• 한국방사선학회논문지
• /
• 제11권5호
• /
• pp.353-359
• /
• 2017

대표적인 저강도 초음파 자극 기술인 음파영동은 초음파의 물리적 진동과 온열 효과를 이용하여 약물을 인체 표피 내부로 전달시키는 기법이다. 음파영동법은 치료 약물 전달의 효율을 높일 수 있으며, 인슐린이나 지질 등 분자 크기가 비교적 큰 약물의 전달에도 효과적이라는 장점을 갖는다. 본 연구에서는 효율적인 음파영동 치료를 위하여 대면적 단일 진동소자와 치료 부위에 약물 이송 기능을 갖는 복합 구조 초음파 변환기 어셈블리를 제안하였다. 또한, 치료 부위의 온도를 상승 및 유지시킬 수 있는 변환기 어셈블리 구조를 제안하고 유효성을 평가하였다. 본 연구에서 제안된 변환기 어셈블리는 지속적으로 정량의 약물을 제공하고, 가온을 통하여 약물 전달을 보조함으로써 초음파를 이용한 음파영동 시술의 효율을 향상시킬 수 있을 것으로 사료된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.869-873
• /
• 2004

[ $Sr_xBa_{1-x}Nb_2O_6$ ] (SBN, $0.25{\leq}x{\leq}0.75$) ceramic is a ferroelectric material with tetragonal tungsten bronze (TTB) type structure, which has a high pyroelectric coefficient, piezoelectric, and a photo refractive properties. In this study, SBN60(x=0.6) thin film was manufactured by ion beam sputtering technique. Using the prepared SBN60 target in $Ar/O_2$ atmosphere as-deposited SBN60 thin film on Pt(100)/$TiO_2/SiO_2/Si$ substrate crystallization and orientation behavior as well as electric properties of SBN60 thin film were examined. SBN60 deposition up to $3000{\AA}$ in thickness, SBN60 thin film was heat-treated at $650^{\circ}C{\sim}800^{\circ}C$. The orientation was shown primarily along (001) plane from XRD pattern where working pressure was $4.3{\times}10^{-4}$ torr. The deposited layer was uniform, preferred orientatin and crystallization behavior resulted in the change of $O_2$ ratio was observed. In electric propertie of Pt/SBN60/Pt thin film capacitor remnant polarization (2Pr) value was $10{\mu}C/cm^2$, the coercive filed (Ec) 50 kV/cm, and the dielectric constant 615, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.351-358
• /
• 2006

The capability of high pressure injection with small fuel quantify at all engine operating conditions is one of the main feature in common rail fuel injection system, which is used in small and light-duty Diesel engine. The key parameter for the better atomized fuel sprays and multiple injections of this common rail fuel injection control, that can be freely selected irrespective of the engine speed and load is the mechanism controlling the needle energizing and movement in high pressure Diesel injector. In the electro-hydraulic injector, the injection nozzle is being opened and closed by movement of the injector's needle which is balanced by pressure between the nozzle seat and the needle control chamber. This study describes the macroscopic spray structure characteristics of the common rail Diesel injectors with different electric driving method i.e. the solenoid-driven and piezo-driven type. The macroscopic spray characteristics such as spray tip speed. spray tip penetration and spray cone angle were investigated by the high speed spray, which is measured by the back diffusion light illumination method with optical system for the high speed temporal photography in a constant volume chamber pressurized by nitrogen gas. As the results, the prototype piezo-driven injector system was designed and fabricated for the first time in domestic case and the effect of injector's needle response driven by different drive type was compared between the solenoid and piezo-driven injector It was found therefore. that the piezo-driven injector showed faster needle response and had better needle control capability by altering the electric input value than the solenoid-driven injector.

