• 상하수도학회지
• /
• 제20권2호
• /
• pp.289-294
• /
• 2006

A pilot scale non-woven fabric filter separation activated sludge system was investigated for practical application on domestic wastewater reclamation and reuse. The system was operated in A/O (Anaerobic/Oxic) process with submerged filter module in the aerobic compartment. In the test of two types of filter materials ($70g/m^2$ and $35g/m^2$), the initial flux (0.42m/d) could be maintained for about three months by regular air backwashing of $70g/m^2$ filter at 0.3m water head. The removal efficiency of organic matter by the system was BOD 93.3%, CODcr 96.3%, SS 96.7%. The effluent quality was 7.8mg/L, 12mg/L and 5mg/L for BOD, CODcr and SS, respectively. The water quality was enough to meet a standard for domestic reuse without human contact. T-N removal efficiency was 49.9% at internal recycle rate 2Q and C/N ratio 3.3. The removal efficiency of T-P was 50% with average effluent concentration, 2.6mg/L.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1365-1370
• /
• 2004

In this paper, a novel anti-sway control system that uses an inclinometer as a sway sensor is investigated. The inclinometer, when compared with a vision system, is very cheap, durable, and its maintenance is easy. However, it gives almost the same performance. Various observers for estimating the angular velocity of the load and the trolley velocity are presented. A state feedback controller with an integrator is designed. After a time-scale analysis, a 1/4-size pilot crane of the rail-mounted quayside crane is constructed. The performance of the proposed control system was verified with a real rubber-tired gantry crane at a container terminal as well as with the pilot crane constructed. Experimental results are provided.

• 멤브레인
• /
• 제7권1호
• /
• pp.31-38
• /
• 1997

유기물 탈수 공정에 적용되는 투과증발 시스템을 설계하기 위한 투과증발 시스템 모사기가 개발되었다. 모사기는 시스템 모델링 및 수치 해석 알고리즘과 관련된 simulation engine과 모사기를 Windows 환경에서 쉽게 사용할 수 있도록 한 Graphical User Interface(GUI)로 구성되었다. 모사기 구조 및 사용 방법 등을 실규모 에탄올 탈수 공정 모사를 통하여 구체적으로 설명하였으며, 모사 결과를 실제 에탄올 탈수 Pilot test에 의한 실험 결과와 비교함으로써 모사기 성능이 우수함을 입증하였다.

• International Journal of Control, Automation, and Systems
• /
• 제2권4호
• /
• pp.435-449
• /
• 2004

In this paper, a novel anti-sway control system that uses an inclinometer as a sway sensor is investigated. The inclinometer, when compared with a vision system, is very cheap, durable, and easy to maintain, while providing almost the same performance. A number of observers to estimate the angular velocity of the load and the trolley velocity are presented. A state feedback controller with an integrator is designed. After a time-scale analysis, a 1/4-size pilot crane of a rail-mounted quayside crane was constructed. The performance of the proposed control system was verified with a real rubber-tired gantry crane at a container terminal as well as with the constructed pilot crane. Experimental results are provided.

• 한국유체기계학회 논문집
• /
• 제17권3호
• /
• pp.41-45
• /
• 2014

The biological aerated filter (BAF) reactor is regarded as an effective biological wastewater treatment method. It can remove pollutants by carrier filtration and biodegradation. Due to its advantages, which include high biomass retention, tolerance to toxicity, excellent removal efficiency, and slurry separation, BAF has been widely used to remove COD, $NH_4{^+}-N$, phosphorus, and other harmful organic substances. In this study, the BAF reactor was used to remove organic contaminants of domestic wastewater of Korea at both the benchand pilot-scale. The main objectives of this study are to: (i) investigate the removal efficiency of organic contaminants (ex. COD, nitrate, phosphorus) in BAF reactors at both scales; (ii) characterize the small-scale wastewater treatment plant using the BAF reactor. The concentration of COD in the influent increased from 69 to 246 mg/L. During the operation period, the final effluent concentration of COD remained maximum 4.0 mg/L, and the average removal efficiency was above 88%. The present study investigated the removal efficiencies of COD, TN, TP and $NH_4{^+}-N$ from smelting wastewater by BAF system. When treating wastewater in both bench and pilot-scale reactors, the BAF worked well.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2006년도 에너지.가스.기후변화학회 연합춘계학술대회 및 특별심포지움
• /
• pp.189-193
• /
• 2006

• 한국수자원학회논문집
• /
• 제32권3호
• /
• pp.311-319
• /
• 1999

기존의 정수처리 공정인 응집 ·침전·모래여과를 단일 공정인 막분리 공정으로 대체하기 위한 중공사 정밀여과막의 적용 가능성을 검토하였다. 실험은 우선 실험실 규모의 실험에서 여러 가지 운전인자에 대한 수질의 안정성 및 장기 운전 가능성을 검토하였고, 여기에서 최적 운전인자로 얻어진 투과플럭스 0.03m/h, 10분 여과, 2분 정지 (30초간 air scrubbing 세정 포함)의 조건으로 20m3/일 규모의 Pilot Plant를 1년 이상 운전하여 안정성을 검증하는 방법으로 수행되었다. 탁도, SS등 막 투과수 수질은 전 실험 기간 동안 탁월한 제거효율을 나타내었다. 따라서 정수처리 공정에의 중공사 정밀여과막을 이용한 막분리 공정은 적용 가능하다고 판단된다.

