• Journal of the Korea Society for Simulation
• /
• v.12 no.2
• /
• pp.1-11
• /
• 2003

In this paper, we focus an optimal policy focus optimal class of (s, S) inventory control systems. To this end, we use the perturbation analysis and apply a stochastic optimization algorithm to minimize the average cost over a period. We obtain the gradients of objective function with respect to ordering amount S and reorder point s via a combined perturbation method. This method uses the infinitesimal perturbation analysis and the smoothed perturbation analysis alternatively according to occurrences of ordering event changes. Our simulation results indicate that the optimal estimates of s and S obtained from a stochastic optimization algorithm are quite accurate. We consider that this may be due to the estimated gradients of little noise from the regenerative system simulation, and their effect on search procedure when we apply the stochastic optimization algorithm. The directions for future study stemming from this research pertain to extension to the more general inventory system with regard to demand distribution, backlogging policy, lead time, and review period. Another directions involves the efficiency of stochastic optimization algorithm related to searching procedure for an improving point of (s, S).

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.123-132
• /
• 1987

In this paper, we studied on the design of elliptic digital filters using the bilinear z transformation method, and proposed a design procedure satisfying prescribed specifications. The magnitude characteristics of digital filters are compared with its of analog filiters by computer simulation. Finaly we considered the quantization effects of digital filters. In cascader realization of fixed-point digital filters under dynamic range constraints, the outpout noise for IIR digital filters depends on the pole-zero pairing and ordering of the second order sections. Therfore an optmization procedure to finding a good ordering and pairing is very desirable. Thus, we proposed a sub-optimization procedure for finding "near optimal" solution.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.39-43
• /
• 1998

Single crystals of{{{{ { Zn}_{ 1-x} {Mn }_{x }{Te} }}}} with x=0.3-0.6 were prepared by the standard Bridgeman method. Diffuse neutron diffraction intensities due to the short range magnetic ordering is found in the vicinities of 1 1/2 0 reciprocal point and its equivalent point, indicating that the magnetic correlation of the clusters is the type III antiferromangetic one do the F-type Bravais class crystals, being identical with that of {{{{{ Cd}_{ 1-x} {Mn }_{x }Te }}}}. Neutron inelastic scattering measure-ment has been performed for {{{{{ Zn}_{ 0.6} { Mn}_{ 0.4}Te }}}} sample using the cold neutron spectrometer. AGNES. High resolution measurement with the energy resolution of {{{{ TRIANGLE E= +- .01meV}}}} was carried out in the temperature range from 10K to the ambient. Critical scattering, closely related with the spin glass transition, has been observed for the first time in this semimagnetic semi-conductor. The critical scattering is observed at temperatures in the vicinity of the spin glass transition temperature, 17K. The scattering is observed as a kind of quasielastic scattering in the reciprocal range where the elastic magnetic diffuse scattering has been observed, e.g., 11/20 reciprocal point, indicating the spin fluctuation has dynamic components in this material. Photoconductivity has been discovered below 150K in {{{{{ Zn}_{ 0.4} {Mn }_{0.6 } Te}}}}. The electric AC conductivity has been increased dramatically under the laser light with the wave lengths of {{{{ lambda =6328,5145 and4880 }}}}$\AA$ ,respectively. After the light was darkened, the conductivity was reduced to the original level after about 2000 seconds at 50K, being above the spin glass transition temperature. This phenomenon is the typical persistent photoconductivity; PPC which was similarly found in {{{{ { Zn}_{ 1-x} { Mn}_{x} Te}}}}.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.4
• /
• pp.350-359
• /
• 2013

In this paper, Inter user interference elimination algorithm based on Block Diagonal Geometric Mean Decomposition(BD-GMD) for eliminating inter user interference apply to Zero-Forcing in the Successive Signal to Leakage plus Noise Ratio(SSLNR) in Coordinated Multi-Point Coordinated Beamforming system(CoMP CB). As a result, the leakage power is eliminated. The inter user interference elimination algorithm, however, cannot guarantee the enough desired signal power therefore we perform the channel ordering to overcome this disadvantage and increase the desired signal power. The simulation results show that the proposed scheme provides the improved Bit Error Rate(BER) performance compared with existing SSLNR-Zero-Forcing-Tomlinson Harashima precoding(SSLNR-ZF-THP).

• Journal of applied mathematics & informatics
• /
• v.27 no.3_4
• /
• pp.475-487
• /
• 2009

This paper studies the iteration method of solving a type of second-order three-point boundary value problem with non-linear term f, which depends on the first order derivative. By using the upper and lower method, we obtain the sufficient conditions of the existence and uniqueness of solutions. Furthermore, the monotone iterative sequences generated by the method contribute to the minimum solution and the maximum solution. And the error estimate formula is also given under the condition of unique solution. We apply the solving process to a special boundary value problem, and the result is interesting.

