• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.4
• /
• pp.346-351
• /
• 1997

The pin bearing strength is one of the most important design parameters for mechanical joints composed of fiber reinforced composites. Thus the effect of the edge distance and the width of specimen on the pin-bearing strength of unidirectional CFRP composites were experimentally investigated in this paper. As results, the failure modes and the pin bearing strength of mechanical joints turned out to depend on the edge distance and also the width of specimen. The failure of specimen with low ratio of width to hole diameter was caused by the net tension from the hole boundary, on the other hand, the failure of specimen with low ratio of edge distance to hole diameter was caused by the shear-out. The bearing strength in case of the failure by shear-out was quite lower than that in case of failure by net tension.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.741-744
• /
• 2009

In this paper, We introduce the glove mouse using a Gyroscope, acceleration sensor, Pin-type Viboratctile Display Device and USB HID. The device recognize a user's wrist by Gyroscope and acceleration sensor in the glove and transmit the data to USB dongle which is recognized the manufactured mouse by Blutooth. Also, using a special application, We transmit the tactile information to user through the Pin-type Vibrotactile Display. We implement wearable system in the glove except USB device. If user want to use general spatial mouse, we recognize mouse USB dongle only without another application. If user want to feel the tactile sensationn, we can use by connecting PC serial communication port to USB dongle.

• Journal of information and communication convergence engineering
• /
• v.15 no.2
• /
• pp.91-96
• /
• 2017

PIN-entry interfaces have high risks to leak secret values if the malicious attackers perform shoulder-surfing attacks with advanced monitoring and observation devices. To make the PIN-entry secure, many studies have considered invisible radio channels as a secure medium to deliver private information. However, the methods are also vulnerable if the malicious adversaries find a hint of secret values from user's $na{\ddot{i}}ve$ gestures. In this paper, we revisit the state-of-art radio channel based bimodal PIN-entry method and analyze the information leakage from the previous method by exploiting the sight tracking attacks. The proposed sight tracking attack technique significantly reduces the original password complexities by 93.8% after post-processing. To keep the security level strong, we introduce the advanced bimodal PIN-entry technique. The new technique delivers the secret indicator information through a secure radio channel and the smartphone screen only displays the multiple indicator options without corresponding numbers. Afterwards, the users select the target value by following the circular layout. The method completely hides the password and is secure against the advanced shoulder-surfing attacks.

• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.797-806
• /
• 2009

The Multichannel Analyzer for Transient and steady-state in Rod Array - Liquid Metal Reactor for Flow Blockage analysis (MATRA-LMR-FB) code for the analysis of a subchannel blockage has been developed and evaluated through several experiments. The current version of the code is improved here by the implementation of a distributed resistance model which accurately considers the effect of flow resistance on wire spacers, by the addition of a turbulent mixing model, and by the application of a hybrid scheme for low flow regions. Validation calculations for the MATRA-LMR-FB code were performed for Oak Ridge National Laboratory (ORNL) 19-pin tests with wire spacers and Karlsruhe 169-pin tests with grid spacers. The analysis of the ORNL 19-pin tests conducted using the code reveals that the code has sufficient predictive accuracy, within a range of 5 $^{\circ}C$, for the experimental data with a blockage. As for the results of the analyses, the standard deviation for the Karlsruhe 169-pin tests, 0.316, was larger than the standard deviation for the ORNL 19-pin tests, 0.047.

• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.9-15
• /
• 2004

The flexural strength from 3-point bend test and fatigue properties were measured to evaluate mechanical properties of metal/ceramic interface of the multilayer ceramic package produced through tape casting. From the results, the specimens with three electrode layers showed the highest strength. The temperature distribution with time during thermal cycle and thermal stresses with the change of electrode's shape have been estimated by mathematical modelling. Specimen affected by thermal shock, produced microcracks by the difference of thermal expansion coefficient. The results of tensile test and fatigue test showed the rupture at pin. The fact that the pin brazed specimens were always fractured at the pin proved the good bonding condition between pin and electrode.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.221-224
• /
• 2009

In this paper, we deal with the development of an optimal design program for a dual-band of 0.92 GHz and 2.45 GHz with shorting pin and slot by using evolution strategy. the optimal shorting pin, coaxial feed and H-shaped patch are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The resonance frequencies of the dual-band antenna yielded by the optimal design program are 0.92 GHz and 2.45 GHz that show a good agreement to the design target values.

