경량화 소재 중 CFRP(Carbon Fiber Reinforced Plastic)는 카본 섬유를 이용한 섬유구조물이다. 카본과 플라스틱의 특성을 갖는 복합소재이다. 섬유구조는 섬유방향으로 큰 강도를 갖는다. 이러한 경량 소재인 CFRP로 가장 많이 사용되는 것은 직조된 CFRP이다. 직조된 CFRP는 단방향 CFRP에 비하여 구조가 안정적이기 때문이다. 단직조된 CFRP는 고가이다. 따라서 본 연구는 단방향 CFRP의 섬유 구조 특성을 파악하고자 하였다. 본 연구에서는 적층각도 [0/X/-X/0]로 X를 변수로 갖는다. X의 각도 위상이 반전되어 적층된 단방향 CFRP이다. 이러한 단방향 CFRP를 이용하여 중앙 크랙을 갖는 두께 2 mm 판재 형태의 해석 모델을 이용하였다. 해석에서는 핀으로 연결된 상부와 하부에서 하중이 가해지고 있으며 중앙 크랙부분에서 파단을 연구한다. 해석 모델은 CATIA를 이용한 3D Surface 모델로 설계하였다. CFRP 적층을 위해, ANSYS프로그램에서 ACP를 이용한 적층 방향을 결정하여 2개의 적층들을 갖는 해석 모델을 만들었다. 이후 구조해석을 진행하였다.
Jo, Youn Sook;Park, Hye Bin;Kim, Ji Yun;Choi, Seong Min;Lee, Da Sol;Kim, Do Hoon;Lee, Young Hee;Park, Chang-Jin;Jeun, Yong-Chull;Hong, Jeum Kyu
The Plant Pathology Journal
/
제36권4호
/
pp.335-345
/
2020
Tomato grey mould has been one of the destructive fungal diseases during tomato production. Ten mM of menadione sodium bisulfite (MSB) was applied to tomato plants for eco-friendly control of the grey mould. MSB-reduced tomato grey mould in the 3rd true leaves was prolonged at least 7 days prior to the fungal inoculation of two inoculum densities (2 × 104 and 2 × 105 conidia/ml) of Botrytis cinerea. Protection efficacy was significantly higher in the leaves inoculated with the lower disease pressure of conidial suspension compared to the higher one. MSB-pretreatment was not effective to arrest oxalic acid-triggered necrosis on tomato leaves. Plant cell death and hydrogen peroxide accumulation were restricted in necrotic lesions of the B. cinereainoculated leaves by the MSB-pretreatment. Decreased conidia number and germ-tube elongation of B. cinerea were found at 10 h, and mycelial growth was also impeded at 24 h on the MSB-pretreated leaves. MSB-mediated disease suppressions were found in cotyledons and different positions (1st to 5th) of true leaves inoculated with the lower conidial suspension, but only 1st to 3rd true leaves showed decreases in lesion sizes by the higher inoculum density. Increasing MSB-pretreatment times more efficiently decreased the lesion size by the higher disease pressure. MSB led to inducible expressions of defence-related genes SlPR1a, SlPR1b, SlPIN2, SlACO1, SlChi3, and SlChi9 in tomato leaves prior to B. cinerea infection. These results suggest that MSB pretreatment can be a promising alternative to chemical fungicides for environment-friendly management of tomato grey mould.
레이저 다이오드와 수신광검출기가 집적된 소자를 V-홈을 가진 실리콘 광학벤치에 flip-chip 본딩하고, 경사면을 가진 하나의 단일모드 광섬유와 수동정렬하는 방법을 사용하여 가입자망을 위한 저가의 양방향 송수신 모듈을 설계, 제작하였다. 광섬유의 단면 경사각에 따른 송신광결합 효율과 수신광결합 효율사이의 병목점을 찾기 위해 Gaussian빔 모델을 사용하여 수평정렬거리, 광섬유 단면 경사각, 수직정렬오차등의 변수에 따른 광결합계수를 계산함으로써, 최적의 광정렬조건을 예측하였다. 또한 실리콘 광학벤치에서 광결합효율을 측정하여 광섬유의 수직정렬오차에 따른 광결합계수의 감소가 광섬유의 경사각에 의해 보상될 수 있다는 계산결과의 타당함을 확인하였다. 실제의 sub-module 제작 및 광결합 실험에서 송신빔이 광섬유 단면에 반사되어 PD로 입사되는 것을 최소화하기 위하여 광섬유 단면을 경사절두원추형으로 제작함으로써 PD의 수신 잡음을 $30mu$m 이상의 정렬거리에서 -35dB이하로 유지할 수 있었다. 같은 조건에서 단면 경사각이 $12^{\circ}$인 광섬유에 의해 -12.1dB의 송신출력과 0.2A/W의 responsivity를 얻을 수 있었다.
