• Journal of the Korean Vacuum Society
• /
• v.13 no.3
• /
• pp.120-126
• /
• 2004

A damage-reduced trench was investigated in view of the defect distribution along trench sidewall and bottom using high resolution transmission electron microscopy, which was formed by HBr plasma and additive gases in magnetically enhanced reactive ion etching system. Adding $O_2$ and other additive gases into HBr plasma makes it possible to eliminate sidewall undercut and lower surface roughness by forming the passivation layer of lateral etching. To reduce the RIE induced damage and obtain the fine shape trench corner rounding, we investigated the hydrogen annealing effect after trench formation. Silicon atomic migration on trench surfaces using high temperature hydrogen annealing was observed with atomic scale view. Migrated atoms on crystal surfaces formed specific crystal planes such as (111), (113) low index planes, instead of fully rounded comers to reduce the overall surface energy. We could observe the buildup of migrated atoms against the oxide mask, which originated from the surface migration of silicon atoms. Using this hydrogen annealing, more uniform thermal oxide could be grown on trench surfaces, suitable for the improvement of oxide breakdown.

• Biomolecules & Therapeutics
• /
• v.20 no.2
• /
• pp.220-225
• /
• 2012

To develop a ginseng product possessing an efficacy for diabetes, ginseng radix ethanol extract was treated with pectinase and obtained the GINST. In the present study, we evaluate the beneficial effect of GINST on high fat diet (HFD)-induced hyperglycemia and hyperlipidemia and action mechanism(s) in ICR mice. The mice were randomly divided into five groups: regular diet group (RD), high fat diet group (HFD), HFD plus GINST at 75 mg/kg (GINST75), 150 mg/kg (GINST150), and 300 mg/kg (GINST300). Oral glucose tolerance test reveals that GINST improves the glucose tolerance after glucose challenge. Fasting plasma glucose and insulin levels were decreased by 4.3% and 4.2% in GINST75, 10.9% and 20.0% in GINST150, and 19.6% and 20.9% in GINST300 compared to those in HFD control group. Insulin resistance indices were also markedly decreased by 8.2% in GINST75, 28.7% in GINST150, and 36.4% in GINST300, compared to the HFD control group. Plasma triglyceride, total cholesterol and non-esterified fatty acid levels in the GINST300 group were decreased by 13.5%, 22.7% and 24.1%, respectively, compared to those in HFD control group. Enlarged adipocytes of HFD control group were markedly decreased in GINST-treated groups, and shrunken islets of HFD control mice were brought back to near normal shape in GINST300 group. Furthermore, GINST enhanced phosphorylation of AMP-activated protein kinase (AMPK) and glucose transporter 4 (GLUT4). In summary, GINST prevents HFD-induced hyperglycemia and hyperlipidemia through reducing insulin resistance via activating AMPK-GLUT4 pathways, and could be a potential therapeutic agent for type 2 diabetes.

• Korean Journal of Materials Research
• /
• v.9 no.9
• /
• pp.878-882
• /
• 1999

Structural properties of $Al_xGa_1-_xN$ epilayers grown on (0001) sapphire substrate by plasma induced molecular beam epitaxy are investigated in the range of AlN molar fraction from 0.16 to 0.76. The AlN molar fraction estimated by X-ray diffraction agrees well with that of Rutherford backscattering spectroscopy, showing a good linear relationship. The uniform Auger electron microscopy depth profile and linear dependence of average atomic concentration of all the constituents of AlGaN epilayers on AlN molar fraction imply that the epitaxial growth of $Al_xGa_1-_xN$ layers with variation of AlN molar fraction is well controlled without the compositional fluctuation in depth of the epilayer. It is observed by atomic force microscopy that the surface grain shape of $Al_xGa_1-_xN$ epilayer changes from roundish to coalesced one with increasing AlN molar fraction.

