Browse > Article
http://dx.doi.org/10.5139/IJASS.2014.15.4.396

Piezoelectric shunt damping by synchronized switching on negative capacitance and adaptive voltage sources  

Qureshi, Ehtesham Mustafa (College of Aerospace Engineering, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics)
Shen, Xing (College of Aerospace Engineering, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics)
Chen, JinJin (College of Aerospace Engineering, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics)
Publication Information
International Journal of Aeronautical and Space Sciences / v.15, no.4, 2014 , pp. 396-411 More about this Journal
Abstract
Synchronized switch damping (SSD) techniques have recently been developed for structural vibration control using piezoelectric materials. In these techniques, piezoelectric materials are bonded on the vibrating structure and shunted by a network of electrical elements. These piezoelectric materials are switched according to the amplitude of the excitation force to damp vibration. This paper presents a new SSD technique called 'synchronized switch damping on negative capacitance and adaptive voltage sources' (SSDNCAV). The technique combines the phenomenon of capacitance transient charging and electrical resonance to effectively dampen the structural vibration. Also, the problem of stability observed in the previous SSD techniques is effectively addressed by adapting the voltage on the piezoelectric patch according to the vibration amplitude of the structure. Analytical expressions of vibration attenuation at the resonance frequency are derived, and the effectiveness of this new technique is demonstrated, for the control of a resonant cantilever beam with bonded piezoelectric patches, by comparing with SSDI, SSDVenh, and SSDNC techniques. Theoretical predictions and experimental results show the remarkable vibration damping capability of SSDNCAV technique, which was better than the previous SSD techniques. The broadband vibration control capabilities of SSDNCAV technique are also demonstrated, which exceed those of previous SSD techniques.
Keywords
damping; piezoelectric; shunt; switch;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Moheimani, S.O.R., "A survey of recent innovations in vibration damping and control using shunted piezoelectric transducers", IEEE Transactions on Control Systems Technology, Vol. 11, 2003, pp. 482-494. DOI:10.1109/TCST.2003.813371   DOI
2 Davis, C.L. and Lesieutre, G.A., "A modal strain energy approach to the prediction of resistivity shunted piezoceramic damping", Journal of Sound and Vibration, Vol. 184, No. 1 ,1995, pp. 129-139. DOI: 10.1006/jsvi.1995.0308   DOI   ScienceOn
3 Forward, R.L., "Electronic damping of vibrations in optical structures", Applied Optics, Vol.18, No. 5, 1979, pp. 690-697. DOI: 10.1364/AO.18.000690   DOI   ScienceOn
4 Hagood, N.W. and von Flotow, A., "Damping of structural vibrations with piezoelectric materials and passive electrical networks", Journal of Sound and Vibration, Vol. 146, No. 2, 1991, pp. 243-268. DOI: 10.1016/0022-460X(91)90762-9   DOI   ScienceOn
5 Qiu, J., Ji, H. and Zhu, K., "Semi-active vibration control using piezoelectric actuators in smart structures", Frontiers of Mechanical Engineering in China, Vol. 4, No. 9, 2009, pp. 242-251. DOI: 10.1007/s11465-009-0068-z   DOI
6 Wang, Y. and Inman, D.J., "A survey of control strategies for simultaneous vibration suppression and energy harvesting via piezoceramics", Journal of Intelligent Material Systems and Structures, Vol. 23, No. 18, 2012, pp. 2021-2037. DOI: 10.1177/1045389X12444485   DOI
7 Hagood, N.W. and Crawley, E.F., "Experimental investigations of passive enhancement of damping space structures", Journal of Guidance, Control and Dynamics, Vol. 14, No. 6, 1991, pp. 1100-1109. DOI: 10.2514/3.20763   DOI
8 Hollkamp, J.J., "Multimodal passive vibration suppression with piezoelectric materials and resonant shunts", Journal of Intelligent Material Systems and Structures, Vol. 5, No. 1, 1994, pp. 49-56. DOI: 10.1177/1045389X9400500106   DOI   ScienceOn
9 Law, H.H., Rossiter, P.L., Simon, G.P. and Koss, L.L., "Characterization of mechanical vibration damping by piezoelectric materials", Journal of Sound and Vibration, Vol. 197, No. 4, 1996, pp. 489-513. DOI:10.1006/jsvi.1996.0544   DOI
10 Behrens, S., Moheimani, S.O.R. and Fleming, A.J.,"Multiple mode current flowing passive piezoelectric shunt controller", Journal of Sound and Vibration, Vol. 266, Issue 5, 2003, pp. 929-942. DOI:10.1016/S0022-460X(02)01380-9   DOI
11 Richard, C., Guyomar, D., Audigier, D. and Ching, G., "Semi-passive damping using continuous switching of a piezoelectric device", In Proc. SPIE Conf. Passive Damping Isolation, Newport Beach, CA, Vol. 3672, 1999, pp. 104-111. DOI:10.1117/12.349773   DOI
12 Cunefare, K.A., "State-switched absorber for vibration control of point-excited beams", Journal of Intelligent Material Systems and Structures, Vol. 13, Issue 2-3, 2002, pp. 97-105. DOI:10.1177/104538902761402495   DOI
13 Clark, W.W., "Vibration control with state-switched piezoelectric materials", Journal of Intelligent Material Systems and Structures, Vol. 11, Issue 4, 2000, pp. 263-271. DOI: 10.1106/18CE-77K4-DYMG-RKBB   DOI
14 Richard, C., Guyomar, D. and Audigier, D., et al., "Enhanced semi-passive damping using continuous switching of a piezoelectric device on an inductor", In Proc. of SPIE Smart Structures and Materials 2000: Damping and Isolation, Vol. 3989, 2000, pp. 288-299. DOI:10.1117/12.384569   DOI
15 Guyomar, D., Richard, C. and L. Petit, L., "Non-linear system for vibration damping", 142nd Meeting of Acoustical Society of America, Fort Lauderdale, FL, 2001.
