• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.780-786
• /
• 2007

Statement of problem. The performance and maintenance of implant-supported prostheses are primarily dependent upon load transmission both at the bone-to-implant interface and within the implant-abutment-prosthesis complex. The design of the interface between components has been shown to have a profound influence on the stability of screw joints. Purpose. The Purpose of this study was to compare the strength and the fatigue resistance of 1-piece and 2-piece abutment connected to oral implant, utilizing an internal conical interface. Material and methods. Twenty $Implatium^{(R)}$ tapered implants were embedded to the top of the fixture in acrylic resin blocks. Ten $Combi^{(R)}$(1-piece) and $Dual^{(R)}$(2-piece) abutments of the same dimension were assembled to the implant, respectively. The assembled units were mounted in a testing machine. A load was applied perpendicular to the long axis of the assemblies and the loading points was at the distance of 7mm from the block surface. Half of 1-piece and 2-piece abutment-implant units were tested for the evaluation of the bending strength, and the others were cyclically loaded for the evaluation of the fatigue resistance until plastic deformation occurred. Nonparametric statistical analysis was performed for the results. Results. Mean plastic and maximum bending moment were $1,900{\pm}18Nmm,\;3,609{\pm}106Nmm$ for the 1-piece abutment, and $1,250{\pm}31Nmm,\;2,688{\pm}166Nmm$ for the 2-piece abutment, respectively. Mean cycles and standard deviation when implant-abutment joint showed a first plastic deformation were $238,610{\pm}44,891$. cycles for the 1-piece abutment and $9,476{\pm}3,541$ cycles for the 2-piece abutment. A 1-piece abutment showed significantly higher value than a 2-piece abutment in the first plastic bending moment (p<.05), maximum bending moment (p<.05) and fatigue strength (p<.05). Conclusion. Both 1-piece and 2-piece conical abutment had high strength and fatigue resistance and this suggests long-term durability without mechanical complication. However, the 1-piece conical abutment was more stable than the 2-piece conical abutment in the strength and the fatigue resistance.

• Steel and Composite Structures
• /
• 제43권3호
• /
• pp.363-373
• /
• 2022

As a key reinforcement connection between a tower and a substructure in offshore wind turbine system, the transition piece is inevitably subjected to cyclic dynamic environmental loads such as wind, current and wave. Therefore, well designed transition piece with high strength and good fatigue resistance is of great significance to the structural safety and reliability of offshore wind power systems. In this study, the structural behavior of the transition piece was studied by an extensive sets of finite element analyses. Three widely used types of transition piece were considered. The characteristics of stress development, fatigue life and weight depending on the type of the transition piece were investigated in the ultimate limit state (ULS) and the fatigue limit state (FLS) of a 5-MW offshore wind turbine to be placed in Korea. An optimal form of the transition piece was proposed based on this parametric study.

• 한국의상디자인학회지
• /
• 제17권1호
• /
• pp.167-182
• /
• 2015

This study was to investigate the preference tendency by detail and material preference of summer one-piece dresses for the children, and evaluation standard of children's wear in purchasing one-piece dresses as an object of mothers who have girls as buying representatives of children's wear in order to supply real information of design about the one-piece dresses for the girls in accordance with the consumers' demands. The results of this study revealed that the one-piece dress was favorite one to them in purchasing their summer wear. This study showed tendency that the more the mother's fashion interest was, the more the mother's preference on the one-piece dress was. As to the material preference of one-piece dress, it preferred the natural fiber to the synthetic fiber much, and the preferred customer order in purchasing one-piece dresses for their children was analyzed as activity, material, design collar, and pattern. As to the preference by form factor of one-piece dress, it preferred A-line silhouette in the silhouette, natural waist in the waist position, 5~7cm from the knee in the length of one-piece dress, and flared skirt in shape of skirt. The preference on the collar type was soutien collar, and the preference on the neckline type was round neckline. In addition, the preference on sleeve form was shirtsleeve, and the preference on trimming was lace trimming.

• 자동차안전학회지
• /
• 제10권3호
• /
• pp.13-19
• /
• 2018

This research is to optimize Single-Piece Side otr reinforcement using Hot-stamping and to strengthen weak regions on Single-Piece Side otr reinforcement. As a consequence, the weight and the number of parts were reduced and resulting in improvement of impact and stiffness performance when compared to multi-piece construction.

• Design & Manufacturing
• /
• 제9권1호
• /
• pp.31-35
• /
• 2015

Recently, life expectancy increased in the development of medicine, the need for health has increased. Market for medical equipment is growing rapidly to an increase in the interest in health and aging worldwide. It is a device intended for ultra sensitive cleavage process of bone during joint replacement surgery on a technical advanced surgery, finishing, and hole. Domestic demand of the hand piece is a necessary condition on an ongoing basis. However, hand piece was made on the basis of the experience of many years in the country Japan, Germany, and the United States has spread to more than 90% domestic market. Feel the need for the development of the hand piece in the country, many companies are trying to in-house production hand piece. In an attempt to solve the problems with the hand piece of the present, in this paper, it was supposed to be a study of rechargeable hand piece to replace the existing pneumatic.

