• Steel and Composite Structures
• /
• 제32권5호
• /
• pp.595-610
• /
• 2019

This paper deals with the static and dynamic behavior of Functionally Graded Carbon Nanotubes (FG-CNT)-reinforced porous sandwich (PMPV) polymer plate. The model of nanocomposite plate is investigated within the first order shear deformation theory (FSDT). Two types of porous sandwich plates are supposed (sandwich with face sheets reinforced / homogeneous core and sandwich with homogeneous face sheets / reinforced core). Functionally graded Carbon Nanotubes (FG-CNT) and uniformly Carbon Nanotubes (UD-CNT) distributions of face sheets or core porous plates with uniaxially aligned single-walled carbon nanotubes are considered. The governing equations are derived by using Hamilton's principle. The solution for bending and vibration of such type's porous plates are obtained. The detailed mathematical derivations are provided and the solutions are compared to some cases in the literature. The effect of the several parameters of reinforced sandwich porous plates such as aspect ratios, volume fraction, types of reinforcement, number of modes and thickness of plate on the bending and vibration analyses are studied and discussed. On the question of porosity, this study found that there is a great influence of their variation on the static and vibration of porous sandwich plate.

• Advances in concrete construction
• /
• 제15권2호
• /
• pp.115-126
• /
• 2023

This paper investigates creep analysis of a plate made of Al-SiC functionally graded material using Mendelson's method of successive elastic solution. All mechanical and thermal material properties, except Poisson's ratio, are assumed to be variable along the thickness direction based on the volume fraction of reinforcement and thickness. First, the basic relations of the plate are derived using the Love-Kirchhoff plate theory. The solution of governing equations yields an elastic solution to start creep analysis. The creep behavior is demonstrated through Norton's equation based on Pandey's experimental results extracted for Al-SiC functionally graded material. A linear variation is assumed for temperature distribution along the thickness direction. The creep strain, as well as the thermal strain, are included in the governing equations derived from classical plate theory for mechanical strain. A successive elastic solution based on Mendelson's method is employed to derive the history of stresses, strains, and displacements over a long time. History of stresses and deformations are obtained over a long time to predict damage to the plate because of various loadings, and material composition along the thickness and planar directions.

• Steel and Composite Structures
• /
• 제21권2호
• /
• pp.343-356
• /
• 2016

As the common cast-in-place construction works fails to meet the enormous construction demand under rapid economic growth, the development of prefabricated structure instead becomes increasingly promising in China. For the prefabricated structure, its load carrying connection joint play a key role in maintaining the structural integrity. Therefore, a novel end plate bolt connecting joint between fully prefabricated pre-stressed concrete beam and high-strength reinforcement-confined concrete column was proposed. Under action of low cycle repeated horizontal loadings, comparative tests are conducted on 6 prefabricated pre-stressed intermediate joint specimens and 1 cast-in-place joint specimen to obtain the specimen failure modes, hysteresis curves, skeleton curves, ductility factor, stiffness degradation and energy dissipation capacity and other seismic indicators, and the seismic characteristics of the new-type prefabricated beam-column connecting joint are determined. The test results show that all the specimens for end plate bolt connecting joint between fully prefabricated pre-stressed concrete beam and high-strength reinforcement-confined concrete column have realized the design objectives of strong column weak beam. The hysteretic curves for specimens are good, indicating desirable ductility and energy dissipation capacity and seismic performances, and the research results provide theoretical basis and technical support for the promotion and application of prefabricated assembly frames in the earthquake zone.

