• 한국환경보건학회지
• /
• 제15권2호
• /
• pp.1-9
• /
• 1989

A pilot study was conducted in order to measure indoor and outdoor formaldehyde levels during August 3 - 22, 1988 in several underground spaces in Seoul. Formaldehyde concentrations were monitored during 1 week in selected sampling areas (subway station, underground shopping center, underpass, tunnel, underground parking lot) using passive formaldehyde monitors. In order to investigate a relationship between respiratory prevalence and levels of formaldehyde, each subject was asked to answer respiratory questions. The mean formaldehyde concentrations were 60.1 ppb in subway station, 122.2 ppb in underground shopping stores, 72.1 ppb in underpasses, 39.7 ppb in tunnel, and 75.9 ppb in underground parking lots, respectively. The mean indoor formaldehyde concentrations in underground environments varied from 28.6 ppb to 118.7 ppb. Generally, the mean formaldehyde concentrations in ticketing office in subway stations appeared higher than those level measured in platform. The mean formaldehyde concentrations of underground shopping center in Gangnam Terminal were higher than any other areas and it exceeded 100 ppb of the American Ambient Air Quality Standards of formaldehyde. Prevalence rates of respiratory symptoms of dwellers seemed to be related to higher indoor formaldehyde levels.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.253-254
• /
• 2002

The determination of thrust is very important in hypersonic air-breathing propulsion design and evaluation. Because of the short flow-residence time in the combustor, the evaluation of engine performance is strongly influenced upon the engine thrust. Conventional methods to determine the thrust is using thrust stand or force measurement system. However, these methods cannot be applied to the case where thrust stands are impractical, such as free jet testing of engines, and model combustor. With this reason, the thrust determination method from measured pilot pressure is considered and evaluated.

• 화약ㆍ발파
• /
• 제8권4호
• /
• pp.3-22
• /
• 1990

The $\varphi{4.5}$ meters pilot tunneling work is almost done to the $\varphi{11.3}$ meters twin tunnel of NAM SAN No1. The south side pit of 400 meters is weak zone of Rock status, so client request us to allow the cautious blasting pattern for drilling on the condition of 0.2 kine vibration allowance limited for the safety of side running tunnel. The pattern of cautious blasting carried out by 6 time divided fiving on the round drilling depth of 1.20 meters(1.10) and also applied control blasting method with line drilling due to the reduction of vibration.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.22-28
• /
• 2001

Heat transfer and pressure distribution for heat exchanger type of domestic gas boiler are different from shape, pitch, thickness of fin and array of pipe respectively. In order to measure the pressure distribution across the heat exchanger, a suction type wind tunnel was constructed and velocity distribution was measured for pilot tube(4 point) of rack type. The experiments were performed for 5 different air flow mass, rpm=3,6,9,12,15 and transverse axis of heat exchanger(x-length) is 5cm respectively. Results showed that above 9.5m/s, pressure distribution dispersion for wet type of heat exchanger is on the increase and above 5.5m/s, pressure distribution dispersion for dry type of heat exchanger is on the increase. Also, pressure distribution dispersion by comparing two different types heat exchanger, dry type of heat exchanger showed a higher augmentation than wet type of heat exchanger.

• 대한조선학회논문집
• /
• 제42권5호
• /
• pp.448-457
• /
• 2005

The experiment was performed at the large wind tunnel of the Chungnam National University to measure the velocity distribution around the stern of a Liquefied Natural Gas Carrier model. The data, mean velocity vectors of turbulent shear flows at the stern and near-wake including the propeller plane, were obtained by a five-hole Pilot tube for the double body model fixed inside the wind tunnel test section. The present result of the double body model shows a close agreement with the result of the lowing tank experiment performed by the KRISO for the same ship model. The characteristics of the LNG stern flow are discussed based on the measured velocity distribution. The data can be very useful for the validation of some numerical methods in computational fluid dynamics.

• 한국지반환경공학회 논문집
• /
• 제12권3호
• /
• pp.27-35
• /
• 2011

본 연구는 터널발파에서 소음저감을 목적으로 설치되는 방음시설 개발을 위하여 현장에서 주로 사용되는 방음재와 물, 모래 등을 이용하여 각 재질에 따른 소음저감효과를 판단하였다. 최대 소음레벨과 주파수의 범위를 측정하여 방음재질별 소음감쇠도와 주주파수 대역의 음압레벨을 고찰하였다. 그리고, 방음재료 분석의 결과를 반영하여 물과 스펀지 등으로 채운 개량형 워터튜브 방음문과 기존 스펀지 부직포 등으로 채운 방음문을 축소 제작하여 화약을 사용하여 실대형 현장실험을 통한 검증을 하였다. 그 결과 물을 차음재료로 사용한 경우에 기존 방음문에 비해 약 10dB(A) 정도의 소음 저감효과를 나타내었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.87-92
• /
• 2000

