• 디지털산업정보학회논문지
• /
• 제15권2호
• /
• pp.63-70
• /
• 2019

To increase the efficiency of task on the desk, this paper proposes a reconfigurable desk. The proposed reconfigurable desk is based on the Pin Art technology. For the design of the proposed desk, the upper surface of the desk is divided into small units, and then the user easily controls the height of the divided pieces to make desk a desired shape by using the proposed user interface. The Arduino module controls the hardware and the user interface is configured by using Android applications, making it easy for anyone to use. Through extensive experiments, the proposed system shows that various types of deformations are possible and thus the utilization is very high by mounting diverse devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1315-1318
• /
• 2008

It is well-known that PIN technology is beneficial for numerous OLED applications, e.g. active and passive matrix displays, lighting and signage. Furthermore, it can be used for other organic electronic applications such as OTFTs and organic solar cells. Here, the state of the art of the PIN technology and the latest results from the different application fields are presented.

• 방송공학회논문지
• /
• 제25권4호
• /
• pp.497-506
• /
• 2020

본 논문에서 제안된 카멜레온형 서피스 (chameleonic surface)는 핀 아트 (pin-art) 장치로서 임의 형상 발생용 입체 디스플레이 장치이다. 슬림 텔레스코픽 액츄에이터 (slim telescopic actuator)와 고탄성의 복합 소재로 생성되는 부드럽고 연속적인 곡면 위에 동적 매핑 영상을 투사하여 사실적인 입체 형상을 연속적으로 생성할 수 있다. 슬림 텔레스코픽 액츄에이터는 적층을 위하여 긴 행정거리를 가지면서 최소 점유 면적을 가지도록 설계하였다. 3차원 형상은 다수의 슬림 텔레스코픽 액츄에이터가 고탄성 소재를 밀어서 돌출시켜서 만들어진다. 이와 같은 구조는 임의의 연속적인 곡면 형상 생성, 동적 영상 투사 및 장치 경량화 등의 장점이 있었다. 수백 개의 슬림 텔레스코픽 액츄에이터가 원활하게 동작하기 위하여 실시간 동기화가 가능한 이더캣 (EtherCAT) 통신 기반의 분산 제어기를 적용하였다. 통합 운영 소프트웨어로 돌출 형상과 입체 영상을 정합하고 다수 영상 투사기로 투사하여 실감 영상을 연속적으로 생성할 수 있었다. 실제 공연을 위하여 오페라용 콘텐츠를 제작하면서 카멜레온 서피스에 최적화하였고, 일반인들을 대상으로 상영하였다.

• 설비공학논문집
• /
• 제16권7호
• /
• pp.623-629
• /
• 2004

Rapid development of electronic technology requires small size, high density packaging and high power of electronic devices, which result in more heat generation by the electronic system. Present cooling technology may not be adequate for the thermal management in the current state-of-the-art electronic equipment. Forced convective heat transfer in a channel filled with pin-fin array is studied experimentally in this paper as an alternative cool-ing scheme for a high heat-dissipating equipment. Various configurations of the pin-fin array are selected in order to find out the effect of spacing and diameter of the pin-fin on the heat transfer and pressure drop characteristics. In the low porosity region, interfacial heat transfer and pressure drop seem to show different trend compared to the conventional heat transfer process.

• 설비공학논문집
• /
• 제18권6호
• /
• pp.459-467
• /
• 2006

Rapid development of electronic technology requires small size, high density packaging and high power in the electronic devices, which results in more heat generation. Suitable heat dissipation is required to ensure the guaranteed performance and reliable operation of the current state-of-the-art electronic equipment. The aim of the present study is to find out the forced-convective thermal-hydraulic characteristics of a pin-fin heat exchanger as a candidate for cooling system of the electronic devices through the analysis and experiment. Various configuration of the pin-fin array is selected in order to find out the effect of spacing and diameter of the pin-fin on the heat transfer and pressure drop characteristics. Experimental results are compared with the analyses and correlations of several researchers. Finally, the design guide are provided for the required pressure drop and/or the heat transfer characteristics of the heat exchanger.

