• 제목/요약/키워드: Plan Unit

검색결과 1,096건 처리시간 0.021초

인필식 유닛모듈러 공법을 활용한 학교시설의 리모델링 계획시 영향요인 (A Study on Effect Factors of Using Infill Unit-Modular Construction for Remodeling plan of School Facilities)

  • 전영훈;김균태;김석
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 추계 학술논문 발표대회
    • /
    • pp.138-139
    • /
    • 2016
  • In this study, we propose a way of infill unit-modular construction for school facilities and identify the main effect factors when planning a remodeling of the school facilities by using infill unit-modular construction. This study is limited to have document for domestic infill modular construction such as technical data, knowhow due to fewer cases and research. we expect to study on an practical alternative for infill modular housing specifically.

  • PDF

수질오염총량관리 단위유역별 오염물질 배출부하량 특성분석 - 금강수계를 대상으로 (Characterization on the Pollution Discharge Load at the Unit Watershed for the Management of Total Maximum Daily Loads - in Guem River Basin)

  • 박준대;최옥연;오승영
    • 한국물환경학회지
    • /
    • 제28권6호
    • /
    • pp.786-795
    • /
    • 2012
  • Water quality management should be focused on the pollution concentrated area so that the improvement of water quality can be achieved effectively for the management of Total Maximum Daily Loads (TMDLs). It is necessary to consider discharge characteristics in the TMDL plan. This study analysed discharge characteristics such as pollution generation and discharge load density, and reduction potential by each unit watershed, and categorized the unit watershed into four groups according to its discharge load characteristics. This analysis can be used as helpful information for the prioritization of pollution reduction area and selection of pollution reduction measures in the development of TMDL plans.

중환자실간호사와 병동간호사의 직무스트레스, 소진 및 직무만족도 정도비교 (compare the level of job stress, burn-out and job satisfaction between intensive care unit nurses and general unit nurses)

  • 오은화;양소명;김소현;유하나;진은영;김여진;김영희
    • 대한한의정보학회지
    • /
    • 제22권1호
    • /
    • pp.27-36
    • /
    • 2016
  • Purpose: The purpose of this study was to compare the level of job stress, burn-out and job satisfaction between intensive care unit nurses and general unit nurses. Methods: The subjects of this study were 100 intensive care unit nurses and 100 general unit nurses in university's hospitals. The data were collected using self-report questionnaires. The data were analyzed by descriptive statistics, -test, ANCOVA, t-test, ANOVA, and Pearson correlation coefficient by using the SPSS WIN 20.0 program. Results: There were significantly negative correlation in the score of job stress and job satisfaction in both groups of nurses. Job stress of intensive care unit nurses was significantly differences according to department satisfaction. Burn-out of intensive care unit nurses was significantly differences according to position, department satisfaction. Job satisfaction of intensive care nurses unit was significantly differences according to department satisfaction. Job stress of general unit nurses unit was significantly differences according to department satisfaction. Burn-out of general unit nurses was significantly differences according to clinical experience, position, department satisfaction. Job satisfaction of general unit nurses was significantly differences according to clinical experience, department satisfaction. Conclusions: The appropriate rewards for intensive care nurses and general unit nurses to decrease their job stress will be needed in hospital settings. In addition, a plan for systemic nurse training program is needed to provide high quality nursing education for each unit nurses effectively.

