• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.17-21
• /
• 2003

In this paper, we design an optimal planar array geometry for maximum side-lobe reduction. The concept of thinned array is applied to obtain an optimal two dimensional(2-D) planar array structure. First, a 2-D rectangular array with uniform spacing is used as an initial planar array structure. Next, we modify the initial planar array geometry with the aid of thinned array theory in order to reduce the maximum side-lobe level. This is implemented by a genetic algorithm under some constraint, minimizing the maximum side-lobe level of the 2-D planar array. It is shown that the optimized planar array structure can achieve low side-lobe level without optimizing the excitations of the array antennas.

• Journal of applied mathematics & informatics
• /
• 제27권3_4호
• /
• pp.531-539
• /
• 2009

In this paper we first present a structure theorem for an infinite locally finite 3-connected VAP-free planar graph, and in connection with this result we study a possible classification of infinite locally finite planar graphs by reducing modulo finiteness.

• 반도체디스플레이기술학회지
• /
• 제8권2호
• /
• pp.59-62
• /
• 2009

In order to check the validation of LC simulation, 0.7 inch LCOS panel in full-HD resolution was fabricated and used for the electro-optical measurement. Compared the measured data with the calculated data, the averaged difference was 1.72% under 0 ~ +6 V bias on pixel electrode. To improve the optical characteristics of full-HD LCOS panel, the planar structure and trench structures (0.1 um, 0.2 um and 0.3 um-in-depth) between adjacent pixels were investigated with LC simulation. The planar structure showed the higher reflectance and faster reflectance-voltage response time than the trench structure. The optical fill factor and contrast ratio of planar structure were also higher than those of trench structures. As compared 1 um-in-depth trench structure resembled to the real structure with the planar structure, the optical fill factor was improved by 1.15% and the contrast ratio was improved by 5.26%. In order to minimize the loss of luminance and contrast ratio, the planar structure need to be applied between adjacent pixels.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.274-279
• /
• 2014

This paper investigates the line dynamic forces connecting tugs and a floater, where the planar motion of the floater is due to the weather criteria during the position keeping of the offshore structure by tugs. The analysis situation consists of the position keeping states for the seabed mooring line connection work of the offshore structure at the offshore site. Specifically, the decision about the tug power capacity for the position keeping is essential and depends on the weather criteria, line characteristics, length of line, etc. The planar motion of the structure is constrained by the interference of the installation vessel's operational range, behavior of the underwater fairlead, and other surrounding structures. In this paper, the tug line forces and planar motion of an offshore structure are summarized dependent on the tug line length and line material characteristics in the states fora given floater draft and weather criteria. The tug line dynamic forces and planar motion evaluated here will be used to determine the proper tug power and clearance of an offshore structure.

• Journal of applied mathematics & informatics
• /
• 제4권1호
• /
• pp.235-242
• /
• 1997

We characterize the tight structure of a vertex-accumula-tion-free maximal planar graph with no separating triangles. Together with the result of Halin who gave an equivalent form for such graphs this yields that a tight structure always exists in every 4-connected maximal planar graph with one end.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.35-38
• /
• 2005

In this paper, a wideband balun of tapered structure using planar microstrip is desigde ad analyzed. The balun structure was fabricated on a Teflon substrate with a thickness of 0.8mm and relative dielectric constant ${\varepsilon}_r$ of 2.5. Two back-to back CPW-to-CPS transitions were simulated and optimized using HFSS. A movel plaar balun using tapered structure of microstip to CPW is suggested and designed. The measurement result, the bandwidth for a reflection coefficient better than -10dB of the balun is 2GHz to 8GHz. The planar balun can improved the performance of wide band spiral antenna.

