• Title/Summary/Keyword: Plan Unit

Search Result 1,096, Processing Time 0.025 seconds

A Study on Effect Factors of Using Infill Unit-Modular Construction for Remodeling plan of School Facilities (인필식 유닛모듈러 공법을 활용한 학교시설의 리모델링 계획시 영향요인)

  • Jun, Young-Hun;Kim, Kyoon-Tai;Kim, Seok
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2016.10a
    • /
    • pp.138-139
    • /
    • 2016
  • In this study, we propose a way of infill unit-modular construction for school facilities and identify the main effect factors when planning a remodeling of the school facilities by using infill unit-modular construction. This study is limited to have document for domestic infill modular construction such as technical data, knowhow due to fewer cases and research. we expect to study on an practical alternative for infill modular housing specifically.

  • PDF

Characterization on the Pollution Discharge Load at the Unit Watershed for the Management of Total Maximum Daily Loads - in Guem River Basin (수질오염총량관리 단위유역별 오염물질 배출부하량 특성분석 - 금강수계를 대상으로)

  • Park, Jun Dae;Choi, Ok Youn;Oh, Seung Young
    • Journal of Korean Society on Water Environment
    • /
    • v.28 no.6
    • /
    • pp.786-795
    • /
    • 2012
  • Water quality management should be focused on the pollution concentrated area so that the improvement of water quality can be achieved effectively for the management of Total Maximum Daily Loads (TMDLs). It is necessary to consider discharge characteristics in the TMDL plan. This study analysed discharge characteristics such as pollution generation and discharge load density, and reduction potential by each unit watershed, and categorized the unit watershed into four groups according to its discharge load characteristics. This analysis can be used as helpful information for the prioritization of pollution reduction area and selection of pollution reduction measures in the development of TMDL plans.

compare the level of job stress, burn-out and job satisfaction between intensive care unit nurses and general unit nurses (중환자실간호사와 병동간호사의 직무스트레스, 소진 및 직무만족도 정도비교)

  • Oh, Eun-Wha;Yang, So-Myoung;Kim, So-Hyun;You, Ha-Na;Chin, Eun-Young;Kim, Yeo-Jin;Kim, Young-hee
    • Journal of the Korean Institute of Oriental Medical Informatics
    • /
    • v.22 no.1
    • /
    • pp.27-36
    • /
    • 2016
  • Purpose: The purpose of this study was to compare the level of job stress, burn-out and job satisfaction between intensive care unit nurses and general unit nurses. Methods: The subjects of this study were 100 intensive care unit nurses and 100 general unit nurses in university's hospitals. The data were collected using self-report questionnaires. The data were analyzed by descriptive statistics, -test, ANCOVA, t-test, ANOVA, and Pearson correlation coefficient by using the SPSS WIN 20.0 program. Results: There were significantly negative correlation in the score of job stress and job satisfaction in both groups of nurses. Job stress of intensive care unit nurses was significantly differences according to department satisfaction. Burn-out of intensive care unit nurses was significantly differences according to position, department satisfaction. Job satisfaction of intensive care nurses unit was significantly differences according to department satisfaction. Job stress of general unit nurses unit was significantly differences according to department satisfaction. Burn-out of general unit nurses was significantly differences according to clinical experience, position, department satisfaction. Job satisfaction of general unit nurses was significantly differences according to clinical experience, department satisfaction. Conclusions: The appropriate rewards for intensive care nurses and general unit nurses to decrease their job stress will be needed in hospital settings. In addition, a plan for systemic nurse training program is needed to provide high quality nursing education for each unit nurses effectively.