• 한국결정성장학회지
• /
• 제5권2호
• /
• pp.135-141
• /
• 1995

마이크로파 (2.45 GHz) 에너지를 이용한 PZT계 세라믹스의 소결특성과 전기적 특성을 조사하였다. 소결은 $1050 ~ 1130^{\circ}C$ 범위에서 5분간 행하였다. 소결온도가 높아질수록 소결밀도가 높은 치밀한 소결체를 얻을 수 있었으며, 전기적 특성이 증가하는 경향을 보였다. 그러나 소결온도가 $1090^{\circ}C$이상으로 증가하게 되면 PbO의 휘발로 인하여 소결밀도가 감소하였으며, 이에 따라 유전율과 전기기계결합계수 값도 감소하였다. PbO 분위기 조절없이 마이크로파로 $1090^{\circ}C$에서 소결한 시편의 전기적 특성은 유전율, 기계적품질계수, 전기기계결합계수 등의 값이 각각 1900, 80, 0.53으로 일반적인 전기로에 의한 소결과 비교하여, 비슷한 특성을 나타내었다. 마이크로파 에너지를 이용하여 소결공정을 20분 안에 끝마칠 수 있는 급속소결법으로 공정시간과 에너지를 크게 절감할 수 있었다.

• 대한기계학회논문집B
• /
• 제30권6호
• /
• pp.553-559
• /
• 2006

Most diesel injector, which is currently used in high-pressure common rail fuel injection system of diesel engine, is driven by the solenoid coil energy for its needle movement. The main disadvantage of this solenoid-driven injector is a high power consumption, high power loss through solenoid coil and relatively fixed needle response's problem. In this study, a prototype piezo-driven injector, as a new injector mechanism driven by piezoelectric energy based on the concept of inverse piezo-electric effect, has been designed and fabricated to know the effect of piezo-driven injection processes on the diesel spray structure and internal nozzle flow. Firstly we investigated the spray characteristics in a constant volume chamber pressurized by nitrogen gas using the back diffusion light illumination method for high-speed temporal photography and also analyzed the inside nozzle flow by a fully transient simulation with cavitation model using VOF(volume of fraction) method. The numerical calculation has been performed to simulate the cavitating flow of 3-dimensional real size single hole nozzle along the injection duration. Results were compared between a conventional solenoid-driven injector and piezo-driven injector, both equipped with the same micro-sac multi-hole injection nozzle. The experimental results show that the piezo-driven injector has short injection delay and a faster spray development and produces higher injection velocity than the solenoid-driven injector. And the predicted simulation results with the degree of cavitation's generation inside nozzle for faster needle response In a piezo-driven injector were reflected to spray development in agreement with the experimental spray images.

• 한국세라믹학회지
• /
• 제41권1호
• /
• pp.30-35
• /
• 2004

스크린 인쇄법 및 PZT sol 처리의 복합공정을 적용하여 $30{\mu}m$ 두께의 PMW-PZT 후막을 Pt/$TiO_2$/$SiN_x$Si 기판위에 제작하였다. 그 결과 PZT sol 처리 횟수가 증가함에 따라 후막의 소결 밀도가 증가하고 전기적, 압전 특성의 증진되는 것을 관찰할 수 있었다. $800^{\circ}C$에서 소결한 10회 sol 처리한 PMW-PZT 후막은 745의 유전상수 및 155 pC/N의 $d_33$ 값을 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제29권12호
• /
• pp.764-768
• /
• 2016

To investigate excess $Na^+$ effect, $Bi_{0.5}(Na_{0.78+x}K_{0.22})_{0.5}TiO_3$ ($0{\leq}x{\leq}0.05$) (BNKT) ceramics were prepared by using a conventional solid-state reaction method. The structure and ferroelectric properties of BNKT ceramics were characterized by XRD (X-ray diffraction) and polarization dependence by external electric field. Also, the temperature dependence of dielectric constant and loss were studied. From these results, it was found that appropriate excess $Na^+$ into BNKT ceramics compensate the volatility and induce dense ceramics. The enhanced piezoelectric coefficient (158 pC/N) and depolarization temperature ($202^{\circ}C$) were obtained for the x=0.01 composition.

