Browse > Article
http://dx.doi.org/10.12989/scs.2016.21.2.343

Study on seismic performance of connection joint between prefabricated prestressed concrete beams and high strength reinforcement-confined concrete columns  

Jiang, Haotian (School of Civil Engineering, Xian University of Architecture and Technology)
Li, Qingning (School of Civil Engineering, Xian University of Architecture and Technology)
Jiang, Weishan (School of Civil Engineering, Xian University of Architecture and Technology)
Zhang, De-Yi (Department of Engineering Mechanics, Ontario Power Generation)
Publication Information
Steel and Composite Structures / v.21, no.2, 2016 , pp. 343-356 More about this Journal
Abstract
As the common cast-in-place construction works fails to meet the enormous construction demand under rapid economic growth, the development of prefabricated structure instead becomes increasingly promising in China. For the prefabricated structure, its load carrying connection joint play a key role in maintaining the structural integrity. Therefore, a novel end plate bolt connecting joint between fully prefabricated pre-stressed concrete beam and high-strength reinforcement-confined concrete column was proposed. Under action of low cycle repeated horizontal loadings, comparative tests are conducted on 6 prefabricated pre-stressed intermediate joint specimens and 1 cast-in-place joint specimen to obtain the specimen failure modes, hysteresis curves, skeleton curves, ductility factor, stiffness degradation and energy dissipation capacity and other seismic indicators, and the seismic characteristics of the new-type prefabricated beam-column connecting joint are determined. The test results show that all the specimens for end plate bolt connecting joint between fully prefabricated pre-stressed concrete beam and high-strength reinforcement-confined concrete column have realized the design objectives of strong column weak beam. The hysteretic curves for specimens are good, indicating desirable ductility and energy dissipation capacity and seismic performances, and the research results provide theoretical basis and technical support for the promotion and application of prefabricated assembly frames in the earthquake zone.
Keywords
pre-stressed structure; beam-column joint; low cycle loading; shear resistance of joint; ductility factor;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 AISC (2005), Seismic provision for structural steel building, American Institute of Steel Structure.
2 Ban, S.L. (2011), "Experimental studies on dimensional effect on characteristics of stirrups confined concrete", Dalian University of Technology, Dalian, China.
3 Fu, J.F. (2011), "Experimental studies on stress characteristics of construction waste recycled aggregate concrete and component", Zhengzhou University, Zhengzhou, China.
4 GB 2010 (2010), Code for Design of Concrete Structures.
5 Ho, I.F.Y., Lam, E.S.S., Wu, B. and Wang, Y.Y. (2013), "Monotonic behavior of reinforced concrete columns confined with high-performance ferrocement", J. Struct. Eng. - ASCE, 139(4), 574-583.   DOI
6 Hossain, M.R. and Ashraf, M. (2012), "Mathematical modelling of yielding shear panel device", Thin-Wall. Struct., 59, 153-161.   DOI
7 Hossain, M.R., Ashraf, M. and Albermani, F. (2011), "Numerical modelling of yielding shearpanel device for passive energy dissipation", Thin-Wall. Struct., 49(8), 1032-1044.   DOI
8 Hou, W.L. (2011), "Performance test and theoretical study on joint between square pipe concrete specialshaped column and steel beams", Xi'an University of Architecture and Technology, Xi'an, China.
9 Jian, B., Zhong, Q., Gan, Y. and Wang, Y.P. (2013), "Experimental studies on low-frequency cyclic load on transfer structure for prestressed concrete empty web truss", China Civil Eng. J., 46(12), 18-24.
10 Karayannis, C.G. and Sirkelis, G.M. (2008), "Strengthening and rehabilitation of RC beam-column joints using carbon-FRP jacketing and epoxy resin injection", Earthq. Eng. Struct. D, 37(5), 769-790.   DOI
11 Le-Trung, K., Lee, K., Lee, J., Lee, D.H. and Woo, S. (2010), "Experimental study of RC beam-column joints strengthened using CFRP composites", Compos. Part B - Eng., 41(1), 76-85.   DOI
12 Li, B. and Kai, Q. (2011), "Seismic behavior of reinforced concrete interior beam-wide columnjoints repaired using FRP", J. Compos. Constr., 15(3), 327-338.   DOI
13 Liang, X.W., Xin, L., Deng, M.K., Fang, L. and Zhang, X.H. (2010), "Experimental studies on seismic behavior and performance indicators of high-strength concrete shear wall", China Civil Eng. J., 11, 37-45.
