• 한국전자파학회논문지
• /
• 제18권8호
• /
• pp.854-861
• /
• 2007

본 논문에서는 radar detector에 사용 가능한 국부 발진단용 소형화된 L 모양 shorted pin patch를 제안하였다. Shorted pin patch는 일반적인 구형 patch가 가지는 open-open 공진 형태가 아닌 short-open 공진 형태를 가지고 작동한다. L모양의 shorted pin 배열은 기본 모드(X-band), $2^{nd}\;and\;3^{rd}$ 모드에서 ${\lambda}/4$ 및 $3{\lambda}/4$의 공진 구조를 가지게 되어 일반적인 구정 patch보다 소형화가 가능하다 최적화된 L 모양 소정 shorted pin patch는 국부 발진단의 발진 주파수 대역(X, K and Ka band)에서 공진이 일어나 향상된 반사 손실을 가지게 되고, 이에 따라 기존 대비 향상된 radar detector의 감도는 얻을 수 있을 것으로 예상된다.

• 한국전자파학회논문지
• /
• 제27권2호
• /
• pp.156-162
• /
• 2016

본 논문은 직교편파로 동작하는 이중대역의 동작주파수를 변환하는 마이크로스트립 안테나를 제안하였다. 제안한 안테나는 서로 수직한 급전부와 1개의 PIN 다이오드가 집적된 형태의 H 모양의 슬롯이 구비된 방사체로 구성된다. PIN 다이오드의 상태에 따라 H 모양 슬롯의 기하학적 모양이 변함을 이용하여, 수평편파를 제공하는 주파수는 고정된 상태로, 수직편파로 동작하는 주파수를 변환할 수 있다. 제작된 안테나는 PIN 다이오드의 인가전압에 따라 직교편파를 제공하는 1.80 GHz와 2.06 GHz의 이중대역이 2.06 GHz에서 2.43 GHz로 원활하게 변환됨을 측정실험을 통해 검증하였다. PIN 다이오드 상태 별로 각각 측정된 반사계수, 안테나 이득 및 원거리 방사패턴은 이론적인 분석과 잘 일치되었다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.409-410
• /
• 2002

In order to measure the oil-film pressure in sliding surface of machinery, we have developed a piezo-resistive type thin-film pressure sensor. To reduce the measurement error due to temperature and strain, the constituent of the pressure sensitive alloy was optimized and a new sensor shape was devised. In this study, we present the measurement results of the oil-film pressure distribution in engine connecting rod big-end bearing and piston pin- bosses with 3 different pin-boss shapes using the newly developed thin-film pressure sensor.

• 동력기계공학회지
• /
• 제4권2호
• /
• pp.46-51
• /
• 2000

The contact stress characteristics of the domestic CPF pin when inserted into the rigid PTH was analyzed using the finite element method. The model geometry was based on the shape of the existing pin and the two different PTH diameters were used in the analysis. The stress distributions with respect to the friction coefficients were compared and the stress variations of the compliant part of the pin, which have an influence on the performance, were displayed with the time and the arc length on complete connection.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.9-14
• /
• 2002

Ferrule is widely used as fiber optic connecters. In fiber-optic communications, the shape accuracy such as coaxiality and cylindricity of ferrule affects insertion loss. When coaxial grinding of ferrule supported by two pin, pin alignment and chucking accuracy are very important. In this research, the kinematic behavior of the ferrule center is investigated in the case where cone-shaped center pins and round circle hales which make contact with each other near the edge of the holes, using homeogenous coordinate transformation and numerical analysis. The obtained results are as follows: The alignment errors between center pins alone do not affect the rotation accuracy of ferrule. The alignment errors between center holes cause a sinusoidal displacement of ferrule. And the maximum displacement of ferrule centers increase in proportion to the center pin angle in the case of a fixed alignment errors

• 산업기술연구
• /
• 제24권A호
• /
• pp.9-15
• /
• 2004

The flexural strength from 3-point bend test and fatigue properties were measured to evaluate mechanical properties of metal/ceramic interface of the multilayer ceramic package produced through tape casting. From the results, the specimens with three electrode layers showed the highest strength. The temperature distribution with time during thermal cycle and thermal stresses with the change of electrode's shape have been estimated by mathematical modelling. Specimen affected by thermal shock, produced microcracks by the difference of thermal expansion coefficient. The results of tensile test and fatigue test showed the rupture at pin. The fact that the pin brazed specimens were always fractured at the pin proved the good bonding condition between pin and electrode.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.987-991
• /
• 2003

Ferrule is widely used as fiber optic connecters. In fiber-optic communications, the shape accuracy such as coaxiality and cylindricity of ferrule affects insertion loss. When coaxial grinding of ferrule supported by two pin, pin alignment and chucking accuracy are very important. In this research, the kinematic behavior of the ferrule center is investigated in the case where cone-shaped center pins and round circle holes which make contact with each other near the edge of the holes, using homeogenous coordinate transformation and numerical analysis. The obtained results are as follows: The alignment errors between center holes cause a sinusoidal displacement of ferrule. And the maximum displacement of ferrule centers increase in proportion to the center pin angle. The relationship between center pins displacement in coaxial grinding and grinding accuracy was explained.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.444-449
• /
• 2004

The design modification of bottom guide structures of the instrumented capsule, which is used for the irradiation test in the HANARO reactor, was required because of the trouble of the bottom guide arm's pin during irradiation. The previous structure with 3-pin arms was changed into the cone shape of one body. The specimens of the bottom end cap ring with three different sizes (${\Phi}68/70/72mm$) were designed and manufactured. The out-pile tests for the capsule with previous and new three bottom guide structures were performed in the one-channel flow test facilities. In order to evaluate the compatibility with HANARO and the structural integrity of the capsule, a loading/unloading, a pressure drop, a thermal performance, a vibration, and an endurance test were conducted. From out-pile test results, the capsule with the cone shape bottom guide structures was found to be more stable than the previous structure and the optimized size of the bottom guide structure selected was 70mm in diameter. It is expected that the new bottom guide structures will be applicable to all material and special capsules which will be designed and manufactured for the irradiation tests in the future.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권7호
• /
• pp.339-342
• /
• 2005

We present a new high-frequency equivalent circuit model for 52pin QFP used in typical IC's and extract R, L, and C values of this circuit model using a 3-D E & M field simulator. Futhermore, L and C value variations as a function of Pin number due to the shape differences of the leads have been fitted to 2nd order polynomials in order to extend the applicability of this model.

• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.115-119
• /
• 2015

This paper proposes a reconfigurable square-patch antenna with polarization diversity. The proposed antenna consists of a square radiating patch and a Y-shaped feed structure with two PIN diodes. The shape of the feed structure can be changed by adjusting the bias states of the two PIN diodes, which helps switch between two orthogonal linear polarizations. The polarization diversity characteristic is validated by the simulated current distribution and the measured radiation pattern.