• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.3
• /
• pp.43-54
• /
• 2006

The National Wealth Survey Method has been used to estimate capital stocks in Korea by the Korea National Statistical Office in every 10 years. However, this method requires huge amount of time and money, Since the Benchmark Year Method also has similar problems of difficulties to estimate the annual retirement rate and depreciation, the Korea National Statistical Office is now considered to adapt the Perpetual Inventory Method being used by the most OECD countries as an alternative. Hence, in this paper, the concepts of the Perpetual Inventory Method are introduced and its formation plans for the National Wealth Survey are suggested.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.4
• /
• pp.282-288
• /
• 2008

In this paper, the Passive Intermodulation Distortion(PIMD) of high power RF Filter is measured with filter inner coating materials and we suggest how to reduced the PIMD of RF filter coating methods. According to the standard measurement regulation by IEC, the Passive Intermodulation Distortion of Wibro relay high power filter are measured. We suggest the coating materials and coating methods of high power filter inner structure to reduce the PIMD generating by insert loss and worse flatness of filter delay in the design of Wibro high power filter efficiently.

• Journal of Powder Materials
• /
• v.21 no.6
• /
• pp.407-414
• /
• 2014

The powder injection molding process having advantages in manufacturing three-dimensional precision parts essentially requires a debinding process before sintering to remove the binders used for preparing feedstock. In this study, powder injection molding of translucent alumina was performed, and carbon dioxide ($CO_2$) is used as a supercritical fluid that makes it possible to remove a large amount of binder, which is paraffin wax. The relationship between the optical property of translucent alumina and the debinding condition (temperature and pressure) of supercritical $CO_2$ was investigated. As temperature and pressure increased, extraction rate of the binder showed rising tendency and average grain size after sintering process was relatively fine. On the other hand, optical transmittance was reduced. As a result, the debinding condition at $50^{\circ}C$ and 20 MPa that represents the lowest extraction rate, $8.19{\times}10^{-3}m^2/sec$, corresponds to the largest grain size of $14.7{\mu}m$ and the highest optical transmittance of 45.2%.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.343-344
• /
• 2006

Powder injection molding(PIM) is widely used for many parts in the field of automotives, electronics and medical industries, due to the capability of net shaping for complex 3-D geometry. Powder injection mold design fur the dental scaler tip, a component of medical appliance, was presented. In comparison with conventional machining process, powder injection molding has many advantages, specially in price and dimensional stability, for molding dental scaler tip which has complex geometry. Both product design and mold design for dental scaler tip were presented. The 'rapid mold' concept was applied to manufacture the various forms of dental scaler tip.

• Biomedical Science Letters
• /
• v.15 no.3
• /
• pp.261-263
• /
• 2009

Methylprednisolone is a synthetic glucocorticoid which is usually taken intravenously for many neurosurgical diseases which cause edema including brain tumor, and trauma including spinal cord injury. Methylprednisolone reduces swelling and decreases the body's immune response. It is also used to treat many immune and allergic disorders, such as arthritis, lupus, psoriasis, asthma, ulcerative colitis, and Crohn's disease. To identify genes expressed during methylprednisolone treatment against neurons of rats (PC12 cells), DNA microarray method was used. We have isolated 2 gene groups (up- or down-regulated genes) which are methylprednisolone differentially expressed in neurons. Lipocalin 3 is the gene most significantly increased among 772 up-regulated genes (more than 2 fold over-expression) and Aristaless 3 is the gene most dramatically decreased among 959 down-regulated genes (more than 2 fold down-expression). The gene increased expression of Fgb, Thbd, Cfi, F3, Kngl, Serpinel, C3, Tnfrsf4 and Il8rb are involved stress-response gene, and Nfkbia, Casp7, Pik3rl, I11b, Unc5a, Tgfb2, Kitl and Fgf15 are strongly associated with development. Cell cycle associated genes (Mcm6, Ccnb2, Plk1, Ccnd1, E2f1, Cdc2a, Tgfa, Dusp6, Id3) and cell proliferation associated genes (Ccl2, Tnfsf13, Csf2, Kit, Pim1, Nr3c1, Chrm4, Fosl1, Spp1) are down-regulated more than 2 times by methylprednisolone treatment. Among the genes described above, 4 up-regulated genes are confirmed those expression by RT-PCR. We found that methylprednisolone is related to expression of many genes associated with stress response, development, cell cycle, and cell proliferation by DNA microarray analysis. However, We think further experimental molecular studies will be needed to figure out the exact biological function of various genes described above and the physiological change of neuronal cells by methylprednisolone. The resulting data will give the one of the good clues for understanding of methylprednisolone under molecular level in the neurons.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.1017-1024
• /
• 2017