  • PDF

STUDY ON MONITORING UNIT EFFICIENCY OF FLATTENING-FILTER FREE PHOTON BEAM IN ASSOCIATION WITH TUMOR SIZE AND LOCATION

  • Kim, Dae Il;Kim, Jung-In;Yoo, Sook Hyun;Park, Jong Min
    • Journal of Radiation Protection and Research
    • /
    • v.38 no.4
    • /
    • pp.194-201
    • /
    • 2013
  • To investigate monitoring unit (MU) efficiency and plan quality of volumetric modulated arc therapy (VMAT) using flattening-filter free (FFF) photon beam in association with target size and location. A virtual patient was generated in Eclipse$^{TM}$ (ver. A10, Varian Medical Systems, Palo Alto, USA) treatment planning system. The length of major and minor axis in axial view was 50 cm and 30 cm, respectively. Cylindrical-shaped targets were generated inside that patient at the center (symmetric target) and in the periphery (asymmetric target, 7.5 cm away from the center of the patient to the right direction) of the virtual patient. The longitudinal length was 10 cm and the diameters were 2, 5, 10 and 15 cm. Total 8 targets were generated. RapidArc$^{TM}$ plans using TrueBeam STx$^{TM}$ were generated for each target. Two full arcs were used and the axis of rotation of the gantry was set to be at the center of the virtual patient. Total MU, homogeneity index (HI), target mean dose, the value of gradient measure and body mean dose were calculated. In the case of symmetric targets, averaged total MU of FFF plan was 23% and 19% higher than that of flattening filter (FF) plan when using 6 MV and 10 MV photons, respectively. The difference of HI, target mean dose, gradient measure and body mean dose between FF and FFF was less than 0.04, 2.6%, 0.1 cm and 2.2%, respectively. For the asymmetric targets, total MU of FFF plan was 21% and 32% was higher than that of FF when using 6 MV and 10 MV photons, respectively. The homogeneity of the target was always worse when using FFF than using FF. The maximum difference of HI was 0.22. The target mean dose of FFF was 3.2% and 4.1% higher than that of FF for the 6 MV and 10 MV, respectively. The difference of gradient measure was less than 0.1 cm. The body mean dose was higher when using FFF than FF about 4.2% and 2.8% for the 6 MV and 10 MV, respectively. No significant differences between VMAT plans of FFF beam and FF beam were observed in terms of quality of treatment plan. The HI was higher when using FFF 10 MV photons for the asymmetric targets. The MU was increased noticeably when using FFF photon beams.

A Study of the Local Administration Environment Change and 'Mobum Burak Development' in 5 · 16 Military Government Period (5 · 16 군정기 지방행정 환경변화와 모범부락조성사업에 대한 고찰)

  • Seo, Man Yong;Park, Su Young
    • Journal of Agricultural Extension & Community Development
    • /
    • v.20 no.3
    • /
    • pp.643-678
    • /
    • 2013
  • The purposes of study are to examine early appearance of rural village development that local administration firstly promoted through the 'Mobum Burak Development' promoted in environment change around the local government in 5 16 military government period and find implications of the current rural village development. During the military government period(1961~1963), rural administration showed lots of changes such as reorganization of administration system whose basic local government are si gun, introduction of national planning system and spread of si gun, reorganization of rural taxation system, diversification of extension caused by the establishment of rural facilities such as new Nong-hyup, RDA, etc. Thus, the main axis of development administration of counties was transferred from central government or American aid organization to local administration. According to the basic operation plan introduced after the 5 16 as a planning system, the Ministry of Home Affairs instructed to write and promote gun construction plan based on all conditions of gun as long-term general plan of rural development. Therefore, each do established general plans such as 'Nongdo Jeonbuk Geundaehwa Plan', 'Yakjin Gyeongbuk Plan', 'Jeonnam Miraesang', etc. and Mobum Burak Development was promoted by all kinds of titles such as 'Bogoganeun Maeul(Jeonbuk)', 'Bitnaneun Maeul(Chungnam)', 'Hyeokmyeong Chon(Gyeonggi)', 'Saemaeul geonseol(Gyeongnam)', etc. as a business of rural village development. But, business contents of gun's 'construction plan' couldn't be mutually connected although Mobum Burak Development and unit business contents were promoted by duplicated plan. It became useless general plan as times went by as business focusing on short-term outcomes rather than construction based on long-term region. Mobum Burak Development also borrowed contents community development business, but military government couldn't approach basic solution of village and regional agriculture by focusing on short-term outcome, without imitation of form and procedure. This study is judged to be utilized as basic data of following studies because rural village development companies focusing on national policies discovered unit rural companies and analyzed them by connecting to environment changes of rural administration.

