• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.1
• /
• pp.51-56
• /
• 2001

This study was carried out to interpret mathematically hydraulic behaviour in packing tower which packed 50 mm plastic Hiflow-ring with a dimension of 300 mm wide and 1,400 mm high. In view of energy saving, the recent packing. 50 mm plastic Higlow-ring was superior to conventional packings because of low pressure drop in high loads. As relative error between numerically predicted and experimentally obtained values was less then 6% in the loading and flooding point, it found that therir results appeared to be adequate. Comparison of hose two values in both dry and wet packing conditions. relative errors amount to 3.96 and 5.6%, respectively. In order to evaluate the operating characteristics of packing, the type, size, and material for packings must be estimated in various system and loads. This study is able to calculated pressure drop, hold-up, gas and liquid loads using mathematical interpretation. For these calculation, the specific constants of each packings must be calculated first all. The method of mathematical interpretation in this study turned out to be superior to the existing methods because of reduced errors at loading and flooding point.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.900-904
• /
• 2010

Polyvinyl chloride (PVC) hoses, polyethylene hose and silicone hose for tap water were tested with respect to migration of phenolic compounds to water. The highest concentrations (0.36~1.97 mg/L) of total phenolic compounds were observed in the test water from PVC hoses. Increasing residual Cl concentration from 0 to 0.5 mg/L or increasing water temperature from 4 to $25^{\circ}C$ increased 3~3.2 times and 100~104 times for migrated total phenolic compounds concentrations, in respectively. A major migrating phenolic compounds from PVC hoses were bisphenol-a (BPA) and it was observed that the concentration of migrating phenolic compounds in the order: DEHP > 2-chlorophenol > 2,4,6-trichlorophenol > 2,4-dichlorophenol from PVC hoses.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.395-398
• /
• 2006

Forging is applied for many industrial fields. Also, it is applied to hose nipple. Stress and metal analysis is finding method of forging possibility and we predict this possibility by finite element forging analysis. But there are also many manufacturing procedure after forging, and metal texture is varied by additional heat treatment or coating. So this research is focused on the measuring and analysis of plastic residual stress distribution at overall manufacturing procedure. From raw material to final product we measured real residual stress at each manufacturing procedure by X ray diffract meter, and simulated another procedure except forging by nonlinear finite element analysis. Also we showed how Zn-Ni coating is more contributable to metal strength than Zn coating. By this research we make final conclusion that process analysis must be observed from raw material to final manufacturing state for robust design.

• Fire Science and Engineering
• /
• v.30 no.6
• /
• pp.1-8
• /
• 2016

In cars, the amount of combustibles, such as plastics, textiles, etc., have increased dramatically to improve the fuel efficiency of cars by reducing the gross vehicle weight according to the increases in an oil price and to reduce environmental problems. One or two cars were involved in a parking lot fire prior to the mid-2000 s. On the other hand, there were many parking lot fires where the entire car was destroyed due to increasing the use of plastics. In this study, the quantity of combustibles in a car was 316.2 kg over a total weight 1935 kg. This is 16.34% of total weight and 10 times greater than that three decades earlier. When a sprinkler is installed as a parking lot fire protection system as a substitute for water spray, the water discharge of the sprinkler must maintain the original density of water spray, $20lpm/m^2$. In addition, the use of a hose reel $CO_2$ system at pilotis parking lots must be prohibited because the hose reel $CO_2$ system has no adaptability for a car fire. Instead, this study proposes foam, dry powder, loaded stream systems be used in parking lot fire suppression systems.

• Journal of Fashion Business
• /
• v.5 no.3
• /
• pp.129-143
• /
• 2001

The purpose of this study is to pigeonhole theoretical notions of asymmetry and historical flow of asymmetry designed dresses, understand the trend of asymmetry design in modern fashion and find out its plastic character. The result of this study is as follows. The asymmetry is un-harmony artistic structure that unbalanced left and right in designing. The asymmetry fashion were seen that drapery dress of Egypt, Greece, Rome in ancient times and design by strong color contrast in heraldry and hose, accessory in the middle ages. In modern times, it was seen as complicated and mixed appearance by the influence of post-modernism. The asymmetry designs in modern fashion are shown varied styles by asymmetry of silhouette, detail, fabric, wearing method. The characters of these are a sense of de-construction, formative sense, and exaggeration The asymmetry design must be made by cutting, sewing, and high degree of technique through the latest skill and study.

