• Water for future
• /
• 제30권5호
• /
• pp.69-74
• /
• 1997

• ETRI Journal
• /
• 제27권5호
• /
• pp.533-538
• /
• 2005

We developed a pipelined scheduling technique of functional hardware and software modules for platform-based system-on-a-chip (SoC) designs. It is based on a modified list scheduling algorithm. We used the pipelined scheduling technique for a performance analysis of an MPEG4 video encoder application. Then, we applied it for architecture exploration to achieve a better performance. In our experiments, the modified SoC platform with 6 pipelines for the 32-bit dual layer architecture shows a 118% improvement in performance compared to the given basic SoC platform with 4 pipelines for the 16-bit single-layer architecture.

• Corrosion Science and Technology
• /
• 제12권2호
• /
• pp.79-84
• /
• 2013

In general, pipelines at nuclear power plants are affected by various types of degradation mechanisms and may be ruptured after gradually thinning. FAC (Flow-Accelerated Corrosion) is typical aging mechanism affecting the secondary side piping system. In Korea nuclear power plants, CHECWORKS program have been used for management of wall thinning damages. However, sometimes, CHECWORKS program shows wrong results at the stage of NFA (Network Flow Analysis) in case of complex pipelines. This paper describes the calculation results of pressure drop in a complex pipeline and single line by using the CHECWORKS program and the analysis results are compared with those of engineering calculation results including errors between them.

• Journal of Ocean Engineering and Technology
• /
• 제31권3호
• /
• pp.227-232
• /
• 2017

Subsea pipelines are one of the most important structures used to transport fluids such as oil and natural gas in offshore environments. The uplift behavior of the pipeline caused by earthquakes and buoyancy can result in a pipeline failure. The objective of this study is to examine the peak uplift resistance through parametric studies with numerical modeling by PLAXIS 3D Tunnel. The effects of the embedment ratio and pipe diameter were first examined for uplift resistance in sand and soft clay conditions. Then the length of geogrid layers and the number of geogrid layers were examined in terms of ability to resist uplift behavior.

• Ocean Systems Engineering
• /
• 제5권4호
• /
• pp.301-318
• /
• 2015

The present investigations introduce the shell-finite element discretization for the dynamics of slender marine pipelines. A long catenary pipeline, corresponding to a particular Steel Catenary Riser (SCR), is investigated under long-standing cyclic loading. The long structure is divided into smaller tubular parts which are discretized with 8-node planar shell elements. The transient analysis of each part is carried out by the implicit time integration scheme, within a Finite Elements (FE) solver. The time varying external loads and boundary conditions on each part are the results of a prior solution of an integrated line-dynamics model. The celebrated FE approximation can produce a more detailed stress distribution along the structural surface than the simplistic "line-dynamics" approach.

• Journal of Ocean Engineering and Technology
• /
• 제11권2호
• /
• pp.1-10
• /
• 1997

The interaction of ground ice features with underlying seabed is one of the major considerations in the design of Arctic pipeline systems. Regarding the development of offshore gas field near Sakhalin Island, which is an ice-infested area, in this paper an ice scour model to determine the burial depth of Arctic offshore pipeline is studied. Using a simplified ice-seabed interaction process, ice scour depth is easily estimated. This nonlinear numerical model can simulate the scouring process for various enviromental parameters such as ice mass, incoming velocity, soil strength. This study also deals with interaction forces during the scouring process in sloping seabed conditions and discusses the ice loads that are transmitted through the seabed soil.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• 제21권2호
• /
• pp.337-343
• /
• 2012

This work investigates the vibrational characteristics of the underground gas pipelines. Experiments were conducted to analyze the effects of various parameters on the vibrational characteristics from the emergency detection point of view. Influences of the various types of impact exerted on the pipe, height of free fall and measuring locations were analyzed. Especially, the difference between the vibrational signal generated by the direct impact on the pipe and the ambient noise was successfully identified. To validate the experimental observation, computer simulation was also performed with constant properties(elasticity, fluid velocity and internal pressure) which are directly conjectured from the accompanying experiment with a real pipe system.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제15권6호
• /
• pp.177-182
• /
• 2007

In this paper, automotive hydraulic pipeline systems are modeled in which a straight blocked pipe, two pipes with sudden expansion or contraction are connected in series and terminated with a chamber. The frequency response characteristics of these composite pipeline systems are investigated experimentally. The theoretical analysis for various pipe configurations is base on transfer matrix method with frequency dependent viscous friction distributed parameter pipeline model. The gain and phase of transfer functions are included for comparison with experimental results. There is close agreement between the results of experimental and theoretical determination of pressure response in automotive hydraulic pipeline systems.

• Journal of Ocean Engineering and Technology
• /
• 제17권2호
• /
• pp.21-26
• /
• 2003

The reel-lay method of submarine pipelines a continuous string of pipe coiled onto a reel. Assembly of this pipe that is string is accomplished onshore by welding, and nondestructive testing is carried out prior to coiling the pipe. The total length of pipes on the reel depends on the reel and pipe diameters. Pipeline installation is accomplished by uncoiling, straightening the pipe, and laying out the pipe string onto the seabed as the barge moves forward. Installation associated with coiling and uncoiling is related to the bending moment and strain relationship of the pipeline, A highgrade pipe material is required when the reel-lay method is used. This paper is concerned with the highly plastic bending moment of the pipeline, including the effect of ovality. Moment calculation in the pipe is accomplished by the numerical method, including the variable ovalities during the plastic bending of the pipe string. The new calculation method of the high plastic bending moment was applied to the reel-lay method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제32권3호
• /
• pp.223-231
• /
• 2008

This paper introduces a robot called the MRINSPECT V (Multifunctional Robotic crawler for Inpipe in-SPECTion V) for the inspection of pipelines with a nominal 8-in inside diameter. Based on the mechanism of the previous model MRINSPECT IV, we developed a new MRINSPECT V by using the differential driving mechanism, so that just simply controlling the speed of each driving units helps the robot to travel effectively inside the pipelines. Furthermore, the robot uses clutches in transmitting driving power to wheels. This clutch mechanism enables MRINSPECT V to select the suitable driving method according to the shape of pipeline. In this paper, the critical points in design and construction of the proposed robot are described with the preliminary results to provide good mobility and increase the efficiency.