본 논문에서는 FPGA를 이용하여 산업용 구동장치로 널리 사용되고 있는 유도 전동기의 디지털 전류 제어시스템을 구현하였다. 이를 위해 VHDL을 이용하여 FPGA를 설계하였으며 이 FPGA는 PWM 발생부, PWM 보호부, 회전속도 검출부, 프로그램 폭주 방지부, 인터럽트 발생부, 디코더 로직부, 신호 지연 발생부 및 디지털 입·출력부로 각각 구성되어있다. 본 FPGA의 설계시 고속처리의 문제점을 해결하기 위해 클럭전용핀을 활용하였으며 또한 40 MHz에서도 동작할 수 있는 삼각파를 만들기 위해 업다운 카운터와 래치부를 병렬 처리함으로써 고속화하였다. 특히 삼각파와 각종 레지스터를 비교 연산할 때 많은 팬아웃 문제에 따른 게이트 지연(gate delay) 요소를 줄이기 위해 병렬 카운터를 두어 고속화를 실현하였다. 아울러 삼각파의 진폭과 주파수 및 PWM 파형의 데드 타임 등을 소프트웨어적으로 가변 하도록 하였다. 이와 같은 기능들을 FPGA로 구현하기 위하여 퀵로직(Quick Logic)사의 pASIC 2 SpDE와 Synplify-Lite 합성툴을 이용하여 로직을 합성하였다. 또한 Verilog HDL 환경에서 최악의 상황들(worst cases)에 대한 최종 시뮬레이션이 성공적으로 수행되었다. 아울러 구현된 FPGA를 84핀 PLCC 형태의 FPGA로 프로그래밍 한 후 3상 유도전동기의 디지털 전류 제어 시스템에 적용하였다. 이를 위해 DSP(TMS320C31-40 MHz)와 FPGA, A/D 변환기 및 전류 변환기(Hall CT) 등을 이용하여 3상 유도 전동기의 디지털 전류 제어 시스템을 구성하였으며, 디지털 전류 제어의 효용성을 실험을 통해 확인하였다.
Introduction: Prostate cancer in Indonesia is the $3^{rd}$ ranking cancer among males and the $5^{th}$ rank for their cancer mortality. Prognostic markers that can identify aggressive prostate cancer in early stages and help select appropriate therapy to finally reduce the mortality are therefore urgently needed. It has been suggested that stem cells in the prostate gland have a role in initiation, progression, and metastasis of cancer, although controversy continues to exist. Maintenance of normal stem cell or reserve cell populations in several epithelia including prostate has been shown to be regulated by p63 and alteration of p63 expression is considered to have an oncogenic role in prostate cancer. We hypothesize that the expression of cytoplasmic aberrance of p63 is associated with high ALDH1A1 expression as a cancer stem cell marker, thus leading to progression of prostate cancer. Methods: Using a cross-sectional study during two years (2009-2010), a total of 79 paraffin embedded tissues of benign prostatic hyperplasia, PIN prostatic intraepithelial neoplasia, low and high Gleason score prostate cancer were investigated using immunohistochemistry. Associations between cytoplasmic p63 and ALDH1A1, as well as with pathological diagnosis, were analyzed by Chi-Square test using SPSS 15.0. Links of both markers with cell proliferation rate (KI-67) and apoptotic rate (cleaved caspase 3) were also analyzed by Kruskal-Wallis test. Results: The mean age of patient at the diagnosis is 70.0 years. Cytoplasmic aberrance of p63 was associated with ALDH1A1 expression (p<0.001) and both were found to have significant relationships with pathological diagnosis (including Gleason score), (p=0.006 and p<0.001 respectively). Moreover, it was also found that higher levels of cytoplasmic p63 were significantly associated with the frequency of proliferating cells and cells undergoing apoptosis in prostate cancers (p=0.001 and p=0.016 respectively). Conclusion: p63 cytoplasmic aberrance is associated with high ALDH1A1 expression. These components are suggested to have an important role in prostate cancer progression and may be used as molecular markers.