• 설비공학논문집
• /
• 제23권7호
• /
• pp.498-504
• /
• 2011

As the electronic industry rapidly develops, the heat flux from state-of-the-art electronics increases up to $10^6\;W/m^2$. For this reason, the development of a new cooling technology for high heat flux applications is strongly required. Recently, some cooling technologies using boiling and condensation of working fluid are being adopted to overcome such a technical barrier. In the present study, a smooth boiling surface ($14{\times}14\;mm^2$) was immersed in FC-72 and its vapor was condensed by four different types of condensation surfaces ($30{\times}30\;mm^2$ base). The condensing surfaces were composed of a smooth surface and $1{\times}1\;mm^2$ pin-finned surfaces of 2 mm height with 0.3, 0.5 and 1 mm array spacing. Boiling and condensing characteristics were investigated in detail on their combinations of boiling and condensing surfaces. For a smooth boiling surface the results obtained showed that the pin-finned condensing surface with 1 mm array spacing yielded the best performance and the smooth condensation surface did the worst. Furthermore hysteresis phenomena could be reduced by using enhanced condensing surfaces.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2395-2407
• /
• 2022

The sodium-cooled fast reactor is among the innovative nuclear technologies selected in the framework of the development of Generation IV concepts, allowing the irradiation of uranium-plutonium mixed oxide fuels (MOX). A fundamental step for the safety assessment of MOX-fuelled pins for fast reactor applications is the evaluation, by means of fuel performance codes, of the integral thermal-mechanical behaviour under irradiation, involving the fission gas behaviour and release in the fuel-cladding gap. This work is dedicated to the performance analysis of an inner-core fuel pin representative of the ASTRID sodium-cooled concept design, selected as case study for the benchmark between the GERMINAL and TRANSURANUS fuel performance codes. The focus is on fission gas-related mechanisms and integral outcomes as predicted by means of the SCIANTIX module (allowing the physics-based treatment of inert gas behaviour and release) coupled to both fuel performance codes. The benchmark activity involves the application of both GERMINAL and TRANSURANUS in their "pre-INSPYRE" versions, i.e., adopting the state-of-the-art recommended correlations available in the codes, compared with the "post-INSPYRE" code results, obtained by implementing novel models for MOX fuel properties and phenomena (SCIANTIX included) developed in the framework of the INSPYRE H2020 Project. The SCIANTIX modelling includes the consideration of burst releases of the fission gas stored at the grain boundaries occurring during power transients of shutdown and start-up, whose effect on a fast reactor fuel concept is analysed. A clear need to further extend and validate the SCIANTIX module for application to fast reactor MOX emerges from this work; nevertheless, the GERMINAL-TRANSURANUS benchmark on the ASTRID case study highlights the achieved code capabilities for fast reactor conditions and paves the way towards the proper application of fuel performance codes to safety evaluations on Generation IV reactor concepts.

• Clinical and Experimental Reproductive Medicine
• /
• 제23권1호
• /
• pp.103-108
• /
• 1996

