• 한국환경복원기술학회지
• /
• 제17권3호
• /
• pp.53-63
• /
• 2014

This study was carried out to investigate the growth responses of medicinal plants such as Glehnia littoralis, Cryptotaenia japonica, Angelica gigas, Reynoutria japonica, Saururus chinensis, Houttuynia cordata, Ligularia fischeri, and Aralia cordata under 70%-shading and full sunlight conditions on a rooftop condition using artificial soil as a growth media. Glehnia littoralis, Cryptotaenia japonica, Ligularia fischeri, Saururus chinensis, and Houttuynia cordata showed better growth on plant height, leaf length, leaf width, petiole length and leaf number under full sunlight conditions on a rooftop condition. Cryptotaenia japonica and Houttuynia cordata had high value of Hunter's a (red-green) under full sunlight, while had lower value of L(lightness) and b(blue-yellow) than those of 70% shading condition. As an index of plant stress response, Glehnia littoralis, Reynoutria japonica, Houttuynia cordata, Ligularia fischeri showed Fv/Fm values 0.79~0.84 under full sunlight in August, indicating low stress on plant growth. Therefore they seemed to be suitable medicinal plats for rooftop conditions. Ligularia fischeri and Reynoutria japonica showed better growth under 70% shading treatment in August, while showed high growth response under full sunlight conditions in September. The 70% shading treatment was effective for the growth of Angelica gigas, Reynoutria japonica, and Aralia cordata. Angelica gigas and Reynoutria japonica, however, showed better plant growth under full sunlight during summer. The results showed that Glehnia littoralis, Cryptotaenia japonica, Ligularia fischeri, Saururus chinensis, and Houttuynia cordat seemed to be suitable medicinal plants for rooftop garden where there is a full sunlight condition.

• 한국환경생태학회지
• /
• 제19권2호
• /
• pp.119-129
• /
• 2005

월악산국립공원의 현존식 생 및 녹지자연도와 조경수목 식재현황을 2004년에 조사하였다. 월악산국립공원의 현존식 생은 총 12개의 식물군락과 기타지역으로 구분되었으며, 신갈나무군락, 소나무군락, 낙엽활엽수림, 침활혼효림 등 자연림은 8개 군락으로, 일본잎갈나무림, 잣나무림 등 인공림은 3개 산림유형으로 구분되었다. 조사지역의 녹지자연도는 8등급 지역이 약$73.08\%$로 가장 넓게 분포하였고, 9등급 지역이 약$11.32\%$로 나타났다. 조사지역의 조경수목 식재현황은 총 44과 129종류가 확인되었으며, 이 중 약 $65.65\%$가 외래종이었다.

• 한국CDE학회논문집
• /
• 제20권4호
• /
• pp.401-411
• /
• 2015

Cybrid virtual plant concept is defined as a cyber plant mimicking a physical plant by using plant engineering data and sensor data coming from sensors attached to facilities of the physical plant. Cybrid virtual plant is a new concept for plant industry so that plant managers and operators' requirements need to be captured for systematic application of the concept to the plant industry. The paper proposed an architecture of the cybrid virtual plant, and provided requirement analysis results for a specific plant company. A database, named smart-cube repository, for the proposed cybrid virtual plant is also proposed and its conceptual data structure is described.

• 한국환경생태학회지
• /
• 제26권4호
• /
• pp.550-558
• /
• 2012

경주국립공원 문화재지정구역에 분포하는 귀화식물은 총 14과 40속 45종 1변종 등 총 46분류군을 확인하였다. 귀화식물을 유형별로 구별해보면, 생활형은 1년생 초본이 17분류군(37%)으로 가장 많았으며, 다년생 초본이 16분류군(34.8%), 2년생 초본이 11분류군(23.9%), 목본이 2분류군(4.3%)로 나타났다. 원산지별로는 유럽이 17분류군(37%)으로 가장 많았으며, 그 다음으로 북아메리카에서 이입된 종이 16분류군(34.8%)으로 나타났다. 또한 귀화도는 3등급이 18분류군(40.9%)으로 가장 높다. 귀화식물 321분류군에 대한 본 연구대상지의 도시화지수는 14.3%이며, 지구별 도시화 지수는 남산지구가 8.1%로 가장 높다. 경주국립공원은 사적형 공원으로 문화재가 매우 중요하나, 문화재 주변의 식재 및 관리 또한 중요하다. 따라서 귀화식물의 경우 장기적인 모니터링과 생태적인 특성을 파악하여 체계적인 관리방안이 요구된다.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.1490-1499
• /
• 2015

본 연구는 여러 분야에서 널리 활용되고 있는 생태면적률 제도 보완을 목적으로 한다. 최근 도시농업에 대한 수요가 증가하고 있는 추세이며, 많은 공동주택단지에서 주민들이 텃밭을 일구고 있지만 이에 대한 건축 및 도시계획적 대응은 부족한 상황이다. 이러한 점에서 본 연구는 이미 널리 활용 중인 생태면적률 제도를 활용하여, 이러한 도시농업에 대한 수요에 대응하는 것이 효과적이라고 생각한다. 다만, 생태면적률 제도는 작물이 아닌 초목 만을 고려한 것으로 작물재배를 위해서는 한계가 분명하다. 이러한 점에서 본 연구는 생태면적률 제도를 보다 확장하여 작물생장 성능까지 담을 수 있는 방안을 모색하고자 했다. 이를 위해서 기존의 생태면적률의 요소에 일조, 간격, 면적, 토심이라는 요소를 더 추가하여 생태면적률의 보완가능성을 분석했다. 본 연구는 기존의 생태면적률 제도를 보완하여 최근의 도시농업의 수요에 대응할 수 있는 방안을 제안했다는 점에서 의미를 지닌다.

• 한국자원식물학회지
• /
• 제19권3호
• /
• pp.418-421
• /
• 2006

In this study, we surveyed the influence of IOA (iodoacetamide) and media upon protoplast fusion for the efficient production of the somatic hybrid among S. sisymbriifolium and other Solanum species (S. intergrifolium and S. toxicarium). Regardless of a breed, as the IOA concentration increases, the cell division tends to decrease. As the influence of the media on the colony formation, we could get 5 colonies from the fusion of S. sisymbriifolium and IOA-treated S. integrifolium protoplast, but none was observed in other fusions. As a result of analyzing their IDH isozyme, we found a somatic hybrid in 2 objects.

• Advances in concrete construction
• /
• 제14권2호
• /
• pp.131-137
• /
• 2022

Based on the design of reinforced concrete columns in Chinese design codes, the failure function of reinforced concrete (RC) columns cannot be expressed as a linear function. This makes it difficult to reveal the level of reliability control in Chinese design code. Therefore, the failure function of dimensionless form is established in this paper, and the typical components (Industrial plant columns) are selected for analysis. At last, numerical simulation proves that the proposed model can be used to analysis reliability of columns. The results based on this model indicate that there is a strong difference in the reliability of RC columns designed with different design parameters, and the reliability would be lower when the eccentricity produced by crane load is smaller.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.69-78
• /
• 2021

Venturi meter is frequently used in feed water flow control system in a nuclear power plant. Its accurate measurement plays a vital role in the safe operation of the plant. This paper firstly investigates the influence of the length of each section of pipeline, the throat inner diameter of Venturi and the flow characteristics in a single-phase flow on the accuracy of Venturi measurement by numerical calculation. Then the flow and the accuracy are discussed in a multi-phase flow. Numerical results show that the geometrical parameters and the characteristics of complex turbulent flow in the single-phase flow have little impact on the accuracy of Venturi flow rate measurement. In the multi-phase flow, the calculated flow rate of Venturi deviated from the actual flow rate and this deviation value is closely related to the amount of steam in the pipeline and increases sharply with the increase of the amount of steam. The over-reading of Venturi flow rate is present.

• 시스템엔지니어링학술지
• /
• 제18권2호
• /
• pp.50-57
• /
• 2022

Along with the development of the 4^th Industrial Revolution technology, artificial intelligence technology is also being used in the field of systems engineering. This study analyzed the development status of artificial intelligence technology in the areas of systems engineering core processes such as stakeholder needs and requirements definition, system requirement analysis, and system architecture definition, and presented future technology development directions. In the definition of stakeholder needs and requirements, technology development is underway to compensate for the shortcomings of the existing requirement extraction methods. In the field of system requirement analysis, technology for automatically checking errors in individual requirements and technology for analyzing categories of requirements are being developed. In the field of system architecture definition, a technology for automatically generating architectures for each system sector based on requirements is being developed. In this study, these contents were summarized and future development directions were presented.

• 한국조경학회지
• /
• 제26권2호
• /
• pp.251-258
• /
• 1998

The purposes of this study was to investigate accuracy and indigenity of landscape plant species in planting design and construction at housing complex and offer basic data for improving precision of planting construction. The scientific name of landscape plant species was described in planting drawings at only two sites among twelve survey sites. According to analysis on indigenity of plant species in planting drawings, it was found that the component ratio of foreign species was the highest and the component ratio of native species at public housing complex was the lowest. The component ratio of landscape plant species in planting construction was severely differed to that of planting drawings. Also the component ratio of cultivar was higher than that of planting drawings due to planting of sevveral cultivars for one species in planting drawings. In the result of accuracy analysis on landscape plant species in planting construction, it was found that mean ratio of inacccurate species was 33.2% at public housing complex, 29.6% at local company housing complex and 26.4% at nationwide company housing complex. It was found that several cultivars were planted for one species in planting drawings. The representative species which were planted by several cultivars were Camellia japonica, Rododendron spp., Prunus spp. and Magnolia spp. and so on. In order to promote the precision and speciality of planting design and construction, scientific and cultivar name of plants should be described in planting drawings.