References
- Mohammad Al-Qahtani, Yong-Jun Janh, Hamn-Chingand Je-Chin Han, 2002, "Flow and Heat Transfer inRotating Two-Pass Rectangular Channels (AR=2) byReynolds Stress Turbulence Model," InternationalJournal of Heat and Mass Transfer, Vol. 45, pp.1823-1838. https://doi.org/10.1016/S0017-9310(01)00292-7
- Joon Sang Lee, Ning Meng, Richard H. Pletcherand Yang Liu, 2004, "Numerical Study of theEffects of Rotation on the Heat Transfer inChannels with and without Ribs," InternationalJournal of Heat and Mass Transfer, Vol. 47, pp.4673-4684. https://doi.org/10.1016/j.ijheatmasstransfer.2004.06.006
- Akira Murata and Sadanari Mochizuki, 2000,"Large Eddy Simulation with a DynamicSubgrid-Scale Model of Turbulent Heat Transfer inan Orthogonally Rotating Rectangular Duct withTransverse Rib Turbulators," International of Heatand Mass Transfer, Vol. 47, pp. 1243-1259.
- Michael Huh, Jiang Lei, Yao-Hsien Liu andJe-Chin Han, 2009, "High Rotation Number Effectson Heat Transfer in a Rectangular (AR=2:1) TwoPass Channel," Proceedings of ASME Turbo Expo2009, Orlando, Florida, USA, GT-2009-59421.
- Nobari, M.R.H., Nousha, A. and Damangir, E.,2009, "A Numerical Investigation of Flow and HeatTransfer in Rotating U-Shaped Square Ducts,"International Journal of Thermal Science, Vol. 48,pp. 590-601. https://doi.org/10.1016/j.ijthermalsci.2008.04.001
- Guoguang Su, Hamn-Ching Chen, Je-Chin Hanand James D. Heidmann, 2007, "Computation ofFlow and Heat Transfer in Rotating Two-PassRectangular Channels (AR=1:1, 1:2, and 1:4) withSmooth Walls by a Reynolds Stress TurbulenceModel," International Journal of Heat and MassTransfer, Vol. 47, pp. 5665-5683. https://doi.org/10.1016/j.ijheatmasstransfer.2004.07.019
-
Luai Al-Hadhrami and Je-Chin Han, 2003, "Effectof Rotating on Heat Transfer in Two-Pass SquareChannels with Five Different Orientations of
$45^{\circ}$ Angled Rib Turbulators," International Journal ofHeat and Mass Transfer, Vol. 46, pp. 653-669.T. -
Liou, T. M., Chang, S. W., Hung, J. H. andChiou, S. F., 2007, "High Rotation Number HeatTransfer of a
$45^{\circ}$ ib-Roughened Rectangular Ductwith Two Channel Orientations," InternationalJournal of Heat and Mass Transfer, Vol. 50, pp.4063-4078. https://doi.org/10.1016/j.ijheatmasstransfer.2007.01.060 - Liou, T. M., Chang, S. W., Chen, J. S., Yang, T.L. and Yi-An Lan, 2009, "Influence of ChannelAspect Ratio on Heat Transfer in RotatingRectangular Ducts with Skewed Ribs at HighRotation Numbers," International Journal of Heatand Mass Transfer, Vol. 42, pp. 5309-5322.