Through the previous studies(I,II), it was observed that human follicular fluid(HFF) was more effective than human fetal cord serum(HFCS) on promoting meiotic resumption of oocytes and improving embryonic development of mouse in vitro. On the basis of these results, we have gradually exchanged HFCS with HFF as protein supplement in human ART. This study was performed to investigate the efficiency of HFF on improving the pregnancy rate in ART. Oocytes were retrieved transvaginally from patients treated with pituitary suppression with GnRH-agonist and ovarian stimulation with human menopausal gonadotro-pin(HMG) and pure follicle stimulating hormone(FSH). Aspirated oocytes were rinsed and cultured in TCM-199 containing HFF, and the concentrations of HFF were adjusted to 10, 20, and 30% according to the use for insemination, embryo growth and embryo transfer, respectively. As possible as, we tried to do embryo transfer into fallopian tube to mimic the coincidence of the cell stage with the place of sojourn in vivo, so we performed various ART programs(IVF & ET; in vitro fertilization, ZIFT; zygote intra fallopian-tube transfer, ZIFT & ET) according to the tubal conditions of patients. On the while, intra cytoplasmic sperm injection(ICSI) was used to assist IVF of the patients who had shown poor standard IVF results by immunological or severe male factor. Of the 255 cycles of ART programs using HFF as protein supplement, 118 cycles were turn out to be succeeded in pregnancy(46.2%, per cycle, p<0.05), while 21 pregnancies were achieved in the 69 cycles using HFCS(30.4%). The 255 cycles using HFF were subdivided into cycles with the type of ART programs, and each pregnancy rate of the ART programs were 44.7% (IVF & ET, 76/170 cycles), 53.4%(ZIFT, 31/58 cycles) and 40.7% (ZIFT & ET, 11/27 cycles), respectively. In the 61 ICSI cycles using HFF, 28 cycles succeed in pregnancy(45.9%), while 7 pregnancies were obtained in the 17 ICSI cycles using HFCS. Also the ongoing pregnancy rate in the group using HFF(78.8%, 93/118 cycles) was higher than that in the group using HFCS(61.9%). Therefore, we found that the use of HFF as protein supplement was more suitable and effective than the use of HFCS to improve the pregnancy rate in ART.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제8권6호
• /
• pp.939-946
• /
• 2018

본 논문에서는 그래핀의 우수한 전기적 기계적 특성을 이용하여 정전기 인력에 의하여 휘어지는 그래핀이 수직 팁 게이트에 접촉 여부에 따라서 스위칭이 이루어지도록 조절할 수 있는 3단자 그래핀 NEMS 스위칭 소자에 대하여 연구하였다. 전형적인 MEMS 제작 공정을 이용하여 3단가 그래핀 NEMS 스위칭 소자 제작을 위한 공정을 설계하였고, 그 동작의 핵심 역학은 그래핀에 작용하는 정전기력과 그래핀 자체의 탄성력에 의하여 스우칭의 기계적인 동작이 설명될 수 있었다. 전기적인 동작에서는 그래핀과 핀 전극 사이의 접촉에 의한 접촉 전류와 그래핀이 전극에 접촉하지 않았음에도 그래핀과 핀 전극 사이의 강한 전기장으로 인한 방출전류가 흐를 수 있을 것으로 예상되었다. 실제 기계적인 동작에서 원자단위에서의 움직임을 분석하기 위하여 분자동력학 시뮬레이션 방법을 사용하여 수직 팁 게이트를 가지는 그래핀 기반 3단자 NEMS 스위치 동작에 관하여 연구하여, 기계적인 동작에 따라서 발생되는 다양한 현상들을 분자동력학 시뮬레이션을 통하여 연구함으로써 원자단위에서 이루어지는 다양한 역학들을 살펴보았다.

• 대한건축학회논문집:계획계
• /
• 제36권2호
• /
• pp.63-70
• /
• 2020

In the ancient Buddhist temple area, various metal artifacts are still excavated. Therefore, the aim of this study is to approach the characteristics of ancient architecture through ancient metal artifacts. First, metal decoration of ancient architecture appears for the purpose of structure, decoration, arson. Then, as the method of wood structure is developed, the application is separated into structural, functional and decorative purposes. In ancient times, metal decoration has reduced the role of structure, but its decorative role has expanded. Second, various metallic ornaments were used on the roof of ancient architecture. As the wooden technology developed, the metal decoration was gradually omitted while applying the curve to the roof. Third, the metal ornaments used on the roof of ancient architectures include the ridge central decoration, roof top decoration, a nine-ring decoration, gable board Ornamental Metal, corner flower decoration, eaves nail, wind bell. And subsequent research requires a terminology that can link the results of archeology and Buddhist art through excavation as a result of architecture.