In excavation of tunnels especially located in shallow depth, it is not rare to meet geological change in excavation progress worse than expected in the initial design stage. This paper present a case study on the re-design of excavation and support system of a shallow tunnel under construction where it meets the unexpected bad geological condition during excavation. The detailed geological investigation shows that the rock mass is heavily weathered and fractured with RMR value less than 20. Considering this geological condition, the design concept is focused on the reinforcement of the ground preceding the excavation of tunnel. Two design patterns, LW-grouting & forepoling with pilot tunnelling method and the steel pipe reinforced grouting method, are suggested. Numerical analysis by FLAC shows that these two patterns give the tunnel and roof ground stable in excavation process while the original design causes severe failure zone around the tunnel and floor heaving. In point of the mechanical stability and the degree of construction, the steel pipe reinforced grouting technique proved to be good for the reinforcement of heavily fractured rock mass in tunnelling. This assessment and design process would be a guide in the construction of tunnels in heavily weathered and fractured rock mass situation.

• 한국지반공학회논문집
• /
• 제21권5호
• /
• pp.133-142
• /
• 2005

본 연구는 지난 5년간 개발해온 인홀 발진자를 터널 막장의 강성도 계측에 사용가능하도록 개선하는데 주력하였다. 프로브는 터널의 폭파를 위해 점보드릴로써 천공된 직경 45m의 홀에 맞추기 위하여 소형화되었다. 또한 트리거 시스템은 감속모터를 사용함으로서 편리하게 되었고, 에어 팩킹 시스템은 압축공기 없이 사용하기위한 플레이트 스프링으로 교체하였다. 이러한 개선은 프로브를 터널내부의 환경에 적합하게 만들고 추가되는 비용 없이 실험하기 위함이다. 프로브와 테스트 과정은 암반의 강성을 측정하기 위해 터널의 막장의 수평 홀에 성공적으로 적용되었다. 측정된 전단파 속도는 터널 해석을 위한 암반의 변형 특성을 측정하는 것에 사용될 수 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 지반조사위원회 봄 학술세미나
• /
• pp.47-60
• /
• 1998

본 고에서는 지반 조건의 불균질성 및 이방성에 기인하는 사전 지반 조사의 한계성, 혹은 충분치 못한 사전 지반 조사에 의해 터널 시공 중 발생되었던 터널 사고 사례들을 검토, 분석하고 지반 조사의 터럴 설계 및 시공에서의 활용에 대하여 고찰하였다. 본문에서는 암석(intact rock) 자체는 양호할지라도 암반 내에 존재하는 불연속 면들의 발달 상태 등 지질공학적 요인에 의하여 암반이 취약해지는 경우, 지반 내에 발달하는 불연속면의 사전 인지와 이에 대한 대책 공법 수립의 필요성, 충분하지 못한 사전 지반 조사에 의해 터널 상부에 존재하는 충적층을 사전에 예측하지 못하여 발생된 사고 사례들과 시공 중 지반 조사(막장 관찰, 갱내 선진시추 조사 등) 결과가 터널의 시공에 적용된 예와 특수한 지반조건에서의 터널 변형 사례등을 검토하였다. 결론적으로 터널 시공에 있어서 대상 지반의 지질공학적 특성을 충분히 파악할 수 있는 적절한 지반 조사를 충실히 이행하면 지반 관련 사고를 미연에 방지할 수 있고 경제적인 시공이 될 수 있을 것으로 판단하였다.

• The Korean Journal of Pain
• /
• 제33권1호
• /
• pp.54-59
• /
• 2020

Background: The median nerve cross-sectional area (MNCSA) is a useful morphological parameter for the evaluation of carpal tunnel syndrome (CTS). However, there have been limited studies investigating the anatomical basis of median nerve flattening. Thus, to evaluate the connection between median nerve flattening and CTS, we carried out a measurement of the median nerve thickness (MNT). Methods: Both MNCSA and MNT measurement tools were collected from 20 patients with CTS, and from 20 control individuals who underwent carpal tunnel magnetic resonance imaging (CTMRI). We measured the MNCSA and MNT at the level of the hook of hamate on CTMRI. The MNCSA was measured on the transverse angled sections through the whole area. The MNT was measured based on the most compressed MNT. Results: The mean MNCSA was 9.01 ± 1.94 ㎟ in the control group and 6.58 ± 1.75 ㎟ in the CTS group. The mean MNT was 2.18 ± 0.39 mm in the control group and 1.43 ± 0.28 mm in the CTS group. Receiver operating characteristics curve analysis demonstrated that the optimal cut-off value for the MNCSA was 7.72 ㎟, with 75.0% sensitivity, 75.0% specificity, and an area under the curve (AUC) of 0.82 (95% confidence interval [CI], 0.69-0.95). The best cut off-threshold of the MNT was 1.76 mm, with 85% sensitivity, 85% specificity, and an AUC of 0.94 (95% CI, 0.87-1.00). Conclusions: Even though both MNCSA and MNT were significantly associated with CTS, MNT was identified as a more suitable measurement parameter.