• 산업공학
• /
• 제16권3호
• /
• pp.344-351
• /
• 2003

Critical dimension is one of the most important characteristics of up-to-date integrated circuit devices. Hence, critical dimension control in a semiconductor wafer fabrication process is inevitable in order to achieve optimum device yield as well as electrically specified functions. Currently, in complex semiconductor wafer fabrication processes, statistical methodologies such as Shewhart-type control charts become crucial tools for practitioners. Meanwhile, given a critical dimension sampling plan, the analysis of variance technique can be more effective to investigating critical dimension variation, especially for on-chip and on-wafer variation. In this paper, relating to a typical sampling plan, linear statistical models are presented for the analysis of critical dimension variation. A case study is illustrated regarding a semiconductor wafer fabrication process.

• 한국건설관리학회논문집
• /
• 제6권3호
• /
• pp.72-80
• /
• 2005

최근 재건축에 대한 규제가 강화됨에 따라 리모델링에 대한 관심이 높아지고 있는 추세이며, 기존 아파트의 경우에도 발코니 확장 등을 목적으로 내력벽을 철거하는 등 아파트 평면에 대한 변경사례가 증가하고 있다. 그러나 이와 같은 평면변경에는 구조안전에 대한 검토가 반드시 수반되어야 함에도 불구하고 이에 대한 인식은 크게 부족하며, 리모델링과 관련한 기존의 연구도 대부분 경제성 향상 측면에 초점을 맞추고 있어 구조적 안전성 측면에서의 연구는 부족한 실정이다. 이에 본 연구에서는 최근 진행되고 있는 리모델링 사례 및 국내 대형 건설사들의 아파트 평면분석을 통해 아파트 평면변경에 수반되는 평면변경요소를 추출하고 이의 적용에 따른 구조요소별 응력변화 영향을 분석하였다. 분석 결과, 벽체축력은 독립 벽체를 제거하였을 때, 슬래브 모멘트는 ㄱ자형 벽체를 맞닿은 수직벽체와 함께 제거하였을 때 가장 불리한 결과를 초래하는 것으로 나타났다. 본 연구의 결과는 리모델링이나 발코니 확장 등 평면변경을 목적으로 벽체를 제거함으로 인해 유발되는 벽체와 슬래브의 응력변화를 예측하고 평가하는데 활용할 수 있을 것으로 기대된다.

• 교육시설
• /
• 제14권4호
• /
• pp.53-65
• /
• 2007

The present research has been conducted on the arranged form, the number and kinds, the area, the location of the rooms and the variation on exterior designs, based on a layout and a ground plan of each step, which are general plan, VE proposal and the final negotiation, for 11 elementary and middle and high schools that are designed in the way of BTL project. In consequence, it has been found out that there are some changes in the number and position of the rooms. However, the changes are not exceeding the overall arrangement form. This could not have led to the original aim, which is to induce creativity by PFI. It can be supposed that it is because the BTL system is stick to the old process, the method of financial investment and it is true to say that there needs to be solution for that.

• 교육시설
• /
• 제16권3호
• /
• pp.41-48
• /
• 2009

The purpose of this research is to find out the problem of plan composition by use the school building. The research was performed through the checking of 13 high schools which were built after 1997 in Busan. Followings are the result of the research. Presently, all the schools are divided classes into different levels and teach students, however, it is only limited to English and Mathematics and being carried on mostly for 1st graders. Moreover, although the plan is composed Department System plan which intended to ues new various learning method, schools have changed their plan into Usual with Variation type which is old educational program and renovated a few classes for certain subjects. Due to above reasons, the new kinds of space for Department System plan is used only as a study room by reform or even not used at all. Therefore, improvement of those problems are significant in schools.

• 한국측량학회지
• /
• 제13권2호
• /
• pp.219-228
• /
• 1995

1960년대 이후 건설된 발전시설들이 오늘날에 이르러 노후화 되었고, 급속히 늘어나는 전력 소비량을 충당하기 위해 각종 발전시설들이 확충되고 있다. 따라서 이들 시설물에 대한 안전성확보차원의 조치가 이루어져야 한다. 본 연구에서는 전력구조물의 유지관리방안마련에 대한 일환으로 RC시험보를 제작 구성하여 외력작용시 RC시험 보의 변형 상태에 대한 모니터링과 변형량 산출을 위해 근거리사진측량방법에 대한 방법을 모색하였고, 이를 토대로 토류벽공사현장에 대한 변형량산출 및 모니터링을 통한 변형상태 파악 및 지하굴착으로 인한 인접구조물에 미치는 영향을 측정·해석 하므로서 전력구조물에 대한 유지관리에 활용할 수 있는 자료를 제공하였다.