• 패션비즈니스
• /
• 제15권2호
• /
• pp.12-22
• /
• 2011

The purpose of this study is to evaluate the differences of visual image on variations in the shoulder strap and length of the one piece swimsuit. Nine samples were examined: 3 variations of the shoulder strap and 3 variations of the swimsuit length. Data have been obtained from 90 fashion design majors and analyzed using Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study are as follows: 1) The visual image, according to changes in the shoulder strap and length of the one piece swimsuit, was composed of attraction factor and boldness factor. Attraction was the most important factor in the one piece swimsuit. 2) The visual images according to changes in the shoulder strap of the one piece swimsuits are ranked in the order of one shoulder strap, strapless and two shoulder straps. They are shown to be wanted to dress - sophisticated image and untidy - unique image. 3) As the swimsuit gets shorter, it has more wanted to dress - sophisticated image and untidy - unique image. 4) The number of shoulder straps and swimsuit length do interact with each other in attraction factor and boldness factor. In attraction factor, one shoulder strap and high cut of the one piece swimsuit has the most wanted to dress - sophisticated image. However two shoulder straps and low cut of the one piece swimsuit has the most not wanted to dress - countrified image. In boldness factor, one shoulder strap and high cut of the one piece swimsuit has the most untidy - unique image. However two shoulder straps and regular cut of the one piece swimsuit has the most tidy - ordinary image.

• 한국의상디자인학회지
• /
• 제24권1호
• /
• pp.15-33
• /
• 2022

The purpose of this study was to categorize the decorative characteristics of the Rococo Age, which displays the most glamorous and elegant decorative beauty, in architecture, interior decorations, paintings, and patterns, and to analyze these characteristics and graft them onto art masks in a modern way. Piece I is a mixed media piece that based its motif on the ceilings and pulpits of the German Vis Pilgrimage Church, which is representative architecture of the Rococo Age. It was glamorously produced using gold and cubic zirconia. Piece II is also a mixed media piece that borrowed its motif from the exterior and gazebo of the Sanssouci Palace in Germany, another representative piece of architecture from the Rococo Age, and it was produced to clearly display the image of the Sanssouci Palace, using emerald and ivory. Piece III applies the furniture trends of the Rococo Age. Curves in S and C shapes, which can often be found in Chinese furniture, along with dark backgrounds, common in portrait paintings, were applied to give a sense of weight and dignity. Piece IV is an application of the fabric patterns of the Rococo Age. Continuous patterns of flowers and greenery stems were drawn on the mask to recreate the fabric patterns of the age. Piece V used the painting 'Swing' of the Rococo Age as its inspiration. Lace and ribbon decorations were used to emphasize feminine beauty and express the loveliness of the woman that appears in the painting. Piece VI borrows from the painting 'Madame de Pompadour' of the Rococo Age and the clothing worn by Pompadour. This piece grafted colors and themes through the painting and expressed a fusion of the dresses of Pompadour and lace that is clearly displayed in the architecture, paintings, clothing, interior decorations, and patterns of the Rococo Age, along with the rocaille (asymmetrically shaped decorations that resemble clams), flowers, leaves, stems, and Chinoiserie styles. These motifs clearly display the decorative characteristics of the age and these were grafted them onto art masks, confirming that it is possible to create new designs.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.69-74
• /
• 2003

This study evaluated durability through measurement of substituted test piece's pH degree and experiments of neutralization. Comparing and evaluating cared test piece's pH degrees which we got before the neutralization and after the neutralization. After evaluating neutralization depth through neutralization, evaluating neutralization properties by Fly Ash replacement ratio. pH degree was decreased by cement replacement ratio of Fly Ash. And in the case of substitution of the same amount of Fly Ash, fine aggregate replacement ratio was increased. When the test piece, which had been cared in high temperature, was promoted to neutralization, Among the test piece which was replaced with Fly Ash 40%, the test piece which has high rate of fine aggregate proved opposition of neutralization Through the test, Ⅰ summarized that the test piece cared in high temperature was mostly effected by compress strength, the test piece cared in low temperature was mostly effected by pH degree.

• 한국의류학회지
• /
• 제30권9_10호
• /
• pp.1344-1353
• /
• 2006

The purpose of this research is to investigate the actual wearing conditions of working uniform and identify problems for the aircraft mechanic. For this study, questionnaire surveys were conducted dividing according to styles of clothing; one-piece and two-piece styles. Subjects were 343 men working in flight line. Questionnaire of 159 two-piece styles and 184 one-piece ones were used in analysis. The results of the study are as follows; The result about wearing each type of working uniform showed that the two-piece one is always as the air force uniform, whereas the one-piece one is worn only a few times. They felt inconvenience during all operations except in the sitting position, crawling position, and positions in which they were using tools. Accordingly, the result of the functionality reported dissatisfaction on all question items. Therefore, uniform of two-piece style achieved better results on all questions related to motional flexibility and functionality. Questions on changes to finishing methods showed that each airline employed different methods for both two-pieced and one-pieced uniforms. The answers about the unstitched or worn-out parts of the two-piece garments showed that pants were unstitched on the inner seam of the trouser leg and hip regions, but the upper one was not. In case of the one-pieced uniform, the parts of wearing out is the seam of hip and the unstitched parts are knee region and hem line of pants. Questions concerning their satisfaction with the material of uniforms indicated a high rate of dissatisfaction, particularly in its ventilation and absorbency. Questions concerning the preferred design of working uniform indicated a preference for two-piece uniform rather than one-piece ones.

• 한국정보통신학회논문지
• /
• 제8권5호
• /
• pp.1020-1027
• /
• 2004

기존의 2D 패션 디자인 시스템은 도식화 피스 기반 디자인 기능이 미성숙 단계로서 도식화 피스데이터베이스 구축이 미약하여 활용하는데 많은 한계를 가지고 있다. 본 논문에서는 패션디자인에 필요한 가장 기본이 되는 도식화 피스별 데이터베이스를 설계 및 구축하고 데이터베이스 검색 및 수정 모듈을 개발함으로써 도식화 피스 데이터를 쉽게 관리하여 경쟁력 있고 효율적인 디자인을 창출할 수 있게 하였다.