Carbon thin films were deposited by HiPIMS(High Power Impulse Magnetron Sputtering). The properties and microstructures of carbon thin film were investigated with power, pressure, bias voltage and duty cycle. As the HiPIMS power increased, the deposition thickness increased and the surface tended to be rough. The increase in pressure also tended to make the surface rough, but the deposition thickness was not proportional to the pressure. As the bias voltage increased, the surface roughness became worse, the deposition thickness increased and then decreased from the critical bias voltage. Changes in the duty cycle have caused problems such as arcing, which is affected by the chamber structure and the size of the target. The $sp^2/sp^3$ fractions of thin films were estimated by XPS and it was confirmed that the fraction of thin films made by HiPIMS were larger than the fraction of thin films made by DC sputtering.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.15 no.1
• /
• pp.85-91
• /
• 2009

Objectives: We investigated the influence of the neck acupressure massage and the neck cream including korean herbal extract on the neck wrinkles and blood circulation. Methods: Korean female($37.47{\pm}3.66$ years, n=18) aged 30-39 years were participated in this study. We measured the neck wrinkles with PRIMOS(GFMesstechnik GmbH, Germany) and blood circulation of neck and facial skin with Laser Doppler Imaging-Periscan PIM II(Perimed AB, Sweden). Results: The neck wrinkles were significantly decreased after applying neck cream. But when with the neck acupressure massage, the neck wrinkles were decreased 2-fold than applying only the neck cream. The skin blood circulation was significantly increased on the neck and facial skin immediately after the neck acupressure massage. But this effect was not significantly different after 8 weeks Conclusions: This result suggests that the neck acupressure massage can improve the anti-wrinkles effect of the neck cream including Korean herbal extract.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.12
• /
• pp.6319-6325
• /
• 2012

We previously found cytotoxic effects of tomato leaf extract (TLE) on the MCF-7 breast cancer cell line. The aim of this study was to ascertain the molecular mechanisms associated with the usage of TLE as an anticancer agent by microarray analysis using mRNA from MCF-7 breast cancer cells after treatment with TLE for 1 hr and 48 hrs. Approximately 991 genes out of the 30,000 genes in the human genome were significantly (p<0.05) changed after the treatment. Within this gene set, 88 were significantly changed between the TLE treated cells and the untreated MCF-7 cells (control cells) with a cut-off fold change >2.00. In order to focus on genes that were involved in cancer cell growth, only twenty-nine genes were selected, either down-regulated or up-regulated after treatment with TLE. Microarray assay results were confirmed by analyzing 10 of the most up and down regulated genes related to cancer cells progression using real-time PCR. Treatment with TLE induced significant up-regulation in the expression of the CRYAB, PIM1, BTG1, CYR61, HIF1-${\alpha}$ and CEBP-${\beta}$ genes after 1 hr and 48 hrs, whereas the TXNIP and THBS1 genes were up-regulated after 1 hr of treatment but down-regulated after 48 hrs. In addition both the HMG1L1 and HIST2H3D genes were down-regulated after 1 hr and 48 hrs of treatment. These results demonstrate the potent activity of TLE as an anticancer agent.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.14 no.2
• /
• pp.73-79
• /
• 2008

Objectives : We investigated the correlation of the skin color to blood circulation on the face of Korean female by noninvasive-skin measuring devices. Methods : Korean female(37.47${\pm}$3.66 years, n=36) aged 30-45 years were participated in this study. We measured the skin color of the face with Spectrophotometer CM2600d (Minolta, Japan) and the skin blood flow with Laser Doppler Imaging-Periscan PIM II (Perimed AB, Sweden). The skin color and blood circulation of three groups (30-35 years, 36-40 years, 41-45 years) divided on age were analyzed by paired-t test and regression analysis. Results : The L* values of the skin were decreased and the a* values were increased significantly with age. This means that the more age increase, the more the skin is dark and red. But the skin blood flow was not significantly different with age and skin color. Conclusions : In the oriental medicine, It was reported that the face of the female over 35 years is changed gradually haggard and the blood circulation is decreased. In our study, the blood circulation was not changed and the skin color was dark and red with increasing the age. We think this symptom resulted from the better nutrition than the past, the change of the blood-quality and this changes were too sensitive to be measured by Laser Doppler Imaging system.

• KSBB Journal
• /
• v.21 no.3
• /
• pp.224-229
• /
• 2006

FEMLAB is a powerful interactive environment for modeling, solving all kinds of scientific and engineering problems based on partial differential equations(PDEs). Separation process of chiral compound in HPLC columns was simulated by FEMLAB. To study change of elution profile with isotherm models, non-competitive and competitive Langmuir adsorption isotherm were adopted. Separated material was (R, S)-ibuprofen [(R, S)-2-(4-isobutyl phenyl) propionic acid], an anti-inflammatory agent, which retain the pharmacological activity in the (S)-(+)-enantiomer. Sample concentrations were changed from 0.5 mg/ml to 2.0 mg/ml at a flow rate of 1 ml/min and flow rate varied from 1 ml/min to 3 ml/min at an ibuprofen concentration of 2.0 mg/ml and $20{\mu}l$ of injection volume. Simulated results were well fitted with experimental data.