• 한국전기전자재료학회논문지
• /
• 제24권7호
• /
• pp.543-546
• /
• 2011

We studied sintering temperature to enhance the piezoelectric properties of $0.98(Na_{0.5}K_{0.5})NbO_3-0.02Li(Sb_{0.17}Ta_{0.83})O_3$+0.01wt%ZnO (hereafter NKN-LST+ZnO) lead free piezoelectric ceramics. The synthesis and sintering method were the conventional solid state reaction method and sintering was executed at $1,080\sim1,120^{\circ}C$. We found that NKN-LST+ZnO ceramics at optimal sintering temperature showed the improved piezoelectric properties at the optimal sintering temperature. The NKN-LST+ZnO ceramics show good performance with piezoelectric constant $d_{33}$= 153 pC/N sintered at $1,090^{\circ}C$. The results reveal that NKN-LST+ZnO ceramics are promising candidate materials for lead-free piezoelectric application.

• 한국분말재료학회지
• /
• 제28권2호
• /
• pp.127-133
• /
• 2021

One-dimensional (1D) piezoelectric nanostructures are attractive candidates for energy generation because of their excellent piezoelectric properties attributed to their high aspect ratios and large surface areas. Vertically grown BaTiO₃ nanotube (NT) arrays on conducting substrates are intensively studied because they can be easily synthesized with excellent uniformity and anisotropic orientation. In this study, we demonstrate the synthesis of 1D BaTiO₃ NT arrays on a conductive Ti substrate by electrochemical anodization and sequential hydrothermal reactions. Subsequently, we explore the effect of hydrothermal reaction conditions on the piezoelectric energy conversion efficiency of the BaTiO₃ NT arrays. Vertically aligned TiO₂ NT arrays, which act as the initial template, are converted into BaTiO₃ NT arrays using hydrothermal reaction with various concentrations of the Ba source and reaction times. To validate the electrical output performance of the BaTiO₃ NT arrays, we measure the electricity generated from each NT array packaged with a conductive metal foil and epoxy under mechanical pushings. The generated output voltage signals from the BaTiO₃ NT arrays increase with increasing concentration of the Ba source and reaction time. These results provide a new strategy for fabricating advanced 1D piezoelectric nanostructures by demonstrating the correlation between hydrothermal reaction conditions and piezoelectric output performance.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.208-216
• /
• 2003

In this paper, a two-dimensional electroelastic analysis is performed on a piezoelectric material with an open crack. The approach of Lekhnitskii's complex potential functions is used in the derivation and Bueckner's weight function theory is extended to piezoelectric materials. The stress intensity factors and the electric displacement intensity factor are calculated by the weight function theory.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1378-1383
• /
• 2003

A ferroelectric (called piezoelectric afterwards) wafer has been widely used as a key component of actuators or sensors of a layer type. According to recent researches, the piezoelectric wafer behaves in a nonlinear way under excessive electro-mechanical loadings. In the present paper, one-dimensional constitutive equations for the nonlinear behavior of a piezoelectric wafer are proposed based on the principles of thermodynamics and a simple viscoplasticity theory. The predictions of the developed model are compared with experimental observations.

• 진공이야기
• /
• 제3권2호
• /
• pp.17-20
• /
• 2016

Piezoelectric nanogenerators are energy harvesting device to convert a mechanical energy into an electric energy using nanostructured piezoelectric materials. This review summarizes works to date on piezoelectric nanogenerators, starting with a basic theory of piezoelectricity and working mechanism, and moving through the reports of numerous nanogenerators using nanorod arrays, flexible substrates and alternative materials. A sufficient power generated from nanogenerators suggests feasible applications for either power supplies or strain sensors of highly integratedl nano devices. Further development of nanogenerators holds promise for the development of self-powered implantable and wearable electronics.