• 한국전산구조공학회논문집
• /
• 제28권3호
• /
• pp.259-266
• /
• 2015

본 논문에서는 유공형 강판의 횡방향 보강간격에 따른 넓은 보의 전단성능을 실험적으로 평가하기 위하여 횡방향 전단보강 간격과 넓은 보의 유효깊이를 변수로 고려하였다. 시험체는 총 8개로 유공형 강판으로 전단보강한 시험체가 5개, 무보강 시험체가 3개이다. 균열 및 파괴유형, 변형률과 하중-변위 곡선을 분석하였다. 유공형 전단보강재의 전단강도 기여분을 분석하고, 횡방향 전단보강의 최대간격을 제안하였다. 횡방향 전단보강 개수가 2개인 시험체에 비해 3개인 시험체에서 전단강도가 크게 나타났으며 유효깊이가 증가할수록 전단강도가 크게 나타났다.

• 한국환경복원기술학회지
• /
• 제18권6호
• /
• pp.51-60
• /
• 2015

This study conducted shear strength test and plate bearing test to look into the characteristics of bearing capacity using geosynthetics case on forest road surface. The shear strength test showed that the internal friction angle at the time when geosynthetics was used was measured larger on average than that in the unreinforced case. Therefore, using geosynthetics case produced more bearing capacity reinforcement effect. The result from the comparison test of internal friction angle by geosynthetics type revealed that the internal friction angle at the time when geotextile case was used was measured larger. That was attributable to the difference between the area of the total cross section of geotextile made in type of non-woven fabric and its material. Plate bearing test showed that the settlement at the time when geosynthetics was used was measured smaller than that in the unreinforced case. Therefore, using geosynthetics produced more bearing power reinforcement effect. The result from the comparison test showed that geogrid case was measured smaller than geotextile case. Henceforth, It is seemed that it will be necessary to keep studying the reinforcement engineering and process of forest road surface which fits the characteristics and conditions of geosynthetics to prevent forest road demage.

• 한국지반환경공학회 논문집
• /
• 제9권6호
• /
• pp.5-12
• /
• 2008

본 연구에서는 타이어셀로 보강된 모래지반에 대한 평판재하시험을 유한요소법에 의해 모델링하였다. 타이어셀의 기능과 외양은 지오셀과 비슷하며 지오셀과 마찬가지로 토목구조물에서 지반보강 목적으로 사용할 수 있다. 해석결과는 모델링의 적절성을 평가하기 위해 현장 재하시험결과와 비교하였다. 두 결과의 비교로부터 유한요소해석에 의한 침하량은 극한지지력에서 실험결과와 유사한 값을 나타내었다. 모델링을 검증한 후 타이어셀의 보강깊이와 보강층 수의 변화에 대한 해석을 수행하였다. 보강효과는 보강깊이가 증가함에 따라 감소하였으며 이러한 경향은 기존의 시험결과와 유사하였다. 보강층수가 증가함에 따라 보강효과는 증가하였다. 그러나 2층 이상의 보강은 효과가 무시할 정도였다. 결론적으로 본 연구에서의 모델링 방법은 타이어셀을 사용한 지반구조물의 해석에 사용할 수 있을 것으로 생각된다.

• 한국강구조학회 논문집
• /
• 제12권1호통권44호
• /
• pp.17-28
• /
• 2000

현재 현장에서 건설되어지는 콘크리트교량의 바닥판은 상부와 하부에 동일한 철근을 배근한다. 바닥판 상부철근의 부분적인 제거는 구조적인 측면에서 볼 때, 안전성을 위협하지 않는다는 경험적인 연구 결과들이 발표되어왔다. 판이론에 근거하여 강판형교의 3거더와 4거더시 바닥판의 구조적인 거동을 수식적으로 표현하는 간략화 된 방법을 유도하였다. 거더간 상대처짐을 고려한 간략화 된 방법은 유한요소해석의 결과치와 유사한 값을 얻을 수 있었다. 본 연구에서는, 바닥판 슬래브의 새로운 설계개념이 간략화 된 방법을 통해서 제안되었다. 간략화 된 방법의 변수는 하중위치, 형상비, 상대강성비 그리고 지간 길이 등을 선정하였다. 이 새로운 설계접근방법은 바닥판 상부 철근량을 감소시켜줄 것이다. 바닥판 상부 철근량의 감소는 건설비용의 감소와 철근의 부식문제를 최소화 시켜줄 수 있을 것이다.

