• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 1989년도 가을 학술발표회 논문집
• /
• pp.15-18
• /
• 1989

The planar effects on the concrete pavements Is mainly due to the concrete shrinkage, subgrade friction, and thermal expansion or contraction. A complete understanding of analytical behavior of concrete pavement requires the development of computer model, stiffness matrix and equivalent nodal load matrices due to the effects mentioned above. A computer program, INPLANE II, has been written to evaluate the planar effects on concrete pavements. The planar effects determine to what degree the joint open and also help In determining factors which affect the joint stiffnesses and structural behavior of concrete Pavements.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.119-122
• /
• 1987

By cascading the step discontinuities on planar dielectric waveguides with a ferrite layer through two uniform planar dielectric waveguides, nonreciprocal scaterring characteristics of planar dielectric waveguide gratings are analyzed. The calculated results at 35GHz shows that the isolation mechanism takes place near band stop frequency range.

• Journal for History of Mathematics
• /
• 제18권4호
• /
• pp.125-134
• /
• 2005

In this paper we introduce the historical development of the theories for the planar domains. Also we deal with the representative domains of the planar domains and study the properties of the new representative domains.

• Korean Journal of Optics and Photonics
• /
• 제18권3호
• /
• pp.185-189
• /
• 2007

A novel technology for CWDM (Coarse Wavelength Division Multiplexer) utilizing a PLC (Planar Lightwave Circuit)-AWG (Arrayed Waveguide Grating) fabrication process is proposed. BPM (Beam Propagation Method) Simulation results on the employed parabolic-horn-type input slab waveguide of AWG and the performance of the 20 nm-channel spacing CWDM with flattened passband are presented. Waveguides of $0.75{\triangle}%$ have been used in this experiment and the insertion loss at the peak wavelength is 3.5 dB for a Gaussian spectrum and is 4.8 dB for a flat-top spectrum. The bandwidth at 3 dB is better than 10 nm and 13 nm for Gaussian and flat-top spectra, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제12권1호
• /
• pp.36-49
• /
• 1987

A planar waveguide model is presented for calculating dispersion characteristics of the normalized phase velocity and characteristic impedance with the frequency dependent effective dielectric constand and effective width in microstrip lines of the hybrid mode. Eeff(f) and Weff(f) are applied to a planar waveguide model by using an empirical relations and formula designed for CAD purposes as a function of frequency. A wide range of relative dielectric constants and the strip $h_{width}$strate height(W/h ratios), $0.5$\leq$W/h\leq2.5$ are used. These results are compared with static value, spectral domain analysis, and empirical results. As the result of a computer simulation, in the case of using a planar waveguide model, the frequency dependent normalized phase velocity is more closely approached to 1/ and characteristic impedance is more increased than the other method that has already been presented as the increasing of the frequency. And, the case of applying Eeff(f) designed for the purpose of CAD to this proposed model is show in better result than the case of using a empirical relations.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제53권8호
• /
• pp.119-126
• /
• 2016

In this paper, we proposed the planar textile resonator for constructing wearable MR-WPT system and analyzed the characteristic of textile substrates used in resonators. The planar textile resonators were designed to resonate at 1-10 MHz. The loop and coil were fabricated planar structure on textile substrate using conductive materials. Polyester fiber and cotton widely used in real life were chosen as textile resonators for wearable applications and copper tape and silver paste were used for fabricating planar loop and coil on textile substrate. For comparison analysis on transfer efficiency according to the types of textile, transmitter and receiver parts were symmetric. According to the result, for the highest transfer efficiency of wearable WPT system, the planar resonators have specifications of relative thick textile substrate with low permittivity and low surface resistance of conductive pattern. The performed experiments show that the planar textile resonator is possible to be used for resonator in wearable MR-WPT system.

• Journal of IKEEE
• /
• 제22권1호
• /
• pp.68-73
• /
• 2018

In this paper, we propose an efficient algorithm for mapping a $360^{\circ}$ circular image to a planar image. The proposed algorithm consists of obtaining size of the planar image, calculating the distance between the camera and the planar image, calculating horizontal angle of camera and planar image, calculating vertical angle between camera and planar image, calculating the position of a pixel that matches pixels in a $360^{\circ}$ circular image to pixels in a planar image. Experiments were performed to evaluate the efficient algorithm for mapping the proposed $360^{\circ}$ circular image to the plane image. The reconstruction rate of the mapped plane image was confirmed 99% and the image quality of the mapped plane image was confirmed 72%. Since the results were higher than the standard values of commercial software, the effectiveness of the algorithm was confirmed.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• 제16권6호
• /
• pp.499-508
• /
• 2023

In this paper, we propose a technique to estimate the coordinates of feature points existing on a 2D planar object in the three dimensional space. The proposed method detects multiple 3D features from the image, and excludes those which are not located on the plane. The proposed technique estimates the planar homography between the planar object in the 3D space and the camera image plane, and computes back-projection error of each feature point on the planar object. Then any feature points which have large error is considered as off-plane points and are excluded from the feature estimation phase. The proposed method is archived on the basis of the planar homography without any additional sensors or optimization algorithms. In the expretiments, it was confirmed that the speed of the proposed method is more than 40 frames per second. In addition, compared to the RGB-D camera, there was no significant difference in processing speed, and it was verified that the frame rate was unaffected even in the situation that the number of detected feature points continuously increased.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.137-138
• /
• 2013

• Bulletin of the Korean Mathematical Society
• /
• 제51권2호
• /
• pp.511-517
• /
• 2014

In this paper, we prove that the 3-cycle is light in the family of 1-planar graphs with minimum vertex degree at least 5 and minimum edge degree at least 12. This generates a known result of Fabrici and Madaras [8].