• ETRI Journal
• /
• v.5 no.3
• /
• pp.16-25
• /
• 1983

Increasing importance is being attached to the idea of measuring software characteristics. This paper deals with following things. First, a relation of program and flow graph is discussed. It describes a theoretic complexity measure and illustrates how it can be used to manage and control program complexity. Second, cyclomatic complexity measure is discussed. The complexity is independent of physical size and depends only on the decision structure of a program. Third, consider a knot which defines crossing point and provide the ordering of the nodes to make the transition from a two dimensional graph to a one dimensional program. A program modules that can improve FORTRAN IV program text is tested by knot counting and its control complexity is improved.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.135-141
• /
• 2015

At the end of 2014, ordering organizations, 25 general contractors and 80 specialty contractors were certified by the KOSHA 18001 for the establishment of safety & health management system. However, safety management departments in the certified companies have been disrupted due to the financial difficulty and CEO's indifference, which has resulted in the cancellation of more than 30% of the certifications. Furthermore, the KOSHA 18001 due to the shortage of internal evaluators in KOSHA and the increase of applications for new certification & the extension of the certification is placed in a difficult situation in the near future. Therefore, it is necessary to enhance the KOSHA 18001 by solutions such as introducing outside evaluators, which is the key point of this study. This study was performed through the questionnaire survey & the interviews with the construction companies, ordering organization and KOSHA 18001 specialists The content is centered on the introduction of external evaluators. As a result, the introduction of external evaluators is necessary through amending certification regulation because only internal evaluators cannot afford to process all the new application and the extension of existing certifications.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.324-329
• /
• 2015

First-principles investigations on the hybrid one dementional hexagonal hybrboron-nitride nano ribbons (BNNRs) with a armchair graphene nano-ribbons(AGRNRs), are presented. Electronics properties of the mixed armchair BNC nano-ribbon (BNCNRs) structure show control of a band gap on all cases at the special K-point. And we have studied, the band gap is direct in all cases. The band gap of mixed ABNCNRs could be divided into three groups (${\Delta}3p$, ${\Delta}3p+1$ and ${\Delta}3p+2$) and decrease with the increase of the width. Also these results show similar to the AGNRs case. Different from the band gap value ordering of AGNRs (${\Delta}3p+1$ > ${\Delta}3p$ > ${\Delta}3p+2$), the ordering of ABNCNRs is ${\Delta}3p$ > ${\Delta}3p+1$ > ${\Delta}3p+2$. The discrepancy may come from the differences between the edges of AGRNRs and the boundaries of hybrid BNCNRs. In addition, the bandgap of ABNCNRs are much smaller than those of the corresponding AGNRs. Our results show that the origin of band gap for BNCNRs with armchair shaped edges arises from both quantum confinement effect of the edges. These results similar to thecase of AGNRs. These properties of hybrid BN/C nano-ribbon structure may offer suitable bandgap to develop nnanoscale electronics and solar cell beyond individual GNRs and BNNRs.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.423-432
• /
• 2014

Non-dominated Sorting Genetic Algorithm-II (NSGA-II) is applied for solving Combined Economic Emission Dispatch (CEED) problem with valve-point loading of thermal generators. This CEED problem with valve-point loading is a nonlinear, constrained multi-objective optimization problem, with power balance and generator capacity constraints. The valve-point loading introduce ripples in the input-output characteristics of generating units and make the CEED problem as a nonsmooth optimization problem. To validate its effectiveness of NSGA-II, two benchmark test systems, IEEE 30-bus and IEEE 118-bus systems are considered. To compare the Pareto-front obtained using NSGA-II, reference Pareto-front is generated using multiple runs of Real Coded Genetic Algorithm (RCGA) with weighted sum of objectives. Comparison with other optimization techniques showed the superiority of the NSGA-II approach and confirmed its potential for solving the CEED problem. Numerical results show that NSGA-II algorithm can provide Pareto-front in a single run with good diversity and convergence. An approach based on Technique for Ordering Preferences by Similarity to Ideal Solution (TOPSIS) is applied on non-dominated solutions obtained to determine Best Compromise Solution (BCS).

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1503-1506
• /
• 1987

This paper proposes the self test method for 16 point FFT processor with systolic array architecture. To test efficiently and solve the increased hardware problems due to built-in self test, we change the normal registers into Linear Feedback Shift Registers(LFSR). LFSR can be served as a test pattern generator or a signature analyzer during self test operation, while LFSR a ordering register or a accumulator during normal operation. From the results of logic simulation for 16 point FFT processor by YSLOG, the total time is estimated in about. 21.4 [us].