증자한 탈지대두 grits에 B. subtilis NUCI을 2% 접종하여 $40^{\circ}C$에서 24시간 발효하여 DSG 발효물을 제조하였다. 제조한 DSG 발효물 및 DSG의 단백질 함량은 $57.2{\sim}61.0%$로 청국장보다 높았으며, 지질은 함유하지 않았다. 그리고 DSG에서는 protease 및 $\alpha$-amylase의 활성이 없었으며, 점질물도 검출되지 않았으나, DSG 발효물은 청국장보다 더 큰 protease 활성, $\alpha$-amylase 활성, tyrosine 함량, 점질물 함량을 보였다. 또한 DSG 발효물은 DSG보다 유리아미노산 함량이 증가하는 경향이었고, phenylalanine, tyrosine, glutamic acid 등이 주된 유리아미노산으로 확인되었다. 그리고 isoflavone 함량도 DSG 발효물이 DSG보다 1.6배 더 증가되었다. 관능검사에서는 냄새 및 맛에 대한 기호도의 경우 DSG 발효물이 청국장보다 높은 값을 보여 DSG 발효물의 기호도가 더 좋은 것으로 나타났으나, 종합적인 기호도는 청국장이 DSG 발효물보다 조금 높게 나타났지만 큰 차이는 보이지 않았다.
당근주스에서 분리된 $Ln.$$mesenteroides$ SM 균주와 효모 추출물 첨가 농도에 따라 생산된 덱스트란 함유 발효물의 물리, 화학적 성질을 평가하였으며, 식이섬유 HPMC 첨가에 따른 발효물의 물성을 조절하였다. Sucrose를 포함한 제한배지에 효모 추출물을 0.5% 이상 첨가 시 sucrose 전환율이 급격히 증가되었으며 3% 농도증가에 따라 전환율이 90%까지 증가하였으며 점조도 값은 $37.6\;Pa{\cdot}s^n$으로 가장 높은 값을 나타내었다. 발효물의 산생성은 발효온도 25, $30^{\circ}C$에서 24시간 이후 최고 산도 값 1.4% 이상을 나타냈으며, 낮은 발효온도에서는 1.0% 수준으로 낮은 값을 보였다. 기본 제한배지에 효모 추출물을 3% 수준으로 첨가하여 $30^{\circ}C$에서 24시간 동안 발효했을 때, 발효물의 점성과 탄성 값이 각각 약 40과 50 Pa로 가장 높게 나타났으며, 불용성 덱스트란과 전체 덱스트란의 생산량이 가장 높았다. 식이섬유 HPMC의 점도가 400, 4,000 cp인 경우에 덱스트란 함유 발효물은 높은 점탄성 값을 보였으며, 첨가 농도가 증가할수록 점탄성 값이 크게 증가되었다. 또한 HPMC가 강화된 덱스트란 함유 발효물의 견고성을 포함한 firmness는 HPMC 첨가 농도 증가 및 점도가 높을수록 급격하게 증가하면서 점탄성이 높은 겔을 형성하였다. 결론적으로 식물성 젖산균 $Ln.$$mesenteroides$ SM 균주를 이용하여 효모 추출물을 고농도로 첨가하여 24시간 발효를 통해서 점조성이 높고, 산도가 적절한 겔 형태의 발효물을 생산할 수 있으며, 식이섬유인 HPMC의 혼합에 따라 덱스트란 함유 발효물의 견고성, firmness등의 조절이 가능하며 점탄성이 급격하게 증가된 겔을 형성할 수 있었다. 따라서 덱스트란 함유 젖산균 발효물은 수용성 식이섬유 HPMC의 강화에 따라 probiotic 및 prebiotic을 포함하면서 점조도 및 점탄성이 증진되어 식품의 물성개량제 등으로 활용할 수 있을 것으로 기대된다.