• Wind and Structures
• /
• 제24권2호
• /
• pp.95-118
• /
• 2017

The present study revealed comparison the pressure distribution on the surfaces of regular cross plan shaped building with angular cross plan shaped building which is being transformed from basic cross plan shaped building through the variation of internal angles between limbs by $15^{\circ}$ for various wind incidence angle from $0^{\circ}$ to $180^{\circ}$ at an interval of $30^{\circ}$. In order to maintain the area same the limbs sizes are slightly increased accordingly. Numerical analysis has been carried out to generate similar nature of flow condition as per IS: 875 (Part -III):1987 (a mean wind velocity of 10 m/s) by using computational fluid dynamics (CFD) with help of ANSYS CFX ($k-{\varepsilon}$ model). The variation of mean pressure coefficients, pressure distribution over the surface, flow pattern and force coefficient are evaluated for each cases and represented graphically to understand extent of nonconformities due to such angular modifications in plan. Finally regular cross shaped building results are compared with wind tunnel results obtained from similar '+' shaped building study with similar flow condition. Reduction in along wind force coefficients for angular crossed shaped building, observed for various skew angles leads to develop lesser along wind force on building compared to regular crossed shaped building and square plan shaped building. Interference effect within the internal faces are observed in particular faces of building for both cases, considerably. Significant deviation is noticed in wind induced responses for angular cross building compared to regular cross shaped building for different direction wind flow.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.115-116
• /
• 2018

• 한국시뮬레이션학회논문지
• /
• 제8권4호
• /
• pp.73-87
• /
• 1999

Order Review/Release (ORR) System is the linkage between planning system and actual production. Reduction of the waiting time on the machines, work in process and lead time variation may be achieved by adopting ORR strategies. But researchers on the ORR do not agree on the effectiveness of ORR. Some say that the overall system flow time may be increased if ORR is adopted, but others say that ORR can reduce work in process, flow time and variation of flow time. The objective of this research is to clarify under what environments order release strategy is effective. Simulation study was conducted in a hypothetical job shop. The experimental results show that dispatching rule is much more important than ORR is in controlling the shop floor. But the results indicate that ORR can reduce mean shop flow time, average work in process and variation of shop flow time under such environments where utilization level is high and planned order is weekly released to the order pool. And the results also show that the effect of plan smoothing on the ORR is insignificant, which is inconsistent with the results of the previous researches.

• 한국농촌건축학회논문집
• /
• 제16권3호
• /
• pp.37-44
• /
• 2014

This study is to clarify the actual conditions of the floor plan of middle and high schools in the rural area. Recently, many middle school and high school are remodeling the buildings and facilities based on the departmentalized classroom system. This study, through analyzing on 4 remodeling cases of middle and high schools in gyeongnam. This article discuses about the basic characteristics of the plan composition and the education programs of 4 schools. This study is showing the variation before and after remodeling and space organization types. The results of this study are summarized as follows; Home-room and home-base should be more faithfully. Various common space is needed to comfortable school life of students. In case of side corridor type plan, moving path is much needed. Sample schools took much more spaces of home base than before. This article discusses about the basic characteristics of the floor plan and the actual condition of the school facilities.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권12호
• /
• pp.570-575
• /
• 2006

This paper develops methodology in order to consider CHP(Combined Heat and Power) capacity in the Basic Plan of Long Term Electricity Supply & Demand. We develop generating cost of CHP considering electric and heat. Also we develop mixed load duration curve which includes the electric load and heat load and then apply CHP capacity to SCM(Screening Curve Method) considering CHP feature. Accordingly, it decide the optimal CHP capacity in the Basic Plan of Long Term Electricity Supply & Demand. Also, We perform the sensitivity analysis according to cost variation.