• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.133-136
• /
• 2012

In this paper, we found the many effective ways and apply for improve the 3D quality of Autostereoscopic 3D display products. Autostereoscopic products compared to traditional 3D glasses, the disadvantage is the poor depth of 3D picture quality and it only can see the fixed distance and position. So, for the compensate this disadvantage, we use the Head tracking technology and video placement algorithms and several techniques. In this paper, the will report on how to improve the Parallax Barrier Autostereoscopic 3D quality through the Head tracking of the user identification, video replacement algorithms and crosstalk improving method.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.1
• /
• pp.31-42
• /
• 2007

The purpose of this study was to compare the stress distribution according to the splinting condition and non-splinting conditions on the finite element models of the two units implant prostheses. The finite element model was designed with the parallel placement of two fixtures ($4.0mm{\times}11.5mm$) on the mandibular 1st and 2nd molars. A cemented abutment and gold screw were used for superstructures. A FEA models assumed a state of optimal osseointegration, as the bone quality, inner cancellous bone and outer 2 mm compact bone was designed. This concluded that the cortical and trabecular bone were assumed to be perfectly bonded to the implant. Splinting condition had 2 mm contact surface and non-splinting condition had $8{\mu}m$ gap between two implant prosthesis. Two group (Splinting and non-splinting) were loaded with 200 N magnitude in vertical axis direction and were divided with subdivision group. Subdivision group was composed of three loading point; Center of central fossa, the 2 mm and 4 mm buccal offset point from the central fossa. Von Mises stress value were recorded and compared in the fixture-bone interface and bucco-lingual sections. The results were as follows; 1. In the vertical loading condition of central fossa, splinting condition had shown a different von Mises stress pattern compared to the non-splinting condition, while the maximum von Mises stress was similar. 2. Stresses around abutment screw were more concentrated in the splinting condition than the non-splinting condition. As the distance from central fossa increased, the stress concentration increased around abutment screw. 3. The magnitude of the stress in the cortical bone, fixture, abutment and gold screw were greater with the 4 mm buccal offset loading of the vertical axis than with the central loading.

• Archives of Plastic Surgery
• /
• v.33 no.5
• /
• pp.563-569
• /
• 2006

Purpose: In the correction of cleft lip, there have been various methods to minimize recurrence of the nasal deformity after primary nasal surgery. After cheiloplasty and primary nasal surgery, we tried to elongate the columella of the cleft side, to stretch the vestibular lining of cleft side, and to elevate the alar cartilage of the cleft side with a molding prong. Methods: We had fifteen cleft lip patients; 12 unilateral cases(6.3-8.2 months), and 3 bilateral cases(3 - 7.5 months). Immediately after primary repair of the cleft lip, the toboggan shaped molding prong was located to deep inside of vestibular web of the cleft side. It was persistently suspended by a silicone tube which was connected to the prong and the frontal scalp. The results were analyzed with $Photoshop^{(R)}$ photogrammetrically for 6 - 48 months with on average of 20.6 months. We measured the proportion index of columellar length-interalar distance for three times(preoperation, immediate postoperation, and postoperation) on the nasal base views. Results: In unilateral, the index had a significant increase statistically between preoperation(10.73) and immediate postoperation(23.96). It is supposed that columellar length was reconstructed to 105.80% of normal side. But, it was decreased to maintain 87.7% of normal side in postoperation(20.54). The results were similar in bilateral. The linear scars by suture penetrating nose skin were not discernable. Conclusion: In summary, placement of the molding prong could elongate the reconstructed columella with some relapse postoperatively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6863-6869
• /
• 2014

A SMT machine is used to place electronic components on a PCB precisely. To place it precisely, after a component inspection, it finds an offset value using a vision camera, and places the precise position on the PCB. In general, to inspect the components with a vision camera, the components stop in front of the camera for inspection, then move to the placement position. On the other hand, if they do not stop in front of a camera, the inspection time will be shortened and the productivity would be increased. In this thesis, when inspecting without stopping in front of a camera, the fastest way among various routes is described. For the gantry passing over a vision camera, both the distance and speed of a gantry moving trajectory were studied, and there was approximately 5% speed increment when using the method suggested in this thesis.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.3
• /
• pp.41-50
• /
• 2010

This paper presents an investigation result that is made to determine dominant influencing factors and their specific impacts on motorist detour makings for VMS placements on freeway. This was necessary to provide engineers with a tool for evaluating VMS cost-effectiveness and its feasibility. This research found that additional travel time delay is the most influential variable in determining motorist detour makings. Also, more than 70% freeway motorists recognize the adjacent national roads as their detour routes, and both AADT and the distance to the entering point of the detour path are found to be dominating factors. Motorist detour ratio model by VMS placement on freeway is developed based on the Stated Preference. In model validation, actual detour making behaviors observed by the Revealed Preference values verify the detour ratio on the Stated Preference. These research findings should be useful for cost-effective placements of VMS on freeway, and it is recommended that the results be tested by practicing engineers in the ITS sector.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.12
• /
• pp.54-61
• /
• 2011

We propose a surveillance-alert system based on optimal placements of PDR(Pulsed Doppler Radar) sensors in USN. By using the detection information of moving target from PDR sensor and by considering the covered detection region and geographical property of the strategic area, three optimal placements of sensors are proposed. The proposed placement are named as the grid type, the linear type and the zigzag type. Also, the surveillance alert system based on three sensor placements are developed. The alert level of the proposed surveillance-alert system are 'Perception', 'Caution', 'Warning' and 'Danger' which are decided by the distance change between the moving targets and the command post. The performace of the developed system is verified via outdoor experiments.