Enhanced Smoothing Algorithm Using GOP Unit (개선된 GOP 단위의 스무딩 알고리즘)

  • Lee, Myoun-Jae
    • Journal of Digital Contents Society
    • /
    • v.12 no.4
    • /
    • pp.485-490
    • /
    • 2011
  • Smoothing is a transmission plan where variable rate video data is converted to a constant bit rate stream. These smoothing algorithms include CBA, MCBA, MVBA, PCRTT and others. But, these algorithms build a transmission plan per frame unit. So, these algorithms cause frame burst or GOP burst. In order to improve it, MVBAG algorithm build a transmission plan per GOP. But this algorithm may not guarantee QoS when frame's size is abruptly larger or smaller than the computed transmission rate. In this paper, a smoothing algorithm is proposed to enhance MVBAG algorithm's problem. In order to show the proposed algorithm's performance, the proposed algorithm is compared with MVBAG algorithm using various evaluation factors such as number of frames that do not meet the QoS, average transmission rate variability per frame, average transmission rate variability per GOP. Experimental results show that the proposed algorithm outperforms MVBAG algorithm in number of frames that do not meet the QoS.

A Study on the Development of an Ecological Park Planning Model to Enhance the Functions of Habitats and Ecological Corridors in Green Belt Areas (개발제한구역 내 생태공원 조성방안에 관한 연구 - 서식처 및 생태통로로서의 기능강화를 중심으로 -)

  • Kim, Dae-Heui;Choi, Hee-Sun;Kim, Hyun-Ae;Kim, Kwi-Gon
    • Journal of Environmental Impact Assessment
    • /
    • v.20 no.3
    • /
    • pp.367-379
    • /
    • 2011
  • This study was conducted to develop an ecological park planning model to enhance the functions of habitats and ecological corridors in Green Belt Areas, because changing policies have resulted in the degredation of the Green Belts due to progressive fragmentation of ecosystems. The principal outcome of the study is to plan an ecological park model through the restoration of habitats. In order to evaluate the capacity of the model to enhance the ecological functions of habitats and ecological corridors in Green Belt Areas, a simulation of habitats was carried out in the Sungnam-Yusoo region. The model was developed via following steps: 1. Selection of candidate sites and selection of the study site by analyzing development factors; 2. Selection of target species that can represent the habitat at the site; 3. Analysis of the site's suitability index for the target species; 4. Establishment of a conceptual plan to enhance and expand the currently produced suitability index; 5. Creation of a master plan based on the conceptual plan; and 6. Evaluation of the enhanced and expanded suitability index of the site. The study showed that the Habitat Unit (HU) of Rana coreana, which was selected as the target species of the study, increased from $28,044m^2$(3.6%) to $224,352m^2$(28.8%), and the HU of the site as the ecological corridor for wild animals increased from $4,674m^2$(0.6%) to $152,684m^2$(19.6%). The study results show that the ecological deficits of the Green Belt Area can be overcome by enhancing the ecological functions of the region, which should be beneficial. The model could be utilized for effective enhancement and management of other Green Belt Areas.