• Earthquakes and Structures
• /
• 제12권6호
• /
• pp.673-687
• /
• 2017

A three-dimensional; structural health monitoring; vertical; planar; cross-sample entropy; multiscaleA three-dimensional structural health monitoring (SHM) system based on multiscale entropy (MSE) and multiscale cross-sample entropy (MSCE) is proposed in this paper. The damage condition of a structure is rapidly screened through MSE analysis by measuring the ambient vibration signal on the roof of the structure. Subsequently, the vertical damage location is evaluated by analyzing individual signals on different floors through vertical MSCE analysis. The results are quantified using the vertical damage index (DI). Planar MSCE analysis is applied to detect the damage orientation of damaged floors by analyzing the biaxial signals in four directions on each damaged floor. The results are physically quantified using the planar DI. With progressive vertical and planar analysis methods, the damaged floors and damage locations can be accurately and efficiently diagnosed. To demonstrate the performance of the proposed system, performance evaluation was conducted on a three-dimensional seven-story steel structure. According to the results, the damage condition and elevation were reliably detected. Moreover, the damage location was efficiently quantified by the DI. Average accuracy rates of 93% (vertical) and 91% (planar) were achieved through the proposed DI method. A reference measurement of the current stage can initially launch the SHM system; therefore, structural damage can be reliably detected after major earthquakes.

• 한국컴퓨터정보학회논문지
• /
• 제27권1호
• /
• pp.33-41
• /
• 2022

본 논문은 유전체 기판 상에 설계한 평면형 마이크로스트립 패치 안테나를 기술하였다. 5세대 이동통신 적용을 위하여 2가지 타입의 평면형 마이크로스트립 패치 안테나를 연구하였으며 한 타입은 일반적인 마이크로스트립 구조이며 다른 한 타입은 동축 프로브 급전의 적층된 마이크로스립 구조이다. 전자기적인 커플링 방식을 사용한 적층된 마이크로스트립 패치는 다층기판 구조에서 설계되었다. 본 논문에서 제안한 적층된 마이크로스트립 패치 안테나는 3.42GHz~3.70GHz 광대역의 5G 서비스 대역에서 양호한 결과를 나타냈다. 임피던스 대역폭(VSWR≤2)은 3.42GHz~3.78GHz에서 360MHz(10.28%)를 나타냈다. 본 논문의 적층된 마이크로스트립 패치 안테나의 설계를 통하여 5G 이동통신 중계 시스템에 적용가능성을 확인하였다.

• Journal of Microbiology and Biotechnology
• /
• 제13권4호
• /
• pp.495-500
• /
• 2003

Tight junctions (TJ) between adjacent Sertoli cells in testis are important for the formation of the blood testis barrier (BTB). In an effort to verify the reproductive health risk of endocrine-active chemicals (EACs), changes in the transepithelial electrical resistance (TER) and the expression of TJ genes were examined by co-planar polychlorinated biphenyl (PCB) treatment in cultured mouse Sertoli cells. Although the increase in TER of Sertoli cells was accelerated by 10 nM co-planar PCB, it was downregulated by 100 nM co-planar PCB. The expression of claudin-1 was downregulated by co-planar PCB in a concentration-dependent manner. On the contrary, the expression of claudin-1 was increased in the Sertoli cells by 10 nM co-planar PCB treatment. These results suggest that the structure and function of TJ may be targeted by co-planar PCB in Sertoli cells. Assessment of the structure and function of TJ in Sertoli cells might be useful for screening the reproductive health risk of EACs.

• 한국전자파학회논문지
• /
• 제27권3호
• /
• pp.253-260
• /
• 2016

본 논문에서는 항공기 탑재용 경량화 지지 구조를 갖는 평면 LPDA(Log-Periodic Dipole Array) 안테나를 제안한다. 제안된 안테나는 항공기 탑재에 적합하도록 가볍고, 구조적 진동에 견딜 수 있는 평면형 골격 지지 구조를 적용하여 설계하였다. 평면형 골격 지지 구조의 재질은 강도와 온도 특성이 우수한 Peek(Polyether ether ketone)를 사용하였으며, 제안된 안테나는 지지 구조 양면에 LPDA 안테나 방사소자를 결합하여 제작되었다. 지지 구조 유전체로 인하여 변화된 입력 임피던스는 일부 방사소자 간격과 길이를 조절하여 매칭시켰다. 설계된 평면 LPDA 안테나의 10-dB 반사손실 대역폭은 시뮬레이션 및 측정 결과, 각각 0.4~3.1 GHz(7.3:1), 0.41~3.5 GHz(8.2:1)로 광대역이었다. 평균 이득은 0.5~3 GHz 대역내에서 시뮬레이션은 평균 6.77 dBi, 측정은 6.55 dBi이었다. 따라서 설계된 안테나는 가볍고 견고한 구조와 광대역 지향성 방사특성을 가져 항공기 탑재 용도로 적합함을 확인하였다.