16 Onoda, J., Makihara, K. and Minesugi, K., "Energyrecycling semi-active method for vibration suppression with piezoelectric transducers", AIAA Journal, Vol. 41 No. 4, 2003, 711-719. DOI: 10.2514/2.2002   DOI   ScienceOn
17 Corr, L.R. and Clark, W.W., "A novel semi-active multimodal vibration control law for a piezoceramic actuator", Journal of Vibration and Acoustics, Vol. 125, Issue 2, 2003, pp. 214-222. DOI:10.1115/1.1547682   DOI
18 Petit, L., Lefeuvre, E., Richard, C. and Guyomar, D., "A broadband semi passive piezoelectric technique for structural damping", Proceedings of SPIE International Symposium on Smart Structure Materials: Damping and Isolation, Vol. 5386, 2004, pp. 414-425. DOI:10.1117/12.532716   DOI
19 Badel, A., Sebald, G. and Guyomar, D., et al., "Piezoelectric vibration control by synchronized switching on adaptive voltage sources: towards wideband semi-active damping", Journal of the Acoustical Society of America, Vol. 119, No. 5, 2006, pp. 2815-2825. DOI: 10.1121/1.2184149   DOI   ScienceOn
20 Lefeuvre, E., Badel, A. and Petit, L., et al., "Semipassive piezoelectric structural damping by synchronized switching on voltage sources", Journal of Intelligent Material Systems and Structures, Vol. 17, Issue 8-9, 2006, pp. 653-660. DOI: 10.1177/1045389X06055810   DOI
21 Neubauer, M. and Wallaschek, J., "Analytical and experimental investigation of the frequency ratio and switching law for piezoelectric switching techniques", Smart Materials and Structures, Vol.17, Issue 3, 2008, pp. 035003 (9pp). DOI:10.1088/09641726/17/3/035003   DOI
22 Ji, H., Qiu, J. and Badel, A., et al., "Semi-active vibration control of a composite beam by adaptive synchronized switching on voltage sources based on LMS algorithm", Journal of Intelligent Material Systems and Structures, Vol. 20, Issue 8, 2009, pp. 939-947. DOI: 10.1177/1045389X08099967   DOI
23 Ji, H., Qiu, J. and Zhu, K., et al., "Multi-modal vibration control using a synchronized switch based on a displacement switching threshold", Smart Materials and Structures, Vol. 18, Issue 3, 2009, pp. 035016 (8 pp). DOI:10.1088/0964-1726/18/3/035016   DOI
24 Ji, H., Qiu, J., Zhu, K. and Badel, A., "Two-mode vibration control of a beam using nonlinear synchronized switching damping based on the maximization of converted energy", Journal of Sound and Vibration, Vol. 329, Issue 14, 2010, pp. 2751-2767. DOI:10.1016/j.jsv.2010.01.012   DOI
25 Ji, H., Qiu, J. and Xia, P., "Analysis of energy conversion in two-mode vibration control using synchronized switch damping approach", Journal of Sound and Vibration, Vol. 330, Issue 15, 2011, pp. 3539-3560. DOI: 10.1016/j.jsv.2011.03.004   DOI
26 Mokrani, B., Rodrigues, G., Ioan, B., Bastaits, R. and Preumont, A., "Synchronized switch damping on inductor and negative capacitance", Journal of Intelligent Material Systems and Structures, Vol. 23, No. 18, 2012, pp. 2065-2075. DOI: 10.1177/1045389X11433493   DOI
27 Qureshi, E.M., Shen , X. and Chen J.J., "Vibration control laws via shunted piezoelectric transducers: A review", International Journal of Aeronautical and Space Sciences, Vol. 15, No. 1, 2014, pp. 1-19. DOI:10.5139/IJASS.2014.15.1.1   DOI
28 Ji, H., Qiu, J., Cheng, J. and Inman, D., "Application of a negative capacitance circuit in synchronized switch damping techniques for vibration suppression", Journal of Vibration and Acoustics, Vol. 133, Issue 4, 2011, pp. 041015-1-10. DOI:10.1115/1.4003146   DOI
29 Ji, H., Qiu, J., Badel, A. and Zhu, K., "Semi-active vibration control of a composite beam using an adaptive SSDV approach", Journal of Intelligent Material Systems and Structures, Vol. 20, Issue 4, 2009, pp. 401-412. DOI: 10.1177/1045389X08095182   DOI
30 Han, X., Neubauer, M. and Wallaschek, J., "Improved piezoelectric switch shunt damping technique using negative capacitance", Journal of Sound and Vibration, Vol. 332, Issue 1, 2013, pp. 7-16. DOI: 10.1016/j.jsv.2012.08.001   DOI
31 Horowitz, P. and Hill, W., The Art of Electronics, Cambridge University Press, New York, 1996.
32 Riodan, R.H.S., "Simulated inductors using differential amplifiers", Electronic Letter, Vol. 3, No. 2, 1967, pp. 50-51. DOI: 10.1049/el: 19670039   DOI