synthesizing four-bar linkage based on the prescribed coupler link curve. In our study, an algorithm has been developed to improve the design synthesis of four-bar linkage automatically generating prescribed path by using B-spline interpolation. The suggested algorithm generates the desired coupler curve by using B-spline interpolation, and hence the generated curve approximates as closely as to the desired curve representing coupler link trajectory. Also, when comparing each generated polygon with the control polygon, rapid comparison by applying convex hull concept. finally, optimization process using ADS is incorporated into the algorithm based on the 5 precision point method to reduce the total optimization process time. As for examples, three different four-bar linkages were tested and the results showed the effectiveness of the algorithm.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.4
• /
• pp.53-63
• /
• 1986

In this study, the stress distribution of rectangular bar under torsion, when warping of both ends is free or constrained, is investigated. Method of separation of variable and Fourier Series are used for the theoretical analysis, and 3dimensional photoelastic stress-freezing method for experimental analysis. The main results are as follows; 1) In the case of warping-constrained rectangular bar, the normal stresses are negligible because they are less then 0.5% of the shear stresses. The maximum normal stress is placed on the point of y=0.61 b when b/a=1 and it gradually moves to the corner y=b when the value of b/a is increased. 2) According to increase of the value of b/a, on the crossection, the maximum shear stress is placed on the middle point of the long side (x=${\pm}a$, y=0) when warping of both ends is free but the middle of the short side (x=0, y=${\pm} b$) when warping is constrained. The stress distribution is straight line when warping is constrained, namely, the stress distribution is proportional to the distance from the axis of centroid, but parabolic when warping is free. 3) The values of the combined stress of warping-constrained bar, if the influence of the loaded point is neglected, are generally smaller than those of warping-free.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.37-40
• /
• 2009

This study was performed to design of $H_2O_2$/Kerosene catalyst ignition injector and cold flow test to measure the mass flow rate and spray angle. Mass flow rate and spray angle were measured by designed injector through cold flow test. Result of test kerosene mass flow rate was measured 12.88 g/s and 40 deg of spray angle at pressure drop 3 bar as same as design point. And hydrogen peroxide was measured 94.39 g/s at pressure drop 1 bar smaller than design point.

• Journal of the Korean Mathematical Society
• /
• v.33 no.2
• /
• pp.399-411
• /
• 1996

Let $\Omega$ be a smoothly bounded pseudoconvex domain in $C^n$ and let $A(\Omega)$ denote the functions holomorphic on $\Omega$ and continuous on $\bar{\Omega}$. A point $p \in b\Omega$ is a peak point if there is a function $f \in A(\Omega)$ such that $f(p) = 1, and $\mid$f(z)$\mid$ < 1 for z \in \bar{\Omega} - {p}$.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.424-429
• /
• 1998

Cloud-point data at $230^{\circ}C$ and 1,800 bar are presented for two poly(ethylene-co-vinyl alcohol)(PEVA) copolymers[9.9mol% and 17.8mol% vinyl alcohol(VA)] in ethylene, propane, propylene, n-butane, 1-butene, dimethyl ether(DME), and chlorodifluromethane(CDFM). The static type experimental apparatus with a view cell has been used for the experiment at the high pressure and temperature. The pressure-temperature (P-T) loops of PEVA(9.9mol% VA) copolymer-DME mixtures are presented at copolymer concentrations of 1.4wt% to 20.0wt%. Also, we presented the phase behavior of PEVA(17.8mol% VA) copolymer-DME system at copolymer concentration of 1.9wt% to 6.8wt%. The cloud-point curves for the PEVA copolymers in dimethyl ether showed single phase above 480 bar as a result of the hydrogen bonding between the vinyl alcohol unit and dimethyl ether. The pressure-concentration(P-x) isotherm loops of PEVA(9.9mol% and 17.8mol% VA)-DME system are obtained. The cloud-point curves for PEVA(9.9mol% and 17.8 mol% VA) copolymers andthe ethylene, propane, propylene, n-butane, 1-butene, and CDFM all show negative slopes of phase behavior and are located at pressures below 1,800 bar. For PEVA copolymer-DME system(9.9mol% VA), cloud-point curves show positive slopes that decrease in pressures with decrease in temperature in the temperature range of $80^{\circ}C$ to $160^{\circ}C$.

• Communications for Statistical Applications and Methods
• /
• v.10 no.3
• /
• pp.825-833
• /
• 2003

Knowing the time of the process change could lead to quicker identification of the responsible special cause and less process down time, and it could help to reduce the probability of incorrectly identifying the special cause. In this paper, we propose a maximum likelihood estimator of the process change point when a Shewhart $\bar{X}$ chart with variable sample size (VSS) scheme signals a change in the process mean. Also we build a confidence interval for the process change point by using the likelihood function.

• International Journal of Quality Innovation
• /
• v.4 no.1
• /
• pp.191-204
• /
• 2003

The target costing technique, mathematically discussed by Sauers, only uses the $C_p index along with Taguchi loss function and $\bar{X}$-P control charts to setup goal control limits. The new specification limits derived from Taguchi loss function is linked through the $C_p value to $\bar{X}$-P control charts to obtain goal control limits. Studies have shown that the point estimator of the $C_p index, $C_p, could vary from time to time due to the sampling error. The suggested approach is to use confidence intervals, especially the lower confidence intervals, to replace the point estimator. Therefore, an improvement on target costing technique is presented by applying the lower confidence interval of the $C_p index and using both Taguchi and Spiring's loss functions together with $\bar{X}$-P charts to make this technique more robust in practice. An example is also provided to illustrate how the improved target costing technique works.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1365-1373
• /
• 1994

Elasto-dynamic deformation of flexible linkage mechanism was analyzed using the finite element method. A computer program was constructed and applied to analyze a specific crank-level 4-bar mechanism, in which the elasto-dynamic deformation of the mechanism system was obtained using mode superposition method in the case of constant input speed and the effect of geometric stiffness on the mechanism is included. Experimental verification of numerical results was conducted by measuring the elasto-dynamic deformation of mid-points of coupler and lever for the 4-bar lingkage mechanism using high speed camera and image data processing systeem. For the elasto-dynamic deformation at the lever mid-point, the numerical results including geometric stiffness almost agree with the experimental ones. However, the numerical results excluding geometric stiffness good agree with the experimental ones at the couper mid-point.

• Journal of Technologic Dentistry
• /
• v.32 no.2
• /
• pp.57-63
• /
• 2010

Purpose : This study aimed to find out the effects of treatments on the surface of Zirconia. Methods : To this end, we selected six treatments that have been used widely: steam cleaning, 2bar & 6bar sand blasting, grinding by green stone point, grinding by diamond bur, and grinding by diamond bur with water spray. Results : The results of our study showed that monoclinic rate increased from all six treatments. Monoclinic rate varied by treatments, ranged from 0.6% (steam cleaning) to 6.5% (6bar sand blasting). These values from all six treatments were below ISO 13356 standard, which is 25%. Also, we found that two treatments (green stone point and diamond bur) increased roughness of surface of Zirconia. Conclusion : This study concluded that phase changes of Zirconia were not significant by using six treatments we employed.