Diagnosis of the Policy Tasks for the Execution of an Urban Regeneration Project Plan in Gangwon-do (강원도 도시재생사업계획 수립을 위한 정책 과제 진단)

  • Ham, Kwang-Min
    • Journal of Environmental Science International
    • /
    • v.30 no.5
    • /
    • pp.391-397
    • /
    • 2021
  • This study aims to establish the measures required for strengthening the internal stability of and executing the systematic plan for Gangwon-do in relation to the "urban regeneration preliminary project" launched by the Ministry of Land, Infrastructure, and Transport. The results of this study are as follows. The unit project carried out via the Gangwon-do urban regeneration preliminary project presented the tendency for the standardization of the H/W and S/W projects such as the establishment of the community anchor space and the resident competency reinforcement project. Further, rather than focusing on the contents that could objectively measure the effects of the project, it concentrated more on the performance indicators that are required for verifying the execution of unit projects like the establishment of buildings and operating programs. It was found to be insufficient with regard to the practicality of the project, the correlation with the New Deal Project, and the validity of the project contents. To improve these aspects, Gangwon-do would be required to highlight its distinguishability from the other regions and increase its practicality by operating the field-centered urban regeneration educational program, inducing the participation of experts in each of the areas in case there is a need to execute a project plan and discover a project with placeness. It also needs to focus on strengthening its connection with the urban regeneration new deal project by discovering the resident leaders and professional manpower, and establishing the performance indicators needed for systematically monitoring the regional changes in accordance to the urban regeneration preliminary project.

Development Teaching-Learning Plan for 'Food and Nutrition unit' of Home Economics Based on Backward Design Model (백워드 설계 모형을 적용한 가정교과 식생활 단원의 교수·학습 과정안 개발)

  • Choi, SeoA;Ju, Sueun
    • Journal of Korean Home Economics Education Association
    • /
    • v.30 no.3
    • /
    • pp.175-193
    • /
    • 2018
  • The course of home economics education is the one that fosters the ability to solve life problems. The life problem is permanent involving the individual, family, and society in overall. Thus, this study was to compose a class which applied the backward design model suggested by Wiggins and McTighe focusing on the usability of it in the educational filed of the home science to overcome the limitation of the education in the filed based on that critical mind. Therefore, this study developed the teaching·learning plan applying the backward design model to the 'Food and Nutrition' unit of the home economics education. It is expected that the unit and the teaching plan are used as materials for the class on the dietary life unit which is meaningful for learners in the educational field of the home economics education.

Investigation and Analysis of Unit Industrial Water Usage Considering Latest Industrial Trend (최신 산업동향을 고려한 공업단지 사용량 원단위 분석 연구)

  • Kim, Kibum;Yu, Youngjun;Choi, Woojin;Koo, Jayong
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.31 no.5
    • /
    • pp.447-457
    • /
    • 2017
  • This study derived the unit of industrial water usage reflecting the latest industry trends. Available for establishing plans such as the master plan for water supply system and analyzed changes in the basic unit by a comparison with the current basic unit values. This study analyzed 4,038 samples with a sampling error of less than 1.5 % at the 95 % confidence level after removing outliers according to a log-normal distribution. As a result, the unit of industrial water usage per site area in the whole manufacturing industry was 7.11 m3/1,000m2/d. The ten industrial categories (C10, C13, C20, C21, C22, C25, C27, C30, C32, C33) showed a similar unit value compared to before, and the four industrials categories (C11, C17, C22, C31) showed a more unit value than before. With regard to the nine industrial categories (C14, C15, C16, C18, C19, C24, C26, C28, C29), the unit value decreased. Cases that companies examined before were the same as the companies examined in this study were analyzed. The result that the changes in the unit industrial water usage were reasonable was obtained. However, in some industrial categories (C17, C14, C24, C29), the unit value was changed by a small number of companies with large-scale water use or unit value of sampling had a large deviation. It was considered necessary to survey them periodically. The unit of industrial water usage derived by the survey in this study reflects the current industrial trends in 2016. Water use in manufacturing companies has continuously changed by the development of manufacturing technologies and simplification of manufacturing processes. In order to deal with this, it is considered necessary to survey the usage of industrial water periodically from a long-term perspective.