• Journal of the Korean Wood Science and Technology
• /
• 제42권3호
• /
• pp.258-265
• /
• 2014

목구조물 접합부에 기존 드리프트핀(Drift pin)을 대체하고자 단판이나 합판을 유리섬유강화플라스틱(GFRP: Glass fiber reinforced plastic)과 복합 적층시킨 GFRP보강적층목재핀을 제작하였다. 더불어 GFRP보강적층목재핀을 사용하여 집성재 접합부의 인장형 전단내력 시험을 실시하였다. GFRP 배열에 따른 보강적층목재핀의 휨강도 시험결과 GFRP를 각층에 1장씩 삽입한 시험편(Type-A)이 가장 양호한 성능을 발휘하였다. 또한 압체압력 $1.96N/mm^2$, 온도 $150^{\circ}C$에서 한 시간 열압하여 고밀화한 시험편이 고밀화하지 않은 시험편과 비교하여 휨강도 성능이 1.57배 향상됨을 확인하였으며, 하중방향에 따라 Edgewise가 Flatwise보다 3.51배 높은 성능을 발휘하였다. 시험을 통해 가장 양호한 성능을 보인 Type-A 보강적층목재핀을 이용하여 전단내력 시험을 실시하였다. 접합구의 종류와 접합판의 종류를 달리하여 시험한 결과 드리프트핀과 강판을 적용한 시험체(Type-DS)와 비교하여 GFRP보강적층목재핀과 GFRP보강목재적층판을 적용한 시험체(Type-WL)가 1.12배 높은 전단내력이 측정되었으며 최대하중 이후에도 매우 양호한 인성이 관찰되었다.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제10권11호
• /
• pp.297-304
• /
• 2021

상용 난독화 도구(프로텍터)들은 소프트웨어 역공학 과정에서 프로그램의 분석을 지연시키고 방해하는 난독화 기술 및 역공학 방해(안티리버싱) 기법을 적용시킴으로써 소프트웨어의 동작 과정을 분석하는데 어려움을 발생시키는데 목적이 있다. 특히, 가상화 탐지와 안티디버깅 기능 같은 경우 분석 도구가 발견되면 정상적인 실행 흐름을 벗어나 프로그램을 종료시킨다. 본 논문에서는 상용 난독화 도구(프로텍터) 중 하나인 VMProtect 3.5.0을 통해 Debugger Detection, Virualization Tools Detection 옵션을 적용시킨 실행 파일의 안티리버싱 기법을 분석하고 Pin을 이용한 우회 방안을 제안한다. 또한, 적용된 안티리버싱 기법을 분석하는 과정에서 Amti-VM 기술과 Anti-DBI 기술에 의해 프로그램이 종료되는 문제가 발생하기 때문에 API 분석을 통해 특정 프로그램 종료 루틴을 알아내어 적용된 안티리버싱 기법의 위치를 예상하고 위치를 바탕으로 안티리버싱 기법 우회 방안 알고리즘 순서도를 작성하였다. 실험에 사용된 소프트웨어들의 버전의 차이로부터 발생하는 호환성 문제, 기법의 변화 등을 고려하여 최신 버전의 소프트웨어(VMProtect, Windows, Pin)에서 Pin 자동화 우회 코드를 작성하고 실험을 진행하여 성공적으로 우회됨을 확인하였다. 제안된 분석 방안을 개선하여 기법이 제시되지 않은 난독화 도구의 안티리버싱 기법을 분석하고 우회 방안을 찾아낼 수 있다.

• 한국전기전자재료학회논문지
• /
• 제36권4호
• /
• pp.362-368
• /
• 2023

Multilayered actuators using Pb(Mg_1/3Nb_2/3)O₃-Pb(In_1/2Nb_1/2)O₃-PbTiO₃ (PMN-PIN-PT) crystals have demonstrated excellent properties, but are costly and lack mechanical strength. Textured PMN-PIN-PT ceramics exhibit robust mechanical strength and comparable properties to their single crystals form. However, the development of multilayered actuators using textured PMN-PIN-PT ceramics has not been achieved until now. This study presents the development of a multilayered actuator using textured 0.37PMN-0.29PIN-0.34PT ceramics with an Ag_0.9/Pd_0.1 inner electrode, co-fired at 950℃. A random 0.37PMN-0.29PIN-0.34PT ceramics multilayered actuator was also developed for comparison. The multilayered actuator consisted of 9 ceramic layers (36 ㎛ thickness) with an overall actuator thickness of 0.401 mm. The textured and random 0.37PMN-0.29PIN-0.34PT ceramics-based multilayered actuators achieved displacements of 0.61 ㎛ (0.15% strain) and 0.23 ㎛ (0.057% strain) at a low applied peak voltage of 100 V. These results suggest that the developed multilayered actuator using high-performance textured 0.37PMN-0.29PIN-0.34PT ceramics has the potential to replace expensive single crystal-based actuators cost-effectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.375-378
• /
• 2007

