• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권8호
• /
• pp.2199-2213
• /
• 2024

To enhance the quality of defect detection for Printed Circuit Board Assembly (PCBA) during electronic product manufacturing, this study primarily focuses on optimizing the YOLOv7-based method for PCBA defect detection. In this method, the Mish, a smoother function, replaces the Leaky ReLU activation function of YOLOv7, effectively expanding the network's information processing capabilities. Concurrently, a Squeeze-and-Excitation attention mechanism (SEAM) has been integrated into the head of the model, significantly augmenting the precision of small target defect detection. Additionally, considering angular loss, compared to the CIoU loss function in YOLOv7, the SIoU loss function in the paper enhances robustness and training speed and optimizes inference accuracy. In terms of data preprocessing, this study has devised a brightness adjustment data enhancement technique based on split-filtering to enrich the dataset while minimizing the impact of noise and lighting on images. The experimental results under identical training conditions demonstrate that our model exhibits a 9.9% increase in mAP value and an FPS increase to 164 compared to the YOLOv7. These indicate that the method proposed has a superior performance in PCBA defect detection and has a specific application value.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.1080-1099
• /
• 2019

A better tradeoff between robustness and invisibility will be realized by using the just noticeable (JND) model into the quantization-based watermarking scheme. The JND model is usually used to describe the perception characteristics of human visual systems (HVS). According to the research of cognitive science, HVS can adaptively extract the structure features of an image. However, the existing JND models in the watermarking scheme do not consider the structure features. Therefore, a novel JND model is proposed, which includes three aspects: contrast sensitivity function, luminance adaptation, and contrast masking (CM). In this model, the CM effect is modeled by analyzing the direction features and texture complexity, which meets the human visual perception characteristics and matches well with the spread transform dither modulation (STDM) watermarking framework by employing a new method to measure edge intensity. Compared with the other existing JND models, the proposed JND model based on structural regularity is more efficient and applicable in the STDM watermarking scheme. In terms of the experimental results, the proposed scheme performs better than the other watermarking scheme based on the existing JND models.

• Nuclear Engineering and Technology
• /
• 제42권3호
• /
• pp.259-270
• /
• 2010

New generation nuclear reactors are designed using advanced safety analysis methods. A thorough understanding of different interacting physical phenomena is necessary to avoid underestimation and overestimation of consequences of off-normal transients in the reactor safety analysis results. This feature requires a multiphysics reactor simulation model. In this context, a coupled dynamics model based on a multiphysics formulation is developed indigenously for the transient analysis of large pressurized VVER reactors. Major simplifications are employed in the model by making several assumptions based on the physics of individual phenomenon. Space and time grids are optimized to minimize the computational bulk. The capability of the model is demonstrated by solving a series of international (AER) benchmark problems for VVER reactors. The developed model was used to analyze a number of reactivity transients that are likely to occur in VVER reactors.

• Structural Engineering and Mechanics
• /
• 제42권3호
• /
• pp.363-381
• /
• 2012

This study is aimed at providing an efficient analytical model to obtain pressure- impulse diagram of one-way reinforced concrete slabs subjected to different shapes of air blast loading using single degree of freedom method (SDOF). A tri-linear elastic perfectly plastic SDOF model has been used to obtain the pressure-impulse diagram to correlate the blast pressure and the corresponding concrete flexural damage. In order to capture the response history for the slab, a new approximately SDOF method based on the conventional SDOF method is proposed and validated using published test data. The influences of pulse loading shape on the pressure-impulse diagram are studied. Based on the results, a pressure-impulse diagram generation method using SDOF and an analytical equation for the pressure-impulse diagram is proposed to different damage levels and different blast loading shapes.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.279-286
• /
• 2000

Magnetic field dependence of magnetization reversal in Co/Pt multilayers has been quantitatively investigated. Serial samples of Co/Pt multilayers have been prepared by dc-magnetron sputtering under various Ar pressure. Magnetization reversal was monitored by magnetization viscosity measurement and direct domain observation using a magneto-optical microscope system, and the wall-motion speed and the nucleation rate R were determined using a domain reversal model based on time-resolved domain reversal patterns. Both and R were found to be exponentially dependent on the reversing applied field. From the exponential dependencies, the activation volumes of the wall motion and nucleation could be determined based on a thermally activated relaxation model, and the wall-motion activation volume was revealed to be slightly larger than the nucleation activation volume.