  • PDF

STUDY ON MONITORING UNIT EFFICIENCY OF FLATTENING-FILTER FREE PHOTON BEAM IN ASSOCIATION WITH TUMOR SIZE AND LOCATION

  • Kim, Dae Il;Kim, Jung-In;Yoo, Sook Hyun;Park, Jong Min
    • Journal of Radiation Protection and Research
    • /
    • 제38권4호
    • /
    • pp.194-201
    • /
    • 2013
  • To investigate monitoring unit (MU) efficiency and plan quality of volumetric modulated arc therapy (VMAT) using flattening-filter free (FFF) photon beam in association with target size and location. A virtual patient was generated in Eclipse$^{TM}$ (ver. A10, Varian Medical Systems, Palo Alto, USA) treatment planning system. The length of major and minor axis in axial view was 50 cm and 30 cm, respectively. Cylindrical-shaped targets were generated inside that patient at the center (symmetric target) and in the periphery (asymmetric target, 7.5 cm away from the center of the patient to the right direction) of the virtual patient. The longitudinal length was 10 cm and the diameters were 2, 5, 10 and 15 cm. Total 8 targets were generated. RapidArc$^{TM}$ plans using TrueBeam STx$^{TM}$ were generated for each target. Two full arcs were used and the axis of rotation of the gantry was set to be at the center of the virtual patient. Total MU, homogeneity index (HI), target mean dose, the value of gradient measure and body mean dose were calculated. In the case of symmetric targets, averaged total MU of FFF plan was 23% and 19% higher than that of flattening filter (FF) plan when using 6 MV and 10 MV photons, respectively. The difference of HI, target mean dose, gradient measure and body mean dose between FF and FFF was less than 0.04, 2.6%, 0.1 cm and 2.2%, respectively. For the asymmetric targets, total MU of FFF plan was 21% and 32% was higher than that of FF when using 6 MV and 10 MV photons, respectively. The homogeneity of the target was always worse when using FFF than using FF. The maximum difference of HI was 0.22. The target mean dose of FFF was 3.2% and 4.1% higher than that of FF for the 6 MV and 10 MV, respectively. The difference of gradient measure was less than 0.1 cm. The body mean dose was higher when using FFF than FF about 4.2% and 2.8% for the 6 MV and 10 MV, respectively. No significant differences between VMAT plans of FFF beam and FF beam were observed in terms of quality of treatment plan. The HI was higher when using FFF 10 MV photons for the asymmetric targets. The MU was increased noticeably when using FFF photon beams.

5 · 16 군정기 지방행정 환경변화와 모범부락조성사업에 대한 고찰 (A Study of the Local Administration Environment Change and 'Mobum Burak Development' in 5 · 16 Military Government Period)

  • 서만용;박수영
    • 농촌지도와개발
    • /
    • 제20권3호
    • /
    • pp.643-678
    • /
    • 2013
  • 본 연구의 목적은 5 16 군정기 지방행정의 많은 환경변화 속에서 각 도가 추진한 '모범부락조성사업'을 통해 초기 농촌마을개발사업에 대한 모습, 특히 지방행정이 사업의 주체가 되기 위해 추진한 방법을 검토하여 시사점을 찾는데 있다. 군정기(1961~1963) 지방행정은 시군을 기초자치단체로 하는 행정체계 개편, 국가기획제도 도입, 지방세제 개편, 새로운 농촌기구 설립으로 인한 농촌지도 다원화 등의 여러 변화요인을 맞게 되었다. 이러한 환경 속에서 지역의 개발행정 주축은 지방자치단체로 옮겨져 갔고, 각 도는 '보고가는 마을(전북)', '빛나는 마을(충남)'등의 각종 명칭으로 모범부락조성사업을 추진하였다. 또한 내무부는 지역개발의 장기적인 종합계획으로서 군 건설계획의 작성과 추진을 지시하였다. 본 연구는 국가 정책을 중심으로 한 농촌지역개발사에서 도 단위의 지방사를 발굴하고 이를 지방행정 환경변화와 연계하여 분석하였다는 측면에서 향후 관련 연구의 기초자료로 활용될 수 있으리라 판단된다.