• Journal of Sericultural and Entomological Science
• /
• v.34 no.2
• /
• pp.6-12
• /
• 1992

To study the effects of irrigation on the mulberry, 3 experiments were conducted. In experiment 1, four treatments, conventional (no irregation), drip irrigation, fertigation and fertigation with 20% extra fertilizer were examined. Irrigation hose was hurried at 20cm depth under the surface (Experiment 1). Water potential was controled at 0.1, 0.2, 0.5 and 1.0 bar to understand the optimum irrigation potential under rain-block system with plastic film hose(experiment 2). Five leading mulberry varieties, Cheongilppong, Youngcheonppong, Suseongppong, Kaeryangppong and Shinilppong were examined for irrigation response(experiment 3). Fertigation and fertigation with extra fefilizer increased yield by 22%, repectively compared with conventional. Irrigation increased by 8%, but with no significance statistically compared with the conventional. Irrigation, especially fertigation increased water content, P$_2$O$_{5}$, $K_2$O and CaO in leaves, suggested improving leaf quality in fall. Fertigation increased available P$_2$O$_{5}$ content in the sub-soil. More root distribution showed at the sub-soil in fertigation. Weed did not occured in fertigation due to sub-soil fertilization, whereas the conventional received surface fertilization showed 931kg/10 a weed in fresh weight. No effect showed at the 20% extra fertilizer than the conventional amount Maximun yield showed at the 0.5 bar water potential. Irrigation increased yield by 22-25% with Cheongilppong and Yongcheonppong, and by 9-13% with Suseongppong, Shinilppong and Kaeryangppong.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.6
• /
• pp.492-499
• /
• 2009

Effect of drip irrigation on soil salinity control and growth of vegetable crops was studied in the three reclaimed lands of Korea in 2007. Drip irrigation was done one or two times per month for reduction of salt stress by using vinyl hose with tiny holes laid on ridge surface under black plastic film mulch during growing season of cabbage and chinese cabbage. It was observed that drip irrigation was generally effective to soil salinity control, but soil salinity variation of some place was not fully solved to lower down under level of free salt stress. It is also considered that high salinity of runoff water spilled out from cultivation ridge plays another key role for soil salinity management. Consequentially, this soil salinity variation might be one of factors brought low average yield and low commercial ratio of agricultural products. Relation between soil salinity and head growth of cabbage and chinese cabbage was well expressed as logarithmic function. Surface soil EC to reach at 50% of growth reduction to the heaviest head can be estimated was $6.1dS^{\circ}{\S}m^{-1}$ for cabbage and $5.7dS\;m^{-1}$ for chinese cabbage transplanted at optimum season.

• Journal of Bio-Environment Control
• /
• v.20 no.3
• /
• pp.197-203
• /
• 2011

This experiment was carried out to investigate the growth characteristics of virus-free sweetpotato in hydroponic bag culture. The rooted one-node and upper-shoot cuttings of 'Yeonhwangmi' and 'Mannamiwere' transplanted into the plastic bag (0.5 mm of thickness, $W300{\times}L1,200{\times}H120mm$) culture system filled with commercial horticultural media (TKS-2, Flora Gard Co.) and cocopeat + perlite (3 : 7, 5 : 5, 7 : 3, (v/v). Nutrient solution of National Horticultural Research Station in Japan was separately irrigated $3times{\times}30minutes$ per day (10:00, 14:00 and 20:00 with timer control) by the drip irrigation. The growth of two varieties was not significantly different among four substrates in 15 days, but it was excellent in commercial horticultural media (TKS-2) and cocopeat 3 : perlite 7 (v/v) in 20 days. The growth in 'Yeonhwangmiwas' promoted than that in 'Mannami', and the upper-shoot cuttings of 'Yeonhwangmi' and 'Mannami' showed a significant vine elongation (over 10 and 2 cm, respectively) compared to the one-node cuttings. Fresh weight and dry weight in cocopeat 3 : perlite 7 (v/v) were significant increased than that in cocopeat 7 : perlite 3 (v/v). Therefore, the bag culture system filed with cocopeat 3 : perlite 7 (v/v) was successfully applied on propagation of virus-free sweetpotato seedling, and the result expected that the bag culture system could be commercialized without high financial costs for farmers.