A Study of Design of $H_2O_2$/Kerosene Ignition Injector and Spray Characteristics

과산화수소/케로신 점화용 분사기 설계 및 분무특성에 관한 연구

  • 김보연 (충남대학교 항공우주공학과) ;
  • 황오식 (충남대학교 항공우주공학과) ;
  • 이양석 (충남대학교 항공우주공학과) ;
  • 고영성 (충남대학교 항공우주공학과) ;
  • 김유 (충남대학교 기계공학과) ;
  • 김선진 (청양대학교 소방안전학과)
  • Published : 2009.05.14

Abstract

This study was performed to design of $H_2O_2$/Kerosene catalyst ignition injector and cold flow test to measure the mass flow rate and spray angle. Mass flow rate and spray angle were measured by designed injector through cold flow test. Result of test kerosene mass flow rate was measured 12.88 g/s and 40 deg of spray angle at pressure drop 3 bar as same as design point. And hydrogen peroxide was measured 94.39 g/s at pressure drop 1 bar smaller than design point.

본 연구에서는 케로신/과산화수소 점화용 분사기의 설계/제작하여 분무특성에 관한 연구를 수행하고자 하였으며, 이에 앞서 촉매점화방식으로 적용할 때 가장 적합한 분사기를 설계하고자 하였다. 설계/제작된 분사기를 수류시험을 통해 질량 유량 및 분산각을 측정하였다. 그 결과 케로신의 목표 질량유량(12.88 g/s)은 설계 차압과 같은 차압인 3 bar에서 측정되었으며, 이 때 분산각은 $40^{\circ}$을 확인하였다. 또한 과산화수소의 목표 질량 유량(94.39 g/s)은 설계 차압(3 bar) 보다 작은 1 bar에서 측정됨을 확인하였다.

Keywords