• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.124-124
• /
• 2017

• International Journal of Aeronautical and Space Sciences
• /
• 제18권3호
• /
• pp.498-511
• /
• 2017

This work conducts a validation study for loads analysis of the UH-60A slowed rotor at high advance ratios. The nonlinear flexible multibody dynamics analysis code, DYMORE II, is used with a freewake model for the rotorcraft comprehensive analysis. Wind tunnel test data of airloads and structural loads of a full-scale UH-60A slowed rotor are used for this validation study. This analysis predicts well the thrust reversal phenomenon at the advance ratio of 1.0. The section airloads such as normal forces and pitching moments and the oscillatory blade structural moments in this analysis are compared well or moderately with the measured data, although the higher harmonics components of blade torsion moments are not captured well. This validation study assesses the prediction accuracy and investigates the unique aeromechanics characteristics of a slowed rotor at high advance ratio.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권5호
• /
• pp.635-644
• /
• 2012

해양 파력 발전 시스템의 설계를 위하여 본 연구에서는 6-자유도운동해석 기법을 적용한 3차원 CFD 해석으로 단일 부유체에 대한 거동을 유입되는 파의 성질에 따라 해석하였다. 입력파는 한반도 제주도 서남해역 마라도인근 연평균 주기 5.5s, 진폭 0.57m로 가정하여 부유체 고유진도주기가 1.25~2.8s에서 총 12개를 모델링하였다. 생성된 파를 이용하여 동조율과 피치각 변화의 상호관계를 분석하고 부유체 질량관성모멘트, 각속도, 각가속도 등 변수와 최대 에너지 흡수 관계를 비교 분석하였다. 해석결과 부유체 L의 에너지흡수가 가장 높은 6kW인 결과를 확인하였고 에너지 흡수가 가장 높은 D, F, L 모델중 F모델이 최대 각도변화가 가장 높은 $1.91^{\circ}$이며 부유체 끝부분에서의 최대 변위는 L모델이 가장 높은 약 0.7m이다.

• 항공우주기술
• /
• 제4권1호
• /
• pp.39-44
• /
• 2005

로터의 성능 예측 검증을 위해 tilt rotor aeroacoustic model(TRAM)에 대한 3차원 CFD 해석을 수행하였고 로터 파워 효과에 의한 영향을 분석하기 위해 수치해석을 행하였다. 수치 기법은 multiple reference method(MRF)와 sliding mesh technique을 사용하였다. TRAM 실험치와 비교 결과 정지 비행시에는 수치해석이 실험보다 적은 추력을 예측하였고 전진 비행시에는 실험결과와 매우 유사한 결과를 예측하였다. 로터효과를 고려한 비행체의 양력은 감소하고 항력 및 피칭 모멘트는 거의 변화가 없는 것으로 판단된다.

• KSTLE International Journal
• /
• 제5권2호
• /
• pp.52-56
• /
• 2004

The hard disk drive performance depends strongly on air bearing characterisitcs of the head slider. The objective of the slider design is to provide accurate positioning of the magnetic read/write element at the very small height above the disk. Application of the numerical methods is required due to complexity of the air bearing surface of the slider. The Boundary-Fitted Coordinate System Divergence Formulation method can be used for calculation of pressure distribution in the case of steep film thickness gradients. In the present work, the interpolating functions used in the expression for the Couette flow are modified in order to improve the solution characteristics in the extremely high compressibility number region. The advantages of the modified method are demonstrated on example of the flat skewed slider. Finally, the modi.ed method is applied to analysis of the static characteristics of the femto-slider. The analysis results indicate the effect of the silder's air bearing surface crown on the flying height and the pitching angle in steady state position.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.858-860
• /
• 2000

Recently, optical pickup actuators have been designed to have structures that extruded lens to decrease their height, because they are used in very thin drive for notebook computers. However because of discordant and undesirable of forces that are supposed to happen in this design feature, subsidiary resonance such as rolling and pitching mode exert bad influence on actuator. In this paper, we presented force constituents to clarify the cause of subsidiary resonance analysis to evaluate characteristics of actuators. As a result. we could find out design parameters to diminish the influence of subsidiary resonance. Sample actuators designed with appropriate parameters were fabricated and put to practical tests. Comparing analysis with experimental results, we verified the accuracy of the analysis and the effectiveness of the method presented.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.618-625
• /
• 2011

This paper presents a double excited three degree-of-freedom (3DOF) motor. The proposed 3DOF motor is designed with a laminated structure, making it easy to manufacture. In addition, it has windings on the stator and rotor, and does not require an expensive permanent magnet. We explain the structure, principle of motion, and design of the proposed motor, and perform an analysis of the static characteristics using the two- and three-dimensional finite element methods (3D FEM). The feasibility of 3D FEM analysis is confirmed by comparing the 3D FEM analysis and experimental results for the rolling and pitching motion. We also confirm the occurrence of holding torque in every motion.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1580-1586
• /
• 2003

This paper presents the design and the analysis of a "fish-like underwater robot". In order to develop swimming robot like a real fish, extensive hydrodynamic analysis were made followed by the study of biology of the fishes especially its maneuverability and propel styles. Swimming mode is achieved by mimicking fish-swimming of carangiform. This is the swimming mode of the fast motion using its tail and peduncle for propulsion. In order to generate configurations of vortices that gives efficient propulsion yawing and surging with a caudal fin has applied and in order to submerge and maintain the body balance pitching and heaving motion with a pair of pectoral fin is used. We have derived the equation of motion of PoTuna by two methods. In first method, we use the equation of motion of underwater vehicle with the potential flow theory for the power of propulsion. In second method, we apply the method of the equation of motion of UVM(Underwater Vehicle-Manipulator). Then, we compare these results.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.206-209
• /
• 2011

During landing approach, an airplane could experience dynamic unstable motion by the combination of a gust and elevator control to cancel the disturbances. This situation is dangerous and could lead to a loss of an airplane. In this paper, numerical analysis was used to study the effect of pitch oscillating 2-D high lift devices in a landing condition. Experimental data on a pitching naca0012 airfoil was used for code validation. Dynamic characteristics of an airfoil, single slotted flap for mid-class passenger aircraft were analyzed. Unsteady Navier-Stokes analysis was performed with Spalart-Allmaras turbulence model for separation dominant low speed flow. As a result, flow hysteresis of a flapped airfoil was more complex than that of an oscillating airfoil. So, dynamic analysis of a flap in a landing condition is very important for operational safety.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.792-798
• /
• 2012

This study shows the vibration characteristics of an actuator with six wire-suspensions, used in optical pickups of optical disc drives (ODDs). In this paper, the vibration characteristics of this beam structure is induced mathematically. To obtain vibration modes of focusing direction, the vibration analysis is achieved in lateral and longitudinal directions of the structure. The accuracy of induced vibration characteristics is proved by comparing mode frequencies with a finite element analysis. Finally, it is shown that mode shapes can be modified by changing design parameters in mathematical expressions.