개선된 GOP 단위의 스무딩 알고리즘 (Enhanced Smoothing Algorithm Using GOP Unit)

  • 이면재
    • 디지털콘텐츠학회 논문지
    • /
    • 제12권4호
    • /
    • pp.485-490
    • /
    • 2011
  • 스무딩은 가변 비트율로 저장된 비디오 데이터를 클라이언트로 전송할 때 일련의 고정 비트율로 전송할 수 있도록 전송 계획을 세우는 것으로 이러한 스무딩 알고리즘에는 CBA, MCBA, MVBA 등이 있다. 그러나, 이 알고리즘들은 프레임 단위로 전송 계획을 세우므로 프레임 버스트 또는 GOP 버스트가 발생할 수 있다. 이를 개선하기 위하여 MVBAG 알고리즘에서는 GOP 단위로 전송률을 계산한다. 그러나, 이 알고리즘에서는 계산된 전송률보다 급격히 프레임의 크기가 작거나 큰 경우에는 QoS를 보장하지 못할 수 있다. 본 논문에서는 MVBAG 알고리즘의 문제점을 개선하는 알고리즘을 제안하고 QoS를 만족시키지 못하는 프레임 개수, 프레임당 평균 전송률 변화량, GOP당 평균 전송률 변화량과 같은 평가 요소를 사용하여 성능을 평가한다. 실험 결과, 제안 알고리즘은 QoS를 만족하는 프레임 개수 비교에서 우수함을 보인다.

개발제한구역 내 생태공원 조성방안에 관한 연구 - 서식처 및 생태통로로서의 기능강화를 중심으로 - (A Study on the Development of an Ecological Park Planning Model to Enhance the Functions of Habitats and Ecological Corridors in Green Belt Areas)

  • 김대희;최희선;김현애;김귀곤
    • 환경영향평가
    • /
    • 제20권3호
    • /
    • pp.367-379
    • /
    • 2011
  • This study was conducted to develop an ecological park planning model to enhance the functions of habitats and ecological corridors in Green Belt Areas, because changing policies have resulted in the degredation of the Green Belts due to progressive fragmentation of ecosystems. The principal outcome of the study is to plan an ecological park model through the restoration of habitats. In order to evaluate the capacity of the model to enhance the ecological functions of habitats and ecological corridors in Green Belt Areas, a simulation of habitats was carried out in the Sungnam-Yusoo region. The model was developed via following steps: 1. Selection of candidate sites and selection of the study site by analyzing development factors; 2. Selection of target species that can represent the habitat at the site; 3. Analysis of the site's suitability index for the target species; 4. Establishment of a conceptual plan to enhance and expand the currently produced suitability index; 5. Creation of a master plan based on the conceptual plan; and 6. Evaluation of the enhanced and expanded suitability index of the site. The study showed that the Habitat Unit (HU) of Rana coreana, which was selected as the target species of the study, increased from $28,044m^2$(3.6%) to $224,352m^2$(28.8%), and the HU of the site as the ecological corridor for wild animals increased from $4,674m^2$(0.6%) to $152,684m^2$(19.6%). The study results show that the ecological deficits of the Green Belt Area can be overcome by enhancing the ecological functions of the region, which should be beneficial. The model could be utilized for effective enhancement and management of other Green Belt Areas.

강원도 도시재생사업계획 수립을 위한 정책 과제 진단 (Diagnosis of the Policy Tasks for the Execution of an Urban Regeneration Project Plan in Gangwon-do)

  • 함광민
    • 한국환경과학회지
    • /
    • 제30권5호
    • /
    • pp.391-397
    • /
    • 2021
  • This study aims to establish the measures required for strengthening the internal stability of and executing the systematic plan for Gangwon-do in relation to the "urban regeneration preliminary project" launched by the Ministry of Land, Infrastructure, and Transport. The results of this study are as follows. The unit project carried out via the Gangwon-do urban regeneration preliminary project presented the tendency for the standardization of the H/W and S/W projects such as the establishment of the community anchor space and the resident competency reinforcement project. Further, rather than focusing on the contents that could objectively measure the effects of the project, it concentrated more on the performance indicators that are required for verifying the execution of unit projects like the establishment of buildings and operating programs. It was found to be insufficient with regard to the practicality of the project, the correlation with the New Deal Project, and the validity of the project contents. To improve these aspects, Gangwon-do would be required to highlight its distinguishability from the other regions and increase its practicality by operating the field-centered urban regeneration educational program, inducing the participation of experts in each of the areas in case there is a need to execute a project plan and discover a project with placeness. It also needs to focus on strengthening its connection with the urban regeneration new deal project by discovering the resident leaders and professional manpower, and establishing the performance indicators needed for systematically monitoring the regional changes in accordance to the urban regeneration preliminary project.