• Korean Journal of Microbiology
• /
• v.31 no.2
• /
• pp.166-174
• /
• 1993

Streptomyces coeUc%r (Muller) cells were treated with $100 \mu$M hydrogen peroxide for I hour and proteins synthesized during hydrogen peroxide stress were labeled with L-[$^{35}S$]-methionine. Total cellular proteins were extracted and analyzed by two-dimensional polyacrylamide gel electrophoresis. In exponential growth phase, synthesis of about 100 proteins was increased by hydrogen peroxide treatment. These proteins were named as Pin (£eroxide-inducib]e) proteins and classified into 4 subgroups according to their induction time after hydrogen peroxide treatment. About 60 of them were found to be induced within 20 minutes and maintained throughout I hour of treatment. In stationary growth phase. synthesis of 62 proteins was increased by hydrogen peroxide and 21 of them were the same Pins found in exponential growth phase. Proteins from the mutants which are resistant to hydrogen peroxide were obtained in exponential growth phase and compared with those from the wild type on two-dimensional gel. The three mutants, N7, N9. and N24, were found to have higher constitutive leve]s of ]5, 17, and 15 Pin proteins respectively, than the wild type. 9 of these Pin proteins (D74.7a, E76.0c, E23.3. F50.7, F47.2a. F25.5, G39.6b, G24.0, H39.6a) increased in two of the three mutants and 3 proteins (F39.7, H6I.7. 120.8) increased in all of the three mutants. These proteins might play important roles in the response of S. coelic%r to hydrogen peroxide.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.7
• /
• pp.703-714
• /
• 2010

This paper describes the design optimization of a rotating rectangular channel with staggered arrays of pin-fins by Kriging metamodeling technique. Two non-dimensional variables, the ratio of the height to the diameter of the pin-fins and the ratio of the spacing between the pin-fins to the diameter of the pin-fins are chosen as the design variables. The objective function that is a linear combination of heat transfer and friction loss related terms with a weighting factor is selected for the optimization. To construct the Kriging model, objective function values at 20 training points generated by Latin hypercube sampling are evaluated by a three-dimensional Reynolds-averaged Navier-Stokes (RANS) analysis method with the SST turbulence model. The Kriging model predicts the objective function value that agrees well with the value calculated by the RANS analysis at the optimum point. The objective function is reduced by 11% by the optimization of the channel.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.3
• /
• pp.245-251
• /
• 2015

In an electrical reliability test of a printed circuit board (PCB), the impact of the micro probing pins on the PCB needs to be checked to ascertain the quality of the circuit. In this study, the impact of the dynamic movement of the probing pin on the pad was observed. As a misaligned pin can exert horizontal force on the pad of the PCB, this study focused on the behavior of a misaligned probing pin. The parameters of observation were the circular and flat edges of the probing pin. The effects of the speed of movement, diameter, and the length of projection of the probing pin were also investigated. The results demonstrated that slippage angle is strongly affected by the shape of the edge of the probing pin, and that projection length is an important factor affecting pin slippage. In contrast, the speed of movement of the probing pin was able to double the slippage angle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1352-1358
• /
• 2004

The mechanical spring is one of widely used machine elements. Among various kinds, flat-type spring loaded by a rotating pin was studied. A flat spring was simplified to a cantilever beam, and numerical analysis was attempted. Since the loading pin rotates about a separate axis from the fixed spring or vice versa, the location, direction, and magnitude of the contact force including normal contact and friction loads vary accordingly. Meanwhile, the spring is deformed substantially as the relative motion progresses. Therefore, this problem needs to be formulated taking the follower loading characteristics and geometrical non-linearity into account. Derived nonlinear differential equation was solved to yield the spring deflection, contact force and the torque to rotate the pin, and the result was compared with a finite element solution. Also, the influences of principal design parameters were studied. The proposed methodology is expected to be useful for the design of pin-loaded flat spring and the prevention of mechanical failures in the form of yielding or fatigue failure of spring or severe wear of the components.