• Advances in materials Research
• /
• 제5권2호
• /
• pp.93-105
• /
• 2016

KNN-based ceramics modified with small amounts of $Bi_4Zr_3O_{12}$ (BiZ) has been synthesized using high-throughput experimentation (HTE). The results from X-ray diffraction show that for samples with base composition $(K_{0.5}Na_{0.5})NbO_3$ (KNN), the phase present changes from orthorhombic to pseudo-cubic with more than 0.2 mol% BiZ addition; for samples with base composition $(K_{0.48}Na_{0.48}Li_{0.04})(Nb_{0.9}Ta_{0.1})O_3$ (KNNLT), the phase present changes from a mixture of orthorhombic and tetragonal symmetry to pseudo-cubic with more than 0.4 mol % while for samples with base composition $(K_{0.48}Na_{0.48}Li_{0.04})(Nb_{0.86}Ta_{0.1}Sb_{0.04})O_3$ (KNNLST), the phase present is tetragonal with <0.3 mol% BiZ addition and transforms to pseudo-cubic with more dopant addition. The microstructures of the samples show that addition of BiZ decreases the average grain size and increases the volume of pores at the grain boundaries. The values of dielectric constant for KNN and KNNLT compositions increase slightly with BiZ addition while that for KNNLST decreases gradually with BiZ addition. The dielectric loss values are between 0.02 and 0.04 for KNNLT and KNNLST compositions while they are ~ 0.05 for KNN samples. The resistivity values increases with BiZ addition and values in the range of $10^{10}{\Omega}cm$ and $10^{12}{\Omega}cm$ are obtained. The piezoelectric charge coefficient ($d{^*}_{33}$) is highest for KNNLST samples and decreases gradually from ~400 pm/V to ~100 pm/V with BiZ addition.

• 대한전기학회논문지
• /
• 제41권8호
• /
• pp.858-868
• /
• 1992

0.085Ba(LaS11/2TNbS11/2T)OS13T-0.915Pb(ZrS1yTTiS11-yT)OS13T (0.45$\leq$y$\leq$0.65) transparent electrooptic ceramics were fabricated by two-stage sintering method. The structural, ferroelectric and electrooptic properties were investigated varying composition and second sintering time. Also the possibility of application to electrooptic device was studied. If we increase the PbZrOS13T contents, dielectric constants were increased and Curie temperature was decreased. In the composition of 0.55[mol] PbZrOS13T, electromechanical coupling factor and piezoelectric charge constant were the highest values of 43[%] and 173x10S0-12T[C/N], respectively. Mechanical quality factors were decreased with the increasing PbZrOS13T contents. Light transmittance was increased with wavelength when measured from 300[nm] to 900[nm], and with PbZrOS13T contents in the range of 0.50[mol]-0.65[mol], and had the highest value of 67[%] in the composition of 0.65[mol] PbZrOS13T. From the results of ferroelectric hysteresis loop and transmitted light intensity with electric field, the specimens with compositions of 0.65,0.60,0.55[mol] PbZrOS13T were applicable to electrooptic memory device and those with compositions of 0.50,0.45[mol] PbZrOS13T were applicable to linear electrooptic device.

• 폴리머
• /
• 제28권5호
• /
• pp.361-366
• /
• 2004

가해준 하중에 따라 폴리(비닐리덴 플루오라이드) (PVDF) 필름에서 발생하는 전압을 측정하며 분포형 촉각센서로서의 특성을 연구하였다. PVDF 필름에 전기장과 온도를 달리하면서 극화 (poling)의 변화를 주었고 이에 따른 필름의 압전성을 나타내는 $\beta$-결정상의 피크를 FT-IR. DSC와 XRD를 사용하여 확인하였다. 본 연구에서 사용된 온도와 전압의 영역에서는 극화 온도가 증가함에 따라 그리고 극화 전압이 증가함에 따라 $\beta$-결정상은 증가하였으며, 이에 따라 유전상수가 역시 증가하였다. 8$\times$8어레이 (array)로 제작된 촉각센서에 힘을 가하여 극화에 따른 전압 발생량을 측정한 결과, 극화가 많이 된 시편의 경우 높은 전압이 발생하는 것을 확인하였다.