백워드 설계 모형을 적용한 가정교과 식생활 단원의 교수·학습 과정안 개발 (Development Teaching-Learning Plan for 'Food and Nutrition unit' of Home Economics Based on Backward Design Model)

  • 최서아;주수언
    • 한국가정과교육학회지
    • /
    • 제30권3호
    • /
    • pp.175-193
    • /
    • 2018
  • 본 연구는 가정과 수업에서 학습자의 영속적 이해를 돕기 위하여 2015 개정 중학교 가정교과 '식생활' 단원을 Wiggins와 McTighe가 제시한 백워드 설계 모형을 활용하여 교수·학습 과정안을 설계하는 데 목적이 있다. 이를 위하여 2015 개정 교육과정의 성취기준과 내용 요소를 분석하고, 중학교 '식생활' 단원을 1차시부터 8차시에 해당하는 교수·학습 과정안을 개발하였다. 그 결과 첫째, 2015 개정 중학교 가정교과 '식생활 단원'의 성취기준에서는 '청소년기 영양의 중요성', '청소년기 식생활 문제', '식행동 평가'를 통하여 식생활 관리 방안이 강조되었다. 학습요소는 '균형잡힌 식사', '청소년기 영양', '식사의 계획과 선택'이었고, 영양소 판단능력과 균형잡힌 식생활 능력으로 교과역량을 설정하였다. 식생활 단원의 12종 교과서 내용을 분석한 결과 대부분의 교과서에서 핵심 개념들을 중심으로 다루고 있었지만 '청소년기 영양'과 '식생활', '식행동'에 대한 영속적 이해를 도모하는 내용이나 활동이 부족한 것으로 나타났다. 둘째, 교수·학습 과정안의 개발은 백워드 설계 모형의 3단계 절차에 따라 개발되었으며 자가 점검과 전문가 검토를 거쳐 최종 8차시의 템플릿을 완성하였다. 이는 2015 개정 교육과정의 의도를 구현한 수업 방식을 위해 학교 현장에서 가정과 교사가 수업에 활용하고 적용하여 수업 설계에 도움을 줄 수 있을 것으로 생각된다.

최신 산업동향을 고려한 공업단지 사용량 원단위 분석 연구 (Investigation and Analysis of Unit Industrial Water Usage Considering Latest Industrial Trend)

  • 김기범;유영준;최우진;구자용
    • 상하수도학회지
    • /
    • 제31권5호
    • /
    • pp.447-457
    • /
    • 2017
  • This study derived the unit of industrial water usage reflecting the latest industry trends. Available for establishing plans such as the master plan for water supply system and analyzed changes in the basic unit by a comparison with the current basic unit values. This study analyzed 4,038 samples with a sampling error of less than 1.5 % at the 95 % confidence level after removing outliers according to a log-normal distribution. As a result, the unit of industrial water usage per site area in the whole manufacturing industry was 7.11 m3/1,000m2/d. The ten industrial categories (C10, C13, C20, C21, C22, C25, C27, C30, C32, C33) showed a similar unit value compared to before, and the four industrials categories (C11, C17, C22, C31) showed a more unit value than before. With regard to the nine industrial categories (C14, C15, C16, C18, C19, C24, C26, C28, C29), the unit value decreased. Cases that companies examined before were the same as the companies examined in this study were analyzed. The result that the changes in the unit industrial water usage were reasonable was obtained. However, in some industrial categories (C17, C14, C24, C29), the unit value was changed by a small number of companies with large-scale water use or unit value of sampling had a large deviation. It was considered necessary to survey them periodically. The unit of industrial water usage derived by the survey in this study reflects the current industrial trends in 2016. Water use in manufacturing companies has continuously changed by the development of manufacturing technologies and simplification of manufacturing processes. In order to deal with this, it is considered necessary to survey the usage of industrial water periodically from a long-term perspective.