• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.521-527
• /
• 2005

In the past decades, complain about ground vibration and noise induced by pile driving has been quickly increased. Because of that, auger drilled piling methods have frequently used specially in urban area. However, the present auger drilled piling methods induce inevitable ground disturbance as well as a certain degree of vibration and noise due to the final hammering. For these reasons, a new auger drilled piling method is required to be developed. This paper introduces PDT(Pulse Discharge Technology) piling method and presents the characteristics of bearing capacity. The PDT piling method is to install in-situ piles using electric power so called Pulse. The pile installed by PDT appears to be able to develop shaft and end bearing capacity efficiently.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1203-1208
• /
• 2007

In the past decades, complain about ground vibration and noise induced by pile driving has been quickly increased. Because of that, auger drilled piling methods have frequently used specially in urban area. However, the present auger drilled piling methods induce inevitable ground disturbance as well as a certain degree of vibration and noise due to the final hammering. For these reasons, a new auger drilled piling method is required to be developed. This paper introduces PDT(Pulse Discharge Technology) piling method and presents the characteristics of bearing capacity. The PDT piling method is to install in-situ piles using electric power so called Pulse. The pile installed by PDT appears to be able to develop shaft and end bearing capacity efficiently. This paper introduces PDT(Pulse Discharge Technology) piling method, which is the 512nd new construction technology. The PDT piling method is to install in-situ piles using electrical power so called Pulse power. The pulse power is physical value that indicates the energy change per unit time(dE/dt). Since the pulse power is to push ground, using the pulse power is enable a hole to be expanded as well as the ground to be improved by compaction. Therefore, The pile installed by PDT appears to be able to develop shaft and end bearing capacity efficiently. In this study, couples of pile loading tests were carried out to figure out whether or not the PDT piling method is applicable to constructions like rail road facility. As a result, it was concluded that the PDT piling technique meet the requirements for such a rail road related construction.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2004년도 제5회 정기학술발표대회 논문집
• /
• pp.317-322
• /
• 2004

도심지 건축 프로젝트가 초고층화, 대형화됨에 따라, 공사비와 공기의 관점에서 지하공사의 중요성은 점차 증가하고 있다. 지하공사 단계에서 대단히 중요한 것은 적정 말뚝공법을 선정하는 것이다. 그런데 말뚝공사의 경우, 공법 선정 시 고려해야 할 지반조건들이 많고, 불확실한 정보에 기반한 경험적인 공법선정이 이루어지기 때문에, 말뚝공법의 변경이 적지 않게 발생하며, 이것은 프로젝트의 공사비와 공기에 영향을 미친다 본 연구에서는 프로젝트의 설계단계에서 적정 말뚝공법을 선정하는데 활용하고, 시공전 단계에서 기 선정된 말뚝공법의 적정여부를 검증할 수 있는 말뚝공법 선정모델을 제안하였다. 실적데이터에 근간한 신경망 모델은 이미 그 효율성이 입증된 바 있다. 2000년부터 2004년까지 국내에서 시행된 150개의 데이터를 기초로 하여 말뚝공법 선정을 위한 신경망 모델을 개발하였다. 개발한 신경망 모델을 대상으로 학습용 자료에 의해 최적화를 실행하였으며, 그 유효성을 검증하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.231-238
• /
• 2000

Sand piling method is one of the most widely used methods to improve soft soils. There are several methods to install sand piles, but driven pile method is considered as one of the easiest method. This method simply pushes down the sand piles into soft soils, so that the excess pore pressure would be generated if the soil is saturated. This pore pressure acts as consolidation load. If the amount of sand pile induced pore pressure can be predicted in reasonable ways, the effects of sand piling to improve soft soils would be predicted, and the height of preload can be reduced. In this article, sand pile induced excess pressure was predicted by cavity expansion theory, and the predicted values were compared with the field measured values. The results showed fair agreements between the measured and the predicted excess pore pressure.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1995년도 가을 학술발표회 논문집
• /
• pp.1031-1040
• /
• 1995

Recently, a more strict regulation has become effective on ground vibration and noise induced by construction activities. Consequently the demand for the most widely used method of installing precast piles, i.e. driven piles, is declining. At the same time the demand for low noise and low vibration piling method increased sharply. Currently there are several different low noise and low vibration methods of installing precast piles, mostly preboring method. However, the actual level of ground vibration and noise of these method of construction has not yet been clearly understood. In this paper, through field measurement, suggestion has been made to meet the requirements of the revised regulation.

