• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.374-381
• /
• 2001

Surface roughness plays a significant role in friction, wear, and lubrication in machine components. Most engineering surfaces have tile nogaussian height distrubution. So, in this study, elastic-plastic contact simulations are conducted for not only gaussian surfaces but also nongaussian surfaces. Nongaussian rough surface considering the kurtosis is generated numerically. The contact simulation model takes into account the plastic deformation behaviors of asperities by setting a celing on their contact pressure at material hardness value. It will be shown that the performace variables such as real contact area fraction, plastic area fraction and average gap are sensitive to the characteristics of surface geometry according to kurtosis.

• Archives of Plastic Surgery
• /
• 제39권5호
• /
• pp.534-539
• /
• 2012

Background Autologous fat grafting evolved over the twentieth century to become a quick, safe, and reliable method for restoring volume. However, autologous fat grafts have some problems including uncertain viability of the grafted fat and a low rate of graft survival. To overcome the problems associated with autologous fat grafts, we used uncultured adipose tissue-derived stromal cell (stromal vascular fraction, SVF) assisted autologous fat grafting. Thus, the purpose of this study was to evaluate the effect of SVF in a clinical trial. Methods SVF cells were freshly isolated from half of the aspirated fat and were used in combination with the other half of the aspirated fat during the procedure. Between March 2007 and February 2008, a total of 9 SVF-assisted fat grafts were performed in 9 patients. The patients were followed for 12 weeks after treatment. Data collected at each follow-up visit included clinical examination of the graft site(s), photographs for historical comparison, and information from a patient questionnaire that measured the outcomes from the patient perspective. The photographs were evaluated by medical professionals. Results Scores of the left facial area grafted with adipose tissue mixed with SVF cells were significantly higher compared with those of the right facial area grafted with adipose tissue without SVF cells. There was no significant adverse effect. Conclusions The subjective patient satisfaction survey and surgeon survey showed that SVF-assisted fat grafting was a surgical procedure with superior results.

• 대한토목학회논문집
• /
• 제31권4C호
• /
• pp.127-136
• /
• 2011

기초사석 위에서 진동하중을 받는 진동다짐판의 침하는 일시적인 진폭과 소성침하로 나타낼 수 있다. 최대 진동하중이 사석의 지지력을 초과하지 않는 한, 소성침하량은 극한값으로 수렴하며 궁극적으로 정상적인 진동을 한다. 이러한 진동다짐의 침하거동에 대한 실내실험은 수평방향이 구속된 시료에 대하여 진동하중이 전체면적에 작용하도록 수행되었거나 진동대에 시료를 놓고 실험을 수행한 것이 대부분이다. 그러나 실제 현장에서는 진동하중이 기초사석 표면적의 일부에만 적용되고 있다. 본 연구에서는 현장조건에 맞게 쇄석에 진동하중을 작용토록 하였다. 쇄석에 대한 진동다짐실험에 따르면 전체 침하량의 약 90%가 2분 이내에 발생하며, 정적 및 동적응력을 포함한 진동응력 수준이 증가할수록 침하는 증가하였다. 진동다짐시, 진동다짐수, 진폭, 침하량, 재하폭, 진동응력의 상관관계를 나타내는 식을 제안하였다.

• 콘크리트학회논문집
• /
• 제21권1호
• /
• pp.13-20
• /
• 2009

본 연구에서는 섬유혼입률이 초고강도 강섬유보강 콘크리트의 인장연화거동 특성에 미치는 영향을 파악하고자 하였다. 노치 낸 보에 대한 3점 재하 휨실험을 통해 초고강도 강섬유보강 콘크리트의 휨인장 거동을 구하고, Uchida 등이 제안한 역해석법을 사용하여 휨 실험 결과로부터 인장연화곡선을 도출하였다. 노치 낸 보의 휨 실험 결과에서 초기강성은 섬유혼입률에 관계없이 일정한 값을 나타내고, 강섬유의 혼입률이 증가할수록 초고강도 강섬유보강 콘크리트의 휨인장강도는 증가하며 연화거동은 일정 균열폭에서 점근적으로 수렴하는 경향을 나타내었다. 역해석을 통해 구한 인장연화곡선으로부터 섬유혼입률과 임계균열폭, $\omega_0$의 함수로 인장연화모델을 제안하였으며, 인장연화모델은 균열이 진행됨에 따라 일정한 인장응력 값을 가지는 소성구간과 지수함수로 주어지는 연화구간으로 나누어 제시하였다. 본 연구에서 제시한 인장연화모델을 적용하여 점성균열모델을 이용한 유한요소해석을 수행한 결과, 해석 결과와 실험 결과와 잘 일치하는 것으로 나타났다.

• 한국주조공학회지
• /
• 제41권5호
• /
• pp.434-444
• /
• 2021

본 연구에서는 미소기공과 Si석출상의 파단으로 구성되는 유효기공 면적분율에 대한 인장특성의 결함민감도 관점에서 Al-Si합금의 인장특성을 공정 Si입자의 분포양상 변화에 대하여 평가하고자 하였다. Al-xSi(x=2,5,8,11)합금의 주방상태 미세조직인 망상구조의 공정 Si입자는 T4처리를 통하여 과립형태로 변형시켰으며, CT분석과 주사전자현미경 관찰을 통하여 미소기공의 분포와 크기를 평가하였다. CT분석과 주사전자현미경의 비교분석을 통하여 인장변형과정에서의 균열성장이 최대 기공율을 포함하는 국부영역에서 발생함을 확인할 수 있었다. 그럼에도 불구하고 이들 분석방법에는 미소기공 인접영역에서의 소성변형집중과 미소기공의 분포양상에 의해 파생되는 실제적인 차이를 포함하기 때문에 정확히 일치된 결과를 얻을 수 없었다. 유효기공 면적분율의 변화에 대한 인장강도와 연신율의 변화는 과립형태보다 망상구조 정출상의 분율변화에 더욱 민감한 의존도를 가진다.

• 한국광물학회지
• /
• 제18권2호
• /
• pp.93-107
• /
• 2005

부산 신항만 및 녹산공단 지역을 포함하는 낙동강 하구 유역에는 두꺼운 점토질퇴적물이 퇴적되어 연약지반을 구성하고 있다. 이곳의 4개의 시추공에서 채취한 점토퇴적물에 대해 광물성분과 공학적 토질물성을 분석하여, 깊이에 따른 변화를 검토하고 그들의 상관관계를 검토하였다. 그 결과 점토퇴적물 속에 함유된 일부 광물조성은 토질물성과 약간의 상관관계가 있는 것으로 나타났다. 즉, 석영의 함량은 습윤단위중량과 정의 관계이고, 액성한계와는 부의 상관관계를 보였다. 함수량은 장석의 함량과는 부의 관계이고, 점토광물의 함량과는 정의 관계를 나타냈다. 습윤단위중량은 점토광물의 함량과는 부의 관계를 나타냈다. 그리고 복합적 인자에 의한 상관분석 결과에서 소성지수는 점토광물, 스멕타이트, 점토입토의 함량과 일정의 관계식을 가지는 것으로 나타났다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제17권2호
• /
• pp.109-129
• /
• 1995

Many patients with malignancies of the head and neck undergo radiation therapy, either as the only method of treatment or in combination with surgery. Radiation therapy has great effect in the case of fairly advanced malignancies which can't be operated radically. But the complication of radiation therapy arise because of damage to the peri- and operated area. It is fully known that irradiated tissue shows retarded healing process in the skin, mucosa and especially vascuslar tissue. The purpose of this study was to observe the healing process of irradiated free or island flap after operation. As Experimental Models, Femoral arterial and venous anastomosis (Group 1), Epigastric-island flap (Group 2) and free Epigastric falp(Group 3) with irradiated postoperative 24 hrs were made on 30 rats/group. As Control Model(Group 4), Free Epigastric flap was not irradiated after operation was chosen on 30 rats. The amount of irradiation was single fraction of 20 Gy using as linear megavoltage accelerator. Difference between Experimental and Control group was evaluated by the method of clinical examination, histopatholoical findings, biochemical analysis and DNA activity at postoperative 1, 3, 7, 14 and 28 days. The results were as follows, 1. Skin color and new epithelization in group 2 and 3 was similar to control group clinically. 2. Postoperarive patency of femoral artery and vien showed 5% and 22% of ischemity. 3. The externa, media and intima of irradiated femoral artery and vein were similar to control group histopathlogically. 4. Granulation and collagen tissue accumulation of irradiated groups were more active due to degenerative and fibrotic changes than control group at postoperative 7 days histopathologically. 5. The hydroxyproline content of all experimental groups were reduced till 14 days and the group 2 was most prominent at postoperative 7 and 28 days(p<0.05). 6. DNA activities of all groups were reduced till 3 days, but begun to recover at 7 days and more activities in control group than irradiated group(p<0.05). Based on the above results, the clinical healing process of free flaps with irradiated postoperative 24 hrs little difference from control group without complications.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.3.1-3.8
• /
• 2018

Background: In this research article, we evaluate the use of sub-periosteal tunneling (tunnel technique) combined with alloplastic in situ hardening biphasic calcium phosphate (BCP, a compound of β-tricalcium phosphate and hydroxyapatite) bone graft for lateral augmentation of a deficient alveolar ridge. Methods: A total of 9 patients with deficient mandibular alveolar ridges were included in the present pilot study. Ten lateral ridge augmentation were carried out using the sub-periosteal tunneling technique, including a bilateral procedure in one patient. The increase in ridge width was assessed using CBCT evaluation of the ridge preoperatively and at 4 months postoperatively. Histological assessment of the quality of bone formation was also carried out with bone cores obtained at the implant placement re-entry in one patient. Results: The mean bucco-lingual ridge width increased in average from 4.17 ± 0.99 mm to 8.56 ± 1.93 mm after lateral bone augmentation with easy-graft CRYSTAL using the tunneling technique. The gain in ridge width was statistically highly significant (p = 0.0019). Histomorphometric assessment of two bone cores obtained at the time of implant placement from one patient revealed 27.6% new bone and an overall mineralized fraction of 72.3% in the grafted area 4 months after the bone grafting was carried out. Conclusions: Within the limits of this pilot study, it can be concluded that sub-periosteal tunneling technique using in situ hardening biphasic calcium phosphate is a valuable option for lateral ridge augmentation to allow implant placement in deficient alveolar ridges. Further prospective randomized clinical trials will be necessary to assess its performance in comparison to conventional ridge augmentation procedures.

• Nano
• /
• 제13권12호
• /
• pp.1850137.1-1850137.9
• /
• 2018

A series of silica surface-capped with hexamethyldisilazane (denoted as $H-SiO_2$) were prepared by liquid-phase in-situ surface-modification method. The as-obtained $H-SiO_2$ was incorporated into acrylic amino (AA) baking paint to obtain AA/$H-SiO_2$ composite extinction paints and/or coatings. $N_2$ adsorption-desorption tests were conducted to determine the specific surface area as well as pore size and pore volume of $H-SiO_2$. Moreover, the effects of $H-SiO_2$ matting agents on the physical properties of AA paint as well as the gloss and transmittance of AA-based composite extinction coatings were investigated. Results show that $H-SiO_2$ matting agents possess a large specific surface area and pore volume than previously reported silica obtained by liquid-phase method. Besides, they have better dispersibility in AA baking paint than the unmodified silica. Particularly, $H-SiO_2$ with a silica particle size of $6.7{\mu}m$ and the dosage of 4% (mass fraction) provides an extinction rate of 95.2% and a transmittance of 79.3% for the AA-based composite extinction coating, showing advantages over OK520, a conventional silica matting agent. Along with the increase in the silica particle size, $H-SiO_2$ matting agents cause a certain degree of increase in the viscosity of AA paint as well as a noticeable decrease in the gloss of the AA-based composite extinction coating, but they have insignificant effects on the hardness and adhesion to substrate of the AA-based composite coatings. This means that $H-SiO_2$ matting agents could be well applicable to preparing low-viscosity and low-gloss AA-based matte coatings.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권3호
• /
• pp.243-248
• /
• 2009

Purpose: Rehabilitation of the edentulous posterior maxilla with dental implants often poses difficulty because of insufficient bone volume caused by pneumatization of the maxillary sinus and by crestal bone resorption. Sinus grafting technique was developed to increase the vertical height to overcome this problem. The present study was designed to evaluate the sinus floor augmentation with anorganic bovine bone (Bio-$cera^{TM}$) using histomorphometric and clinical measures. Patients and methods: Thirteen patients were involved in this study and underwent total 14 sinus lift procedures. Residual bone height was ${\geq}2mm$ and ${\leq}6mm$. Lateral window approach was used, with grafting using Bio-$cera^{TM}$ only(n=1) or mixed with autogenous bone from ramus and/or maxillary tuberosity(n=13). After 6 months of healing, implant sites were created with 3mm diameter trephine and biopsies taken for histomorphometric analysis. The parameters assessed were area fraction of new bone, graft material and connective tissue. Immediate and 6 months after grafting surgery, and 6 months after implantation, computed tomography (CT) was taken and the sinus graft was evaluated morphometric analysis. After implant installation at the grafted area, the clinical outcome was checked. Results: Histomorphometry was done in ten patients.Bio-$cera^{TM}$ particles were surrounded by newly formed bone. The graft particles and newly formed bone were surrounded by connective tissue including small capillaries in some fields. Imaging processing revealed $24.86{\pm}7.59%$ of new bone, $38.20{\pm}13.19%$ connective tissue, and $36.92{\pm}14.51%$ of remaining Bio-$cera^{TM}$ particles. All grafted sites received an implant, and in all cases sufficient bone height was achieved to install implants. The increase in ridge height was about $15.9{\pm}1.8mm$ immediately after operation (from 13mm to 19mm). After 6 months operation, ridge height was reduced about $11.5{\pm}13.5%$. After implant installation, average marginal bone loss after 6 months was $0.3{\pm}0.15mm$. Conclusion: Bio-$cera^{TM}$ showed new bone formation similar with Bio-$Oss^{(R)}$ histomorphometrically and appeared to be an effective bone substitute in maxillary sinus augmentation procedure with the residual bone height from 2 to 6mm.