• 한국해양공학회지
• /
• 제24권3호
• /
• pp.59-63
• /
• 2010

In this paper, an electroelastic analysis is performed on a piezoelectric material with an open crack in anti-plane deformation. Bueckner’s weight function theory is extended to piezoelectric materials in anti-plane deformation. The stress intensity factors and electric displacement intensity factor are calculated by the weight function theory.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권4호
• /
• pp.396-411
• /
• 2014

Synchronized switch damping (SSD) techniques have recently been developed for structural vibration control using piezoelectric materials. In these techniques, piezoelectric materials are bonded on the vibrating structure and shunted by a network of electrical elements. These piezoelectric materials are switched according to the amplitude of the excitation force to damp vibration. This paper presents a new SSD technique called 'synchronized switch damping on negative capacitance and adaptive voltage sources' (SSDNCAV). The technique combines the phenomenon of capacitance transient charging and electrical resonance to effectively dampen the structural vibration. Also, the problem of stability observed in the previous SSD techniques is effectively addressed by adapting the voltage on the piezoelectric patch according to the vibration amplitude of the structure. Analytical expressions of vibration attenuation at the resonance frequency are derived, and the effectiveness of this new technique is demonstrated, for the control of a resonant cantilever beam with bonded piezoelectric patches, by comparing with SSDI, SSDVenh, and SSDNC techniques. Theoretical predictions and experimental results show the remarkable vibration damping capability of SSDNCAV technique, which was better than the previous SSD techniques. The broadband vibration control capabilities of SSDNCAV technique are also demonstrated, which exceed those of previous SSD techniques.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.199-206
• /
• 2005

In this work, a theoretical investigation on the energy harvesting is undertaken using one of potential smart materials; piezoelectric material. The energy equations fur both square and circular types of the piezoelectric material are derived, and the energy generated from two commercially available Products: $PZT (Lead/Zirconium/Titanium: Pb(Zr,\;Ti)O_3)$ and PVDF (polyvinylidene fluoride) are investigated in terms of the thickness and area. In addition, a finite element analysis (FEA) is undertaken to obtain the generated energy due to the uniform pressure applied on the surface of the piezoelectric materials. A comparative work between the theory and the FEA is made followed by the brief discussion on the usage of the harvested energy for Bio MEMS.

• 한국재료학회지
• /
• 제15권6호
• /
• pp.413-418
• /
• 2005

Perovskite $Pb(Ni_{1/3}Nb_{2/3})O_3-Pb(Zr,Ti)O_3[PNN-PZT]$ ceramics were synthesized by conventional ceramic processing technique. In order to modify piezoelectric properties for sensor application in this system, NiO addition was considered to provide $Ni^{+2}$ as an acceptor, which was known to occupy with B site in the structure. The effect of NiO addition up to $8\;mol\%$ on the following piezoelectric properties as well as sintering properties was investigated. When NiO added more than $1\;mol\%$, average grain size was decreased and second phase was found to form. Moreover, the second phase caused decrease in relative dielectric constant $(\varepsilon_{33}T/\varepsilon0)$, electro-mechanical coupling factor $(k_p)$, and piezoelectric charge constant $(d_{33})$, while increasing mechanical quality factor $(Q_m)$. When $1\;mol\%$ NiO was added, density, dielectric properties and piezoelectric properties were abruptly increased.

• Composites Research
• /
• 제34권6호
• /
• pp.357-372
• /
• 2021

에너지 수확장치는 석유자원의 고갈로 인한 자원난을 해결할 수 있는 대안으로 유망하다고 알려져 있다. 기계적 움직임을 전기 에너지로 전환할 수 있는 압전 소자들의 한계(환경오염 및 낮은 기계적 특성)를 극복하기 위하여, 고분자 기지재 기반 복합재료 압전 에너지 수확장치에 대한 많은 연구들이 수행되었다. 본 논문에서는 사용된 재료 및 공정에 기초하여, 보고된 압전 복합재료의 출력 성능 및 관련된 응용 분야를 검토하였다. 압전 필러는 티탄산 지르콘산 연 및 티탄산바륨 기반의 세라믹 필러뿐만 아니라, 친환경, 생체적합성 및 유연성 측면에서 유리한 산화아연을 검토하였다. 기지재는 폴리비닐리덴플로오라이드 및 공중합체로 구성된 압전 고분자 및 에폭시 및 폴리디메틸실록산 기반의 유연한 고분자로 분류하여 복합재료의 압전 시너지 및 높은 외력 적용에 의한 압전 출력 향상을 논의하였다. 또한, 금속 혹은 탄소 소재 기반 2차 필러의 적용에 의한 복합재료의 전도성 혹은 기계적 특성의 향상이 압전 수확장치의 출력 성능에 미치는 영향을 복합재료의 구조 측면에서 검토하였다. 향상된 성능으로 소형 전자기기, 스마트 센서, 의학 분야 등에 응용 가능한 복합재료 기반 압전 수확장치는 미래의 일상에서 접할 수 있는 무선 전자 장치의 전원으로써 잠재적인 통찰을 제공할 수 있다.