14 Liu, L. (2011), "Eberimental study on uni-axial compression constitutive relation of corroded stirrup confined concrete", Xi'an University of Architecture and Technology, Xi'an, China.
15 Liu, Z.Q., Xue, J.Y., Ni, M.M., Zhao, P. and Zhao, H.T. (2012), "Quasi-static test and finite element force analysis on solid web shaped reinforced concrete columns side frame", J. Build. Struct., 33(8), 23-30.
16 Ma, G.Y. and Su, Y.P. (2010), "Calculation formulas for ultimate compressive strength and strain of FRP confined concrete cylinder", J. Hebei Univ. Sci. Technol. (Natural Science Edition), 1, 74-77.
17 Mu, X.T., Jian, S.F. and Jian, G.N. (2013), "Seismic behavior of steel reinforced concrete column-steel truss beam hybrid joints", 56, 1557-1569.   DOI
18 Pantelides, C.P., Okahashi, Y. and Reaveley, L.D. (2008), "Seismic rehabilitation of reinforced concrete frame interior beam-column joints with FRP composites", J. Compos. Constr., 12(4), 435-445.   DOI
19 Niroomandi, A., Maheri, A., Maheri, M.R. and Mahini, S.S. (2010), "Seismic performance of ordinary RC frames retrofitted at joints by FRP sheets", Eng. Struct., 32(8), 2326-2336.   DOI
20 Panda, K.C., Bhattacharyya, S.K. and Barai, S.V. (2012), "Shear behaviour of RC T-Beams strengthened with U-wrapped GFRP sheet", Steel Compos. Struct., Int. J., 12(2), 149-166.   DOI
21 Rao, G.A. and Sundaresan, R. (2012), "Evaluation of size effect on shear strength of reinforced concrete deep beams using refined strut-and-tie model", Sadhana, 37(1), 89-105.   DOI
22 Sasmal, S., Novak, B., Rmanjaneyulu, K., Roehm, C., Srinivas, V. and Lakshmanan, N. (2011), "Upgradation of gravity load designed sub-assemblages subjected to seismic type loading", Compos. Struct., 93(6), 1561-1573.   DOI
23 Shayanfar, M.A., Barkhordari, M.A. and Rezaeian, A.R. (2012), "Experimental study of cyclic behavior of composite vertical shear link in eccentrically braced frames", Steel Compos. Struct., Int. J., 12(1), 13-29.   DOI
24 Shi, Q.X., Wang, N., Tian, Y., Wang, P. and Li, K. (2013), "Studies on axial compression stress - strain full curve for high-strength stirrups confined high-strength concrete", J. Build. Struct., 34(4), 144-151.
25 Tsonos, A.G. (2008), "Effectiveness of CFRP-jackets and RC-jackets in post-earthquake and pre-earthquake retrofitting of beam-column subassemblages", Eng. Struct., 30(3), 777-793.   DOI
26 Zhang, Z.C. (2013), "Studies on seismic behavior of concrete columns confined by plate bolt tendon connected high strength stirrups", Xi'an University of Architecture and Technology, Xi'an, China.
27 Xu, M., Peng, Z. and Chen, Z.F. (2013), "Experimental study on seismic behavior of load-bearing walls with insulation concrete compound block masonry of new-type concrete", Industrial Construction Magazine Agency, 43(3).
28 Yao, R. (2010), "Studies on seismic behaviors of precast prestressed fabricated beam-column joints", Beijing University of Civil Engineering and Architecture, Beijing, China.
29 Zenunovic, D. and Folic, R. (2012), "Models for behaviour analysis of monolithic wall and precast or monolithic floor slab connections", Eng. Struct., 40, 466-478.   DOI
30 Zhang, Q., Jiang, Q. and Lu, X.Z. (2013), "Studies on influences of lateral impact on compressive bearing capacities of steel pipe concrete", Struct. Eng., 29(3), 59-64.
31 Zhao, B.C, Zhu, H., He, R.Q. and Gu, Q. (2012), "Experimental study on through-bolt-end-plate connecting joint between steel pipe concrete columns and trusses", Xi'an University of Architecture and Technology (Natural Science Edition), 44(2), 170-176.