Dental porcelain is one of the materials of choice for restoration where esthetics is of concern, but has a considerable potentials of wear. The wear of enamel is variable when opposed by different porcelain systems and surface conditions, and the exposed dentine and opaque porcelain due to clinical failure is expected to have high potentials of wear. The purpose of this study was to investigate the wear effects of self-glazed, polished incisal porcelain. polished dentine and opaque porcelain against human enamel in the laboratory by use of a pin-on-disk type wear tester. 4 types of dental porcelain($Vita-{\Omega}$, Ceramco-II, Vintage powder $Vita-{\alpha}$ of In-Ceram system) and type IV gold alloy as cotrol group were used for test specimens. Intact buccal cusps of maxillary premolar were used for enamel specimens, and the cusp converged to a point and was devoid of visible abrasion, caries, decalcification. The upper part was the cusp of a maxillary premolar and the lower part was a porcelain specimen. The enamel wear was deter-mined by weighing the cusp before and after each test. Surface profilometer was used to quantitate wear of the porcelain specimens. Vicker's hardness tester was used to evaluate the surface hardness of test specimens. The SEM was used to evaluate the wear surfaces. The results were as follows : 1 Self-glazed porcelain produced more enamel wear than polished porcelain, especially the enamel wear of $Vita-{\alpha}$ self-glazed porcelain was 3.2 times more than that of other groups. 2. Opaque porcelain produced least porcelain wear, $Vita-{\alpha}$ self-glazed porcelain produce greatest porcelain wear, but there was no statistically significant difference between the groups(p>0.05). 3. The enamel wear of dentine porcelain was 3.8 times more than that of polished inisal porcelain(p<0.05), and the enamel wear of opaque porcelain was 1.9 times more than that of polished inisal porcelain, but there was no statistically significant difference between the groups(p>0.05) 4. Overglazed porcelain produced less enamel wear than self-glazed porcelain, and more enamel wear than polished porcelain, but there was no statistically significant difference between the groups(P>0.05). 5. The hardness number of $Vita-{\Omega}$ dentine and Ceramco-II opaque porcelain was larger, but that of Vintage dentine and $Vita-{\alpha}$ self-glazed porcelain was similar to other groups. 6. Examination of SEM photographs revealed that overglazed porcelain had smoother surface than self-glazed porcelain, and self-glazed porcelain had smoother surface than polished porcelain. Much polishing scratches and larger porosities were observed on the opaque porcelain specimen, and much polishing scratchess and small porosities were observed on the dentine porcelain specimen.
Lee, Jun Ho;Shin, Sunmy;Park, Gyu Nam;Rhee, Hyug-Gyo;Yang, Ho-Soon
Current Optics and Photonics
/
제1권2호
/
pp.107-112
/
2017
An adaptive optics system can be simulated or analyzed to predict its closed-loop performance. However, this type of prediction based on various assumptions can occasionally produce outcomes which are far from actual experience. Thus, every adaptive optics system is desired to be tested in a closed loop on an optical test bench before its application to a telescope. In the close-loop test bench, we need an atmospheric simulator that simulates atmospheric disturbances, mostly in phase, in terms of spatial and temporal behavior. We report the development of an atmospheric turbulence simulator consisting of two point sources, a commercially available deformable mirror with a $12{\times}12$ actuator array, and two random phase plates. The simulator generates an atmospherically distorted single or binary star with varying stellar magnitudes and angular separations. We conduct a simulation of a binary star by optically combining two point sources mounted on independent precision stages. The light intensity of each source (an LED with a pin hole) is adjustable to the corresponding stellar magnitude, while its angular separation is precisely adjusted by moving the corresponding stage. First, the atmospheric phase disturbance at a single instance, i.e., a phase screen, is generated via a computer simulation based on the thin-layer Kolmogorov atmospheric model and its temporal evolution is predicted based on the frozen flow hypothesis. The deformable mirror is then continuously best-fitted to the time-sequenced phase screens based on the least square method. Similarly, we also implement another simulation by rotating two random phase plates which were manufactured to have atmospheric-disturbance-like residual aberrations. This later method is limited in its ability to simulate atmospheric disturbances, but it is easy and inexpensive to implement. With these two methods, individually or in unison, we can simulate typical atmospheric disturbances observed at the Bohyun Observatory in South Korea, which corresponds to an area from 7 to 15 cm with regard to the Fried parameter at a telescope pupil plane of 500 nm.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.