• 한국전산구조공학회논문집
• /
• 제29권3호
• /
• pp.269-275
• /
• 2016

본 논문은 유공형 판 형태로 전단 보강한 넓은 보의 중심에 기둥을 삽입하여 연속한 두 경간으로 설계하여 전단파괴 실험을 통해 넓은 보의 거동을 평가하였다. 유공형 강판으로 전단 보강된 시험체 5개와 유공형 GFRP판으로 보강된 시험체 3개 총 8개의 시험체를 전단파괴 실험을 통해 계측한 전단강도와 ACI-318 규준의 설계식을 통해 얻은 전단강도와 비교 평가하였다. 또한 넓은 보의 지지부 폭, 지지부의 형상과 전단보강재의 재료를 변수로 하여 넓은 보의 전단강도에 미치는 영향을 분석하였다. 이를 통해 지지부 폭이 증가할수록 전단강도가 증가하고 하중의 집중을 방지하는 것을 확인하였다. 또한 전단보강재의 재료인 강재와 GFRP에 상관없이 전단보강량이 동일하다면 넓은 보에서 비슷한 전단보강효과를 보이는 것을 확인하였다.

• 한국해양공학회지
• /
• 제28권1호
• /
• pp.20-27
• /
• 2014

In view of the importance of material reduction and rational structural design due to the rapid increase in oil and steel prices, an optimized structural hybrid design system for the doubler plate of a ship's hull structure was developed. A direct design process by a structural designer was added to this developed optimized system to increase the design efficiency and provide a way of directly inserting a designer's decisions into the design system process. As the first step of the doubler design system development, the design formulas used in doubler design system were introduced. Based on the introduction of influence coefficients $K_{t_c}$ $K_{t_d}$, $K_{b_d}$ and $K_{a_d}$ according to the variations in the doubler length, breadth, doubler thickness, and average corrosion thickness of the main plate, the design formulas for an equivalent plate thickness were developed, and a hybrid design system using these formulas was suggested for the slender doubler plate of a ship structure subjected to a longitudinal in-plane compression load. By using this developed design system, a more rational doubler plate design can be expected considering the efficient reinforcement of the plate members of ship structures. Additionally, a more detailed structural analysis through local strength evaluations will be performed to verify the efficiency of the optimum structural design for the doubler plate.

• Journal of the Korean Wood Science and Technology
• /
• 제42권5호
• /
• pp.571-578
• /
• 2014

As a way of developing wooden joint development, a glass fiber reinforced wood plate was manufactured to replace a steel plate. Also, the fracture toughness was evaluated. Through application to a cantilever-type specimen made of a column and a beam, the moment resistance performance was evaluated. For the fracture toughness specimen of the wood plate, 12 types were manufactured by varying the combination of a main member (veneer and plywood) and reinforcement (glass fiber sheet and glass fiber cloth). The results of the fracture toughness test indicated that the 5% yield load of the specimen using plywood was 18% higher than that of the specimen using veneer, and that the specimen reinforced by inserting glass fiber sheets between testing materials (Type-3-PS) had the highest average 5% yield load 4841 N. Thus, a moment resistance strength test was performed by applying Type-3-PS to a column-beam joint. The results of the test indicated that compared to the specimen using a steel plate and a drift pin (Type-A), the maximum moment ratio of the specimen using a glass fiber reinforced wood plate (Type-3-PS) and a drift pin (Type-B) was 0.79; and that a rupture occurred in the wood plate due to high stiffness of the drift pin. The maximum moment ratio of the specimen using a glass fiber reinforced wood plate (Type-3-PS) and a glass fiber reinforced wooden laminated pin (Type-C) was 0.67, which showed low performance. However, unlike Type-A, a ductile fracture occurred on Type-C, and the load gradually decreased even after the maximum moment.