• Journal of Magnetics
• /
• 제5권4호
• /
• pp.116-119
• /
• 2000

Magnetic field dependence of magnetization reversal in Co/Pt multilayers was quantitatively investigated. Serial samples of Co/Pt multilayers were prepared by dc-magnetron sputtering under various Ar pressures. Magnetization reversal was monitored by magnetization viscosity measurement and direct domain observation using a magneto-optical microscope system, and the wall-motion speed V and the nucleation rate R were determined using a domain reversal model based on time-resolved domain reversal patterns. Both V and R were found to be exponentially dependent on the applied reversing field. From the exponential dependencies, the activation volumes for wall motion and nucleation could be determined, based on a thermally activated relaxation model, and the wall-motion activation volume was found to be slightly larger than the nucleation activation volume.

• 지구물리와물리탐사
• /
• 제26권4호
• /
• pp.268-274
• /
• 2023

유한 단층 미끌림 역산에는 지진 변위 측지 자료와 그린 함수 행렬(Green's function matrix)을 주로 사용한다. 그린 함수 행렬은 일반적으로 오카다 모형(Okada, 1985)을 기반으로 한다. 그러나 최근 물리 기반 지진 모델링을 활용하여 그린 함수 행렬을 제작하고 유한 단층 미끌림 역산을 수행하는 연구가 활발하다. 물리 기반 지진 모델링은 다양한 물성(탄성, 점탄성, 탄소성 등)을 고려하여 현실적인 환경에서 지진을 모사할 수 있다는 장점이 있다. 물리 기반 유한요소 소프트웨어 PyLith는 단층을 구성하는 절점을 두 개로 나누어 지진을 모사할 수 있으므로 지진 모사 모델링에 적합하다. 하지만 PyLith는 격자망 생성 기능을 자체 제공하지 않아, 모형 내부에 수십~수백 개의 소단층과 관측점을 설정해야 하는 유한 단층 미끌림 역산 수행에는 어려움이 있다. 본 연구에서는 소단층과 관측점을 포함한 수치 모형을 제작하고, 지진 모사 모델링을 수행하여 그린 함수 행렬을 제작하는 일련의 과정을 연계하여 유한 단층 미끌림 역산의 편리성을 높이기 위해 CPInterface (COMSOL-PyLith Interface)를 개발하였다. CPInterface는 COMSOL의 격자 생성 능력과 PyLith의 지진 모사 능력을 결합하여 그린 함수 행렬을 자동으로 생성할 수 있다. CPInterface는 간단한 변수들로 모형 및 단층 정보를 조절할 수 있고, 지하 탄성 이상체와 GPS 관측점을 자유롭게 배치할 수 있다. 또한, 그린 함수 행렬을 생성하는 복잡한 과정을 간소화하여 더욱 편리하게 유한 단층 미끌림 역산을 할 수 있게 한다.

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.968-976
• /
• 2019

This paper presents a number of verification case studies for a recently developed sensitivity/uncertainty code package. The code package, ROMUSE (Reduced Order Modeling based Uncertainty/Sensitivity Estimator) is an effort to provide an analysis tool to be used in conjunction with reactor core simulators, in particular the Virtual Environment for Reactor Applications (VERA) core simulator. ROMUSE has been written in C++ and is currently capable of performing various types of parameter perturbations and associated sensitivity analysis, uncertainty quantification, surrogate model construction and subspace analysis. The current version 2.0 has the capability to interface with the Design Analysis Kit for Optimization and Terascale Applications (DAKOTA) code, which gives ROMUSE access to the various algorithms implemented within DAKOTA, most importantly model calibration. The verification study is performed via two basic problems and two reactor physics models. The first problem is used to verify the ROMUSE single physics gradient-based range finding algorithm capability using an abstract quadratic model. The second problem is the Brusselator problem, which is a coupled problem representative of multi-physics problems. This problem is used to test the capability of constructing surrogates via ROMUSE-DAKOTA. Finally, light water reactