• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.4
• /
• pp.49-56
• /
• 2002

For the purpose of the increase in the performance and thermal stability of PBX's, the mixed formal consisting of BDNPF, DNPBF and BDNBF were synthesized. In order to find out the optimal condition for the synthesis of energetic plasticizer, BDNPF, DNPBF and BDNBF, the synthetic procedures have been investigated. We synthesized DNP-OH and DNB-OH through oxidative nitration and controlled various composition of mixed formal by $H_{2}SO_{4}$ and s-trioxane to investigate optimal composition, and then characterized its thermo-physical properties.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.497-500
• /
• 1997

Conducting polymer is new material in lithium secondary battery. conducting polymer has a lot of merit which is flexible and good handing so that this material is used battery system, solid polymer electrolytes airs used PEO(Polyethylene oxide) and PEO/PMMA branding material adding by liquid plasticizer or lithium salt polymer electrolyte which is added liquid plasticizer, lithium salt decreased the crystallity and thermal stability is over than 13$0^{\circ}C$. it is very useful tn apply lithium secondary battery system.

• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.459-463
• /
• 2009

In this study, physical properties of poly(vinyl acetate-co-ethylene) (VAE) emulsion were investigated by adding different amounts of di-butyl phthalate (DBP) which is a common plasticizer of VAE. The glass transition temperature $(T_g)$ of the dried plasticized VAE emulsion film, which measured by Differential Scanning Calorimeter, was decreased with increasing the DBP contents while the viscosity of the plasticized VAE emulsion was increased with the DBP contents. These results suggest that the plasticizer in the dried VAE film can prevent the strong interaction between chains, resulted by the decrease of $T_g$. In the emulsion, however, the particle sizes were swelled by the penetration of plasticizers and then its viscosity increased with the DBP content. When the DBP was added, the mechanical properties of the plasticized VAE films, such as tensile strength, elongation and creep resistance, were decreased while the water resistance was increased.

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.210-214
• /
• 2010

The structural development of triacetyl cellulose (TAC) was studied as a function of solution casting processing parameters such as dope concentration, evaporation temperature, annealing temperature and the addition of plasticizer. The crystalline structure was developed by the solution casting and the level of crystallinity was increased with increasing dope concentration and evaporation temperature. The crystalline structure could be enhanced by the annealing process after formation of TAC film. Introducing plasticizer resulted in decreasing melting temperature and crytallinity of TAC film due to the increase of chain mobility. It was also found that thermal stability of TAC was improved due to the rigid structure of applied plasticizer.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.6
• /
• pp.32-38
• /
• 2017

Plasticizers play roles in increasing plasticity or fluidity during mixing. Representative plasticizers are DOS, DOA, IDP and BTTN. In particular, BTTN is an energy plasticizer that helps propellant performance and is widely used. However these compounds are sensitive relatively. So, in order to develop insensitive energetic plasticizer, synthesis of one of the derivatives of triazole, 4,5-bis (azido methyl)-(1-butyl)-1,2,3-triazole (1-DABTR), was studied. Also, the compound was characterized by NMR, IR spectroscopy, and physicochemical properties such as glass transition temperature, melting point, decomposition temperature, density, viscosity and impact sensitivity were measured. In addition, the heats of formation (${\Delta}H_f$) of 1-DABTR was also calculated using Gaussian 09.

• Analytical Science and Technology
• /
• v.21 no.2
• /
• pp.135-142
• /
• 2008

Plasticizer and heavy metals in domestic PVC wallpaper manufactured in Korea after 2005 were analyzed to identify the contained quantity in comparison with the 2002 manufactured PVC wallpapers. Plasticizer of wallpapers was analyzed by the method KSM1991 which uses soxhlet extraction with n-hexane and GC/FID. Heavy metals were pre-treated with 0.07 mol/L hydrochloric acid (HCl) and analyzed by ICP/OES according to the EN 71-part 3 method. DEHP, DINP, DEP, acetyl tributyl citrate were identified from wallpaper. Contents of DEHP, DINP were 0.2~11.3%, 17.9~27.8% respectively in 6 wallpapers, DEP and acetyl tributyl citrate were 1.5%, 8.9% respectively in one wallpaper. Plasticizers have changed from DEHP that has possibility of hazards to DINP, DEP and acetyl tributyl citrate as compared with 2002. Heavy metals were detected under guide line from all of the wallpapers except fire-retardant wallpaper contain antimony. While PVC wallpaper was improved by use of various plasticizer, functional wallpapers such as fire-resistant wallpaper contain high antimony in this study.

• Preventive Nutrition and Food Science
• /
• v.10 no.1
• /
• pp.88-91
• /
• 2005

To improve the physical properties of protein films, various plasticizers and cross-linking agents were used in the preparation of the films. For zein film, 3% polypropylene glycol with 3% glycerol was the best plasticizer, while 2.5% glycerol was the most suitable for soy protein isolate (SPI) film in terms of tensile strength (TS), % elongation, and water vapor permeability (WVP). Formaldehyde, glutaraldehyde, glyoxal, and cinnamaldehyde as cross-linking agents of protein films were used to further improve the physical properties of the films. All aldehydes used as cross-linking agent in this study improved TS of zein and SPI films. In particular, cinnamaldehyde was the best cross-linking agent due to its safety in foods. These results suggest that appropriate use of plasticizer and cross-linking agent like cinnamaldehyde should improve the physical properties of protein films for use in food packaging.

• Journal of Korean Society for Atmospheric Environment
• /
• v.1 no.1
• /
• pp.99-107
• /
• 1985

A coated wire ion selective electrode for nitrate (nitrate-CWE_ was constructed using epoxy resin, ion exchanger and plasticizer as a polymer membrane. It's stility, the composition of a polymer membrane, the response characteristics, the selectivity were examined and applied to the environmental analysis. The nitrate-CWE was prepared using a copper wire, wihch was coated with epoxy resin being incorporated with the nitrate ion exchanger and plasticizer. The best composition of the polymer membrane for the nitrate-CWE was obtained by mixing epoxy resin, ion exchanger and plasticizer in the ratio of 2:1:0.4. The potential (56.3$\pm$0.5 mV) of stick form nitrate-CWE in this composition was close to that (59.2 mV) of Nernstian response. The detection limit for nitrate ion were found to the about $6 \times 10^{-5}M$ and the useful pH was 2.5 $\sim$ 10.3. Furthermore, the selectivity of iodide and perchrorate for the nitrage-CWE was also much improved compared with that for a liquid membrane nitrate electrode. The nitrate-CWE was used to determind $NO_x$ in stack gas. The results were in good agreement with those obtained either by electrode method or by the improved NEDA method within a relative error of 4.0%.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.9-12
• /
• 2005

Molecular characteristics and rheological properties of cellulose acetate butyrate (CAB), cellulose acetate propionate (CAP) and nitrocellulose (GC-519) which are being widely used as propellants were investigated. Their weight-average molecular weight (Mw) and number-average molecular weight (Mn) were estimated via Gel Permeartion Chromatograpy (GPC). Cellulose derivatices were mixed with di-n-propyl adipate (DNPA) which acted as plasticizer in acetone, and then rheological properties of the mixture of cellulose derivatives and this plasticizer in acetone were investigated at $0^{\circ}C$ by rheometer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.556-560
• /
• 2002

The rheological characteristics of PNN-PZT ceramics with high electromechanical coupling factor and electricstrictive constant was investigated. Green sheets of piezoelectric PNN-PZT ceramics were made by tape-casting method with controlling the mixing ratio of a dispersant, an organic binder, and a plasticizer. When the dispersant content was 1 wt.%, the slurry showed the best rheological characteristics for tape casting. The amounts of the plasticizer and the binder was simultaneously varied in the ranges of 1.5~18 and 3~9 wt.%, respectively. When both the plasticizer and binder of 6 wt.% mixed in the solution, respectiveley, the highest green density of the sheet was obtained without macrodefects. Multilyered structures of PNN-PZT/Ag-Pd were successfully fabricated using the optimized tape casting condition. The polarization behavior of these actuators seemed to similar to typical electricstrictive polarization behavior. The multilayer ceramic actuator is about $0.6{\times}10^{-3}$ of strain.