-
Tong-Miin Liou, Meng-Yu Chen and Yu-MingWang, 2002, "Heat Transfer, Fluid Flow, andPressure Measurements inside a Rotating Two-PassDuct with Detached
$90^{\circ}$ Ribs," Proceedings ofASME Turbo Expo 2002, Amsterdam, Netherlands,GT-2002-30201. - Michael Huh, Yao-Hsein Liu and Je-Chin Han,2009, "Effect of Rib Height on Heat Transfer in aTwo Pass Rectangular Channel (AR=1:4) with aSharp Entrance at High Rotating Numbers,"International Journal of Heat and Mass Transfer,Vol. 52, pp. 4635-4649. https://doi.org/10.1016/j.ijheatmasstransfer.2009.03.021
-
Mohammad Al-Qahtani, Hamn-Ching Chen andJe-Chin Han, 2002, "A Numerical Study of Flowand Heat Transfer in Rotation Rectangular Channels(AR=4) with
$45^{\circ}$ Rib Turbulators by Reynolds StressTurbulence Model," Proceedings of ASME TurboExpo, Amsterdam, The Netherlands, GT-2002-30216. - Mohammad S. Al-Qahtani and Mehaboob Basha,2007, "Flow and Heat Transfer Prediction inRotating Rectangular Pin-Fin Channels (AR=10:1),"Journal of Thermophysics and Heat Transfer, Vol.21, No. 4, pp. 744-753. https://doi.org/10.2514/1.25580
- Shyy Woei Chang, Tsun Lirng Yang, Tong-MiinLiou and Hong Guo Fang, 2009, "Heat Transfer inRotating Scale-Roughened Trapezoidal Duct at HighRotation Numbers," Applied Thermal Engineering,Vol. 29, pp. 1682-1693. https://doi.org/10.1016/j.applthermaleng.2008.07.024
- Hector Iacovides, Diamantis Kounadis andZeyuan Xu, 2009, "Experimental Study of ThermalDevelopment in a Rotating Square-Ended U-Bend,"Experimental Thermal and Fluid Science, Vol. 33,pp. 482-494. https://doi.org/10.1016/j.expthermflusci.2008.11.010
- Fred T. Willett and Arthur E. Bergles, 2002,"Heat Transfer in Rotating Narrow RectangularPin-Fin Ducts," Experimental Thermal and FluidScience, Vol. 25, pp. 573-582. https://doi.org/10.1016/S0894-1777(01)00103-0
- Jun Su Park, Kyung Min Kim, Dong Hyun Lee,Hyung Hee Cho and Minking Chyu, 2009, "HeatTransfer in Rotating Channel with InclinedPin-Fins," Proceedings of ASME Turbo Expo,Orlando, Florida, USA, GT-2009-59741.
- Sacks, J., Welch, W. J., Mitchell, T. J. andWynn, H. P., 1989, "Design and Analysis ofComputer Experiments," Statical Science, Vol. 4,pp. 409-435. https://doi.org/10.1214/ss/1177012413
-
$JMP{\circledR}$ 5.1, 2004, SAS Institute, Inc., - Ansys CFX-11.0, 2006, Ansys Inc.,
- Menter, F. F., 1994, "Two-Equation Eddy-ViscosityTurbulence Models for Engineering Applications,"AIAA Journal, Vol. 32, pp. 1598-1605. https://doi.org/10.2514/3.12149
- Bardina, J. E., Huang, P. G. and Coakley, T.,1997, "Turbulence Modeling Validation," AIAAJournal, pp. 1997-2121.
- Lesley M. Wright, Eungsuk Lee and Je-ChinHan, 2003, "Effect of Rotation on Heat Transfer inNarrow Rectangular Cooling Channels (AR=8:1 and4:1) with Pin-Fins," Proceedings of ASME TurboExpo, Atlanta, Georgia, USA, GT-2003-38340.
- Gee, D. L. and Webb, R. L., 1980, "ForcedConvection Heat Transfer in Helically Rib-RoughenedTubes," International Journal of Heat and MassTransfer, Vol. 23, pp. 1127-1136. https://doi.org/10.1016/0017-9310(80)90177-5
- Kwang-Yong Kim and Mi-Ae Moon, 2009,"Optimization of a Stepped Circular Pin-Fin Arrayto Enhance Heat Transfer Performance," Heat MassTransfer, Vol. 46, pp. 63-74. https://doi.org/10.1007/s00231-009-0544-3
-
Shyy Woel Chang, Tong-Minn Liou, Wen-HsienYeh and Jui-Hung Hung, 2006, "Heat Transfer in aRadially Rotating Square-Sectioned Duct with TwoOpposite Walls Roughened by
$45^{\circ}$ Staggered Ribs,"Proceeding of ASME Turbo Expo, Barcelona, Spain,GT-2006-90153.