• 자원환경지질
• /
• 제53권6호
• /
• pp.695-701
• /
• 2020

본 연구는 중성의 pH 조건에서 Fe, Mn, As이 포함된 복합오염수를 배출하는 광산배수의 수질특성을 모니터링하였다. 침출수를 처리하기 위해 모래와 석회석으로 이루어진 수직흐름반응조(VFR, Vertical Flow Reactor)와 제강슬래그와 석회석을 적용한 반응조(ZMR)로 구성된 현장파일럿 장치를 설치하여 약 6개월간 운영하였다. 광산배수 내 존재하는 Fe, Mn, As에 대한 현장파일럿 장치의 처리효율을 평가하였다. 중성의 알칼리 수질특성을 가진 D광산 침출수에 VFR와 ZMR 공정을 적용한 결과, pH와 알칼리도가 효과적으로 상승하여 Fe과 As가 99%이상 제거되었으며 Mn은 98%이상 제거하여 복합오염물질 처리가 가능함을 확인하였다. 본 연구결과를 통해 Fe, As, Mn이 포함된 소규모 광산배수에 자연정화기반의 공법이 적용가능함을 확인하였다.

• 한국환경보건학회지
• /
• 제39권3호
• /
• pp.289-299
• /
• 2013

Objectives: For the field application of the dielectric barrier discharge plasma reactor, scale-up of the plasma reactor is needed. This study investigated the possibility of inactivation of microorganisms in sewage using pilot multi-plasma reactor. We also considered the possibility of degradation of total organic carbon (TOC) and nonbiodegradable matter ($UV_{254}$) in sewage. Methods: The pilot plasma reactor consists of plasma reactor with three plasma modules (discharge electrode and quartz dielectric tube), liquid-gas mixer, high voltage transformers, gas supply equipment and a liquid circulation system. In order to determine the operating conditions of the pilot plasma reactor, we performed experiments on the operation parameters such as gas and liquid flow rate and electric discharge voltage. Results: The experimental results showed that optimum operation conditions for the pilot plasma reactor in batch experiments were 1 L/min air flow rate), 4 L/min liquid circulation rate, and 13 kV electric discharge voltage, respectively. The main operation factor of the pilot plasma process was the high voltage. In continuous operation of the air plasma process, residual microorganisms, $UV_{254}$ absorbance and TOC removal rate at optimal condition of 13 kV were $10^{2.24}$ CFU/mL, 56.5% and 8.6%, respectively, while in oxygen plasma process at 10 kV, residual microorganisms, $UV_{254}$ absorbance and TOC removal rate at optimal conditions were $10^{1.0}$ CFU/mL, 73.3% and 24.4%, respectively. Electric power was increased exponentially with the increase in high voltage ($R^2$ = 0.9964). Electric power = $0.0492{\times}\exp^{(0.6027{\times}lectric\;discharge\;voltage)}$ Conclusions: Inactivation of microorganisms in sewage effluent using the pilot plasma process was done. The performance of oxygen plasma process was superior to air plasma process. The power consumption of oxygen plasma process was less than that of air plasma process. However, it was considered that the final evaluation of air and oxygen plasma must be evaluated by considering low power consumption, high process performance, operating costs and facility expenses of an oxygen generator.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.429-447
• /
• 2020

The considered simulation tasks are based on an electrometallurgical process development strategy and associated telemanipulator simulation systems are proposed with various scales of experimental facilities. Fundamentally, target facilities are assumed to be operated only by remote handling systems because the considered process is operated in hazardous environments. Futhermore, the feasibility at various scales should be experimentally verified with gradual increase in throughput. In this regard, bench, engineering, and pilot-scale simulation systems are important early-stage tools for assessing the practical operability of the target process with the material handling systems. Such simulation systems are highly customized for applications and are a precursor to larger pilot and demonstration-scale plants. This paper introduced and classified the developed simulator systems for this approach at various scales using remote handling systems which were assembled inside a virtual target facility, and the manmachine interface was included for a more realistic operation of the simulator. The results obtained for each simulator show the feasibility and requirement for improvement of the systems for the considered test issues with respect to the operation and maintenance of the process.