• Applied Microscopy
• /
• v.22 no.1
• /
• pp.33-41
• /
• 1992

To clarify the exocytotic features in adrenal medullary aminergic cells, the authors observed rat adrenal medulla prepared by the TAGO method with transmission electron microscope. Rat adrenal medulla contains two types of aminergic cells, adrenergic and noradrenergic, as described. They were present as a group. In a single group both adrenergic and noradrenergic cells were present, but the same kind of cells showed the tendency forming small groups. Adrenergic cells were characterized with the granules having relatively electroluscent cores. These granules were relatively uniform in size, and the cores filled the granules with only thin halos. Noradrenergic cells were characterized with the granules of various size and forms. Most of the cores of these granules were generally more electron-dense than those of the adrenergic cells and only partly filled the granules without forming the halos. But, some granules were very similar in the shape and electron density as those of the adrenergic cells. Even empty-looking granules were present. Exocytotic figures with the classical omega figures were observed in both types of aminergic cells, but they were more frequent in adrenergic cells. These figures were mainly present along the plasma membranes toward the capillary. The excreted materials could be identified in the cleft of the omega figures. Apocrine-like secretory patterns but without cytoplasmic rims were identified in noradrenergic cells. Some vesicles, possibly formed from the cytoplsmic tubular systems were released. Some irregular lamellar structures of varying sizes were also observed. They looked like membranous structures sneaking through the plasma membranes. We could not, however, found any evidences of their involvement in exocytotic processes. These were present toward the capillaries and found only in the adrenergic cells. The authors conclude that the secretory processes in adrenal chromaffin cells may include not only the classical exocytotic processes but also the unusual direct secretions of granules or parts of cellular organelles. The membranous lamellar structures may indicate the remnants of excreted granules or functionally inactive excess membranes of the organelles removed from the cytoplasm.

• Journal of the Korean Society for Heat Treatment
• /
• v.18 no.6
• /
• pp.369-374
• /
• 2005

Nitrogen ion implantation in Nimonic 80A using plasma immersion ion implantation (PIII) was investigated at a pulse voltage of -60 kV and ion dose of $3{\times}10^{17}{\sharp}/cm^2$, $6{\times}10^{17}{\sharp}/cm^2$, $12{\times}10^{17}{\sharp}/cm^2$. PIII is an effective technology to improve the surface hardness and wear resistance of materials. And also this technology is not limited by the shape and size of materials. PIII would be a promising technique in the future. Surface hardness and wear resistance of the $N^+$ ion implanted Nimonic 80A were increased with the increase in the incident ion dose. The surface hardness of the untreated Nimonic 80A is 420 Hv, the hardness of implanted Nimonic 80A is 1050 Hv at $N^+$ ion dose of $12{\times}10^{17}{\sharp}/cm^2$. The wear loss of the untreated is 82.5 mg, the wear loss of the implanted is 0.004g at $N^+$ ion dose of $12{\times}10^{17}{\sharp}/cm^2$. The $Cr_2N$ is detected on the surface of the implanted Nimonic 80A by XRD analysis.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.4
• /
• pp.303-312
• /
• 2007

Recently several studies have been developed not only to apply bone materials to bony defect, but also to use osteogenic and osteoinductive materials to form bone more effectively. In 1998 Mark et al applied gel formation of PRP(platelet-rich plasma) in bony transplantation for mandibular reconstruction as one of the method of stimulating bone formation in maxillofacial area, which is contain of varies growth factors. After he reported that PRP accelerate bone formation, which is used in varies bone transplantation and augmentation with a good result. Especially there are amount of growth factors in PRP, and PRP increase angiogenesis, cell division, and mesenchymal cell growth. Moreover it is capable of osteoconduction, hemostatitis, anti-infection, forming the shape at transplantation, ease of handling, and recipient site stability. So it is known that success rate is high in bone transplantation. However PRP need tissue adhesive to make plasma to solid form. Thrombin and calcium chloride, component of PRP, is extracted from autogenic donor. So it is expensive to extract and there is possibility of hepatitis, AIDS, and hematogenous metastasis. After all, tissue adhesive have the limitation and danger of use. So we are willing to introduce that we had get some idea after using PRF(platelet-rich fibrin) in the various hard and soft tissue bony defect, which is self extracted simply and contain growth factors.

• Korean Journal of Veterinary Research
• /
• v.31 no.1
• /
• pp.89-97
• /
• 1991

For the ultrastructural observation on Babesia gibsoni(B gibsoni), the protozoa were challenged experimentally to splectomized dog. To examine the ultrastructure of the B gibsoni in the erythrocyte, the infected erythrocytes were collected at the cephalic or jugular vein of the dog. The results obtained by TEM(transmission electron microscopy) were as follows; 1. The sizes of protozoa in erythrocytes are $0.92{\pm}0.36{\mu}m{\times}0.67{\pm}0.21{\mu}m$, the sizes of nucleus of the protozoa are $0.55{\pm}0.24{\mu}m{\times}0.38{\pm}0.26{\mu}m$, and sizes of rhoptries in plasma of the protozoa are $0.33{\pm}0.05{\mu}m{\times}0.25{\pm}0.07{\mu}m$, respectively. 2. The tropozoite membrane in the erythrocyte was one, and it's nuclear membrane was made up of double. But the protozoa of initial stage in infected erythrocyte had double clear mambranes, and distinguished from plasma membrane of red blood cell. 3. The mitochondrialike structures covered with two membranes were observed in the protozoa. 4. Mitochondria and vesicles of the reticulocyte were observed near protozoa in the erythrocyte. 5. There are rhoptry, coiled structure and single nucleous in the merozoite. 6. The shape of rhoptry was round or ovoid form and in occasionally, the content of rhoptry was lost partially. 7. There was able to observe the dividing process of the protozoa. 8. Maurer's cleft-like structure was observed.

• Composites Research
• /
• v.12 no.2
• /
• pp.91-100
• /
• 1999

The manufacture of high strength polyethylene(HSPE) tape yarns has been accomplished by a solid state processing(SSP) method as the compaction of ultra-high molecular weight polyethylene(UHMWPE) powders and drawing of the compacted film under the melting point without any organic solvents. In this study, the characteristics of HSPE tape yarns produced by SSP which is desirable for production cost and environmental aspect were analyzed. As the results, tensile strengths of HSPE tape yarns increased with increasing the draw ratio and the fracture morphology of highly drawn HSPE tape yarns showed more fibrillar shape than the low drawn one. Interfacial shear strengths of HSPE tape yarns with vinylester resin increased by $O_2$ plasma treatment and maximum interfacial shear strength was obtained in the plasma treatment condition of 100W and 5min. In addition, mechanical properties of HSPE tape yarn reinforced composites were investigated and compared with those of the gel spun HSPE fiber reinforced composites.

• Composites Research
• /
• v.36 no.2
• /
• pp.101-107
• /
• 2023

In this study, aluminum nitride (AlN) reinforced aluminum (Al) matrix composites are fabricated via plasma arc melting under a nitrogen atmosphere. Within a minute of the chemical reaction between Al and N, dispersed AlN with the shape of transient and lamellar layers is in situ formed in the Al matrix. The composite contains 10 vol.% AlN reinforcements with low thermal resistance and strong bonding at the interfaces, which leads to the unique combination of thermal expansivity and conductivity in the resulting composites. The coefficient of thermal expansion of the composite can be further reduced when Si was alloyed into the Al matrix, which proposes the potential of the in situ Al matrix composites for thermal management applications.

• Journal of the Korean Vacuum Society
• /
• v.16 no.4
• /
• pp.298-304
• /
• 2007

We have studied the effect of $N_2$ flow rate on the structural and optical properties of GaN nanorods grown on (111) Si substrates by radio-frequency plasma-assisted molecular-beam epitaxy. The hexagonal shape nanorods with lateral diameters from 80 to 190 nm with increasing $N_2$ flow rate from 1.1 to 2.0 sccm are obtained. However, the ratio of length (thickness) and compact region increases with increasing $N_2$ flow rate up to 1.7 sccm and then saturate. From the photoluminescence, free exciton transition is clearly observed for GaN nanorods with low $N_2$ flow rate. And the PL peak energies are blue-shifted with decreasing diameter of the GaN nanorods due to size effect. Temperature-dependent photoluminescence spectra for the nanorods with $N_2$ flow rate of 1.7 sccm show an abnormal behavior like "S-shape" with increasing temperature.