• Journal of Life Science
• /
• v.14 no.4
• /
• pp.593-607
• /
• 2004

The nucleotide sequence for a nuclear-encoded small subunit rDNA (SSU rDNA) was determined for 43 species of the class Dinophyceae, including harmful algae Cochlodinium polykrikoides and Gyrodinium aureolum. These sequences and data analyses were performed by parsimony, distances and maximum likelihood methods in PHYLIP (Phylogenetic Inference Package) version 3.573c. The species Noctiluca scintillans, Gonyaulax spinifern and Crypthecodinium cohnii occupied a basal position within the Dino- phyceae in our analyses. The genera Alexandrium and Symbiodinium were monophyletic (supported by a bootstrap value of >70%), whereas the genera Gymnedinium and Gyrodinium formed polyphyletic nodes, for which bootstrap support was strong (>70%) in the neighbor-joining and maximum likelihood methods except for the PHYLIP parsimony analysis (=59%). The sequence divergence between G. aureolum and G. dorsum/ G. galathenum was the largest at 7.4% (45 bp), whereas G. aureolum and G. mikimotoi showed an extremely low value of genetic divergence of 0.9% (5 bp). The genetic divergence between C. polykrikoides and G. aureolum was a low value of 5.2% (31 bp). In the phylogenetic analysis, the placement of G. aureolum and C. polykrikoides was closer to the genus Gymnodinium than to the genus Gyrodinium, which was supported by a moderate bootstrap value.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1670-1679
• /
• 2011

In the area of wireless sensor networks, sensor coverage and network connectivity problems are caused by a limited detection range and the communication distance of the nodes. To solve the coverage and connectivity problems, many studies are suggested, but most research is restricted to apply into the real environment because they didn't consider various environmental factors on wireless sensor network deployment. So in this paper, we propose a node deployment strategy considering environmental factors and the number of nodes in surveillance and reconnaissance sensor networks(SRSN). The proposed node deployment method divides the installation of the surveillance and reconnaissance sensor networks system into four steps such as identification of influences factors for node placement through IPB process, sensor node deployment based on sensing range, selection of monitoring site, and relay node deployment based on RF communication range. And it deploys the sensor nodes and relay nodes considered the features of the surveillance and reconnaissance sensor network system and environmental factors. The result of simulation indicates that the proposed node deployment method improves sensor coverage and network connectivity.

• Journal of Periodontal and Implant Science
• /
• v.50 no.4
• /
• pp.260-267
• /
• 2020

Purpose: The aim of this study was to compare the prevalence, amount, and rate of supraeruption of the maxillary second molar according to sex, age, and history of periodontitis. Methods: Data were collected retrospectively from the charts and panoramic radiographs of 65 patients who were scheduled to undergo implant placement at the site of the mandibular second molar. The amount of supraeruption of the maxillary second molar and the alveolar bone level of the neighboring teeth were measured on digital panoramic radiographs. The prevalence was evaluated in each group, and univariate and multivariate logistic regression analyses were used to identify factors influencing the prevalence of supraeruption. The amount and the rate of supraeruption were compared between pairs of groups using the Mann-Whitney U test. For all tests, P values <0.05 were considered to indicate statistical significance. Results: Supraeruption occurred in 78% of the patients. The prevalence of supraeruption was affected by sex, age, and history of periodontitis. The mean amount of supraeruption was 0.91 mm and the mean rate of supraeruption was 0.14 mm/month. The amount and the rate of supraeruption showed no significant differences according to sex, age, or the distance from the cementoenamel junction to the alveolar bone crest (P>0.05). Conclusions: These results show that the amount of supraeruption on the maxillary second molar was similar to the thickness of the enamel on the occlusal surface. When a single implant is scheduled to be placed on the mandibular second molar, supraeruption of the antagonist should be considered.

• Journal of the Korean Institute of Rural Architecture
• /
• v.18 no.2
• /
• pp.55-62
• /
• 2016

The goal of this study is to recreate the identification of landscape image through the Agricultural Architecture in rural area. Most of them are not kept with houses in traditional village and the other structures in garden area of Korea, because they are located in the isolated field or placed near along the local street, are designed as a very heavily designed building, and are covered by different materials and color against village architecture. I researched cattle barns in both Korea and Germany of what they have had images in a distance-view points of local area, so that I might find a suitable image of Barn Architecture with topography of rural areas. I surveyed rural agricultural buildings with different point of views on landscape structure, architectural form and materials, and conditions animal welfare. There are three results from this paper as follows: First, the placement of animal barn in garden area is isolated to village so that it may keep a clean environment of village, which it makes non appropriate to land using and village view. Second, the architectural form makes a different image to the village building, because it has an oversize against houses in village or has no rhythm and dividing form of simple gable barm. Third, the barn architecture is better to consider of eco-friendly materials with animal welfare concept design, when it starts to design the barn in the field.