• 한국해안·해양공학회논문집
• /
• 제35권3호
• /
• pp.57-66
• /
• 2023

본 논문에서는 해상풍력발전단지의 경제성을 파악하고자 발전단가 측면에서 해상풍력 지지구조물 형식 및 시공 방법에 따른 균등화발전비용(levelized cost of energy, LCOE)의 차이를 분석하고 LCOE의 주요 구성 요소에 따른 민감도 분석을 실시하였다. 연구대상 현장으로 국내 서남해 해상풍력실증단지를 선정하였으며, 설치 기수에 따른 공사비를 분석하였다. LCOE 민감도 분석 결과 설비이용률, 터빈 관련 비용, 가중평균자본비용 그리고 BOS(balance of system) 관련 비용의 순서로 LCOE에 대한 민감도가 높은 것으로 나타났다. 아울러 국내 해상풍력 지지구조물로 주로 적용되었던 포스트파일링(post-piling) 재킷 공법을 기본안으로 선정하여 공사비를 산출한 후, 시공 방법을 프리파일링(pre-piling)으로 변경한 재킷 공법과 트라이포드(tripod) 공법의 초기투자비용을 비교하였다. 그에 따른 LCOE를 분석한 결과, 프리파일링 재킷 공법의 경우 고가의 템플릿이 필요하지만, 강재 소모량이 적고, 설치규모가 대형화할수록 시공 기간이 단축되어 전체 공사비 및 LCOE가 낮아지며 경제성이 향상되는 것을 확인하였다.

• 한국지반공학회지:지반
• /
• 제13권4호
• /
• pp.25-36
• /
• 1997

기존의 매입말뚝공법이 갖고 있는 문제들, 즉 지지력의 약화와 소음 진동의 발생을 해결하기 위하여 나선돌기형 매입말뚝공법과 선단확대형 매입말뚝공법을 개발하였다. 이들 공법의 시공성과 지지력 증대효과를 알아보기 위하여 현장시험을 실시하였다. 시험결과 극한지지력은 말뚝에 성형된 돌기에 의한 주면마찰력의 증가로 인하여 침설방식보다 약 44%증가하였으며, 주면마찰력은 돌기의 형상과 돌기간의 간격에 의하여 영향을 받는 것으로 밝혀졌다. 그리고 전체지지력에서 주면마찰력이 차지하는 비율은 침설방식의 경우가 74~80%이고 나선돌기 형과 선단확대형의 경우가 81~86% 매입말뚝의 지지력에서 선단지지력이 차지하는 비율은 매우 작았다. 또한 동일 하중에 대한 침하량을 비교한 결과 침설방식보다는 나선돌기형과 선단확대형 매입말뚝의 침하량이 작게 측정되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.559-566
• /
• 2008

This paper describes the state-of-the-art and -practice of embedded precast pile methods in Korea. The current status of embedded precast piling was reviewed in terms of its design, construction and quality assurance available for last decade in Korea. Based on the results obtained, some suggestions and authors' experience were proposed to design and construct the embedded precast pile foundations.

• 복식
• /
• 제59권5호
• /
• pp.41-52
• /
• 2009

In contemporary art, soft materials are used in various forms and ways as a medium expressing contingency beyond a simple nature of materials. In the late 1960's, the appearance of soft sculpture as a refusal of the stereotyped 'Erection' characteristic of traditional sculpture served as an opportunity for more attention to soft materials. Fashion is the reflection of age, and the mirror of society, culture and arts. In other words, soft sculpture and fashion are artistic behaviors in the same context, which have neither been fixed nor erected. This study finds its significance in analyzing correlation between soft sculpture and fashion, and the importance of contingency as artistic expression means in this age when boundaries between genres are obscure, and artistic values are given to fashion. By doing so, it aims to present the direction toward which fashion should face in the future, establishing a new aesthetic consciousness with which more creative and various expressions are available in fashion as well. This study presented as its theoretical background the concept of soft sculpture affected by Marcel Duchamp among representative examples of the contingency that started to appear in art starting in the early 20th century. It also analyzed the soft sculpture appeared in 1960s and the expression methods and features of contingency appeared in fashion after late 1990s through a new approach of piling up, hanging up, and tying, three categories classified by Maurice $Fr{\acute{e}}churet$. Common features of the contingency expressed in soft sculpture and fashion were derived in the analysis, which are intensive effects of energy, values given to physical properties themselves, and esthetics of anti-form.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.519-526
• /
• 2010

The construction site for $\bigcirc\bigcirc$ transformer substation was located at a mountain valley. In order to prepare the site, the valley was first filled with crushed rock debris up to 63m. Since the main concern of this project is to minimize differential settlement of the foundation of transformer facilities, dynamic compaction was performed every 7m followed by reinforcement with EMP(Ez-Mud Piling). The EMP is one of bored piling methods, in which a hole is bored by means of air percussion and maintain by injecting Ez-Mud. Then a PHC pile (Pretensioned spun High strength Concrete pile) is embedded and finalized with a hammer. In this study, bearing capacities and long term behavior of a pile installed by EMP were investigated. To achieve these objectives, a series of tests such as static and dynamic load tests were conducted. In addition, a construction quality control standard was proposed based on the test results.