Abrasive wear between piston ring face and cylinder liner is an extremely unpredictable and hard-to-reproduce phenomenon that significantly decreases engine performance. Wear by abrasion are forms of wear caused by contact between a particle and solid material. Abrasive wear is the loss of material by the passage of hard particles over a surface. From the pin-on-disk test, particle dent test and scuffing test, abrasive wear characteristics of diesel engine cylinder liner-piston ring have been investigated. Pin-on-disk test results indicate that abrasive wear resistance is not simply related to the hardness of materials, but is influenced also by the microstructure, temperature, lubricity and micro- fracture properties. In particle dent test, dent resistance stress decreases with increasing temperature. From the scuffing test by using pin-on-disk tester, scuffing mechanisms for the soft coating and hard coating were proposed and experimentally confirmed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.270-273
• /
• 2000

We have fabricated and analyzed photodiodes for optical link with Si pin structures. As the results of experiment, the web patterned photodiode(type C) with $p^{+}$-guard ring showed low junction capacitance of 6~7 pF at $V_{R}$=-5V and high separation ability for optical signal(dark current : $\leq$ 5 nA, optical signal current : $\geq$ 340 nA) due to the small effective $p^{+}$-n junction area and the expanded electric field region. The fabricated Si pin photodiode can be applicable for detecting an optical signal with the wavelength of about 660~670 nm. It can also be integrated with the twin well CMOS structure to develope an one chip based optical receiver IC. IC.C.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.1-12
• /
• 2001

In cold forging of piston-pin for automobile parts, the flow defect appears by the dead metal zone. This appearance evidently happens in products with a thin piercing thickness for the dimension accuracy and the decrease of material loss. The best method that can prevent flow defect is removing dead metal zone. The purpose of this study is to investigate the material flow behavior of forward-backward extruded piston-pin through the relative velocity ratio and the stroke control of upper moving punch & container using the flow control forming technique. The finite element simulations are applied to analyse the flow defect, then the results are compared with the plasticine model material experiments. Finally, the model experiment results are in good agreement with the FE simulation ones.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.159-162
• /
• 2001

A combined finite element and experimental study based on the characteristic length method is performed to investigate the strength and behavior of the pin joint in composite control rod. The failure is estimated by the Yamada-Sun and Tsai-Wu criteria on the characteristic curve. The gap elements are used to simulate the contact between the pin and the composite fitting with hole. The accuracy and applicability of the method are validated by the joint tests. All the specimens were failed in the bearing mode in the test and finite element analysis, and good agreement was found between the predicted and test results on the joint strength of composite control rod.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.239-244
• /
• 1997

A hair-pin shaped microstrip-line resonator and a dielectric resonator for injection-locked oscillators have been designed and fabricated for the comparative studying of their characteristics. In general, a commonly used dielectric resonator shows lower phase noise value than hair-pin resonator in the free-running mode. In the injection-locked mode, however, a hair-pin resonator is superior to the dielectric resonator; the wider tuning range, the 22% improved locking bandwidth, the lower noise effect, the short term stability, and the higher power level. The planar structure of a hair-pin shaped microstrip-line resonator will be easily applied to monolithic microwave integrated circuits.

• Journal of Welding and Joining
• /
• 제19권5호
• /
• pp.540-547
• /
• 2001

This study has evaluated the wear behavior of PTA (Plasma Transferred Arc) Inconel 625 and Stellite 6 overlays on Nimonic 80A substrate. Nimonic 80A alloy was also included for comparison. In order to evaluate the wear performance, three-body abrasive wear test and pin-on-disk dry sliding wear test were performed. Microstructural development during the solidification of deposits is also discussed. Wear test results show that the wear rate of Stellite 6 deposit is lower than that of Inconel 625 deposit and Nimonic 80A. The sliding wear resistance of overlay deposits follows a similar trend to the abrasive wear resistance, but for Nimonic 80A. The main wear mechanisms were abrasive wear for Inconel 625 deposit, adhesive wear and delamination for Stellite 6 deposit in pin-on-disk dry sliding wear test and ploughing in three-body abrasive wear test. Cross sectional examinations of the worn surface of pin specimens after pin-on-disk dry sliding wear test implies that the plastic deformation near worn surface has occurred during the wear testing.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.221-224
• /
• 2009

In this paper, we deal with the development of an optimal design program for a dual-band of 0.92 GHz and 2.45 GHz with shorting pin and slot by using evolution strategy. the optimal shorting pin, coaxial feed and H-shaped patch are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The resonance frequencies of the dual-band antenna yielded by the optimal design program are 0.92 GHz and 2.45 GHz that show a good agreement to the design target values.