• Journal of Korean Institute of Architectural Sustainable Environment and Building Systems
• /
• v.12 no.6
• /
• pp.591-605
• /
• 2018

The information on the planar figure of the building envelope is commonly required in various criteria related to the energy performance of the building. However, since the method of creating varies depending on each criterion, the information displayed in the planar figure of the building envelope differs considerably according to the person making the figure. In this regard, this study sought to derive the commonly required information for the unification of the information included in the planar figure of the building envelope, and thus examine the standardization of the planar figure of the building envelope based on BIM. Towards this end, 1) the required information about the planar figure of the building envelope was derived through the literature review and case analysis results submitted to the energy performance evaluation agencies, and 2) the standardized output technology using IFC was investigated based on the required information. Therefore, it is expected that the findings of this study will help to create a general-purpose planar figure for the building envelope, and this study can serve as the preliminary research for automatically extracting the information on the planar figure of the building envelope.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.560-567
• /
• 2004

In this paper, the design and implementation of a high power(300W) forward converter using a planar transformer is presented. The overall size and volume of the converter is decreased by replacing a planar transformer in stead of using a conventional winding transformer. Due to the decreased size and volume, power density of the applied forward converter is increased. Also, in this paper, the 300W ZVS forward converter with active clamp snubber circuit is compared to the 300W hard switching forward converter planar transformer, the decreased size and volume, the 300W ZVS forward converter with active clamp snubber circuit, 30W hard switching forward converter.

• Imaging Science in Dentistry
• /
• v.34 no.2
• /
• pp.91-97
• /
• 2004

Purpose : This study was performed to evaluate the diagnostic value of both planar and SPECT imagings by comparing the results with the clinical and other imaging modalities findings. Materials and Methods: A total of 578 joints with TMJ complaints were examined using planar scintigraphy and SPECT. The planar scintigraphy and SPECT findings were analyzed and compared to the clinical findings of pain, clicking, crepitus and limitation of mouth opening. Moreover we compared the accuracy of the planar scintigraphy and SPECT methods with the one of the panoramic, transcranial, tomographic and MR imaging methods. Results: The planar scintigraphy and SPECT methods showed a high sensitivity of 0.76-0.84 and low specificity of 0.25-0.45 toward the clinical findings: pain, clicking, crepitus and mouth opening restriction. Simple radionuclide uptake ratio was high in each group of patients with pain, crepitus, limitation of mouth opening (p < 0.05) complaints, in each group with positive bone changes on panoramic, transcranial or tomographic images, and in disc displaced group. Conclusion: Although both planar and SPECT imagings have limited specificity, these techniques are sensitive for detection of internal derangement of the TMJ.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05b
• /
• pp.19-22
• /
• 2004

The resonant planar transformer, which had power capacity of 300 W, input voltage of 220 V, output voltage of 15 V, and switching frequency of 500 kHz, was designed and manufactured by using the planar core with large effective area and the flat copper lead frames for miniaturization and high efficiency of the switching mode power supply (SMPS). As well as, a resonant converter equipped with the above mentioned planar transformer was manufactured and electromagnetic characteristics were investigated. The numerical value of turns for 1st and 2nd winding were 12 and 2 respectively. The self inductance of 1st winding was 33.2 ${\mu}H$, very low leakage inductance of 1.27 ${\mu}H$, and the coupling factor of 0.98 were obtained at switching frequency of 300 kHz. The high efficiency of 88.21 % for the SMPS equipped with planar transformer was obtained at power capacity of 300 W.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.11 s.104
• /
• pp.1295-1302
• /
• 2005

This paper shows experimental evaluation results of the nano-positioning planar scanner used in the scanning probe microscope. The planar scanner is composed of flexure guides, piezoelectric actuators and feedback sensors as like explained in detail in Ref. (5). First, the fabrication methods were explained. Second, as the static Properties of the Planar scanner. we evaluated the maximum travel range & crosstalk. Also, we presented the correcting method for crosstalk using electric circuits finally. as the dynamic properties of the planar scanner, we evaluated the first resonant frequency. Also, we presented the actual AFM(atomic force microscope) imaging results with up to 2Hz imaging scan rate. Experimental results show that properties of the proposed planar scanner are well enough to be used in SPM applications like AFM.

• Journal of applied mathematics & informatics
• /
• v.17 no.1_2_3
• /
• pp.643-651
• /
• 2005

In the first part of this paper we investigate several statements concerning infinite maximal planar graphs which are equivalent in finite case. In the second one, for a given induced $\theta$-path (a finite induced path whose endvertices are adjacent to a vertex of infinite degree) in a 4-connected VAP-free maximal planar graph containing a vertex of infinite degree, a new $\theta$-path is constructed such that the resulting fan is tight.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.5 no.2
• /
• pp.34-41
• /
• 1986

The ultrasonical characteristics of inclined planar reflectors is investigated by the maximum amplitude method. The reflected ultrasound is varied by the reflector size, shape, inclination and using transducers. It was found that the detecting ability for planar reflectors was decreased with increasing transducer size and misorientation angle and increased with decreasing ultrasonic frequency, also the misorientation angle of planar reflectors affected significantly for the measurement of refklector size.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.4
• /
• pp.1305-1319
• /
• 2015

We study the relations between strong isoperimetric inequalities and Gromov hyperbolicity on planar graphs, and give an alternative proof for the following statement: if a planar graph of bounded face degree satisfies a strong isoperimetric inequality, then it is Gromov hyperbolic. This theorem was formerly proved in the author's paper from 2014 [12] using combinatorial methods, while geometric approach is used in the present paper.

• Bulletin of the Korean Mathematical Society
• /
• v.49 no.2
• /
• pp.359-365
• /
• 2012

Giving a planar graph G, let $x^'_l(G)$ and $x^{''}_l(G)$ denote the list edge chromatic number and list total chromatic number of G respectively. It is proved that if a planar graph G without 6-cycles with chord, then $x^'_l(G){\leq}{\Delta}(G)+1$ and $x^{''}_l(G){\leq}{\Delta}(G)+2$ where ${\Delta}(G){\geq}6$.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.253-256
• /
• 2000

We report the experimental results for the coupling properties of the an side-polished single-mode fiber covered with metal-clad planar waveguide. The experimental results show that the large birefringence of a metal-clad planar waveguide facilitates the effective separation of TE and TM polarization in the spectral domain. Additionally the resonant wavelengths of the device are tuned based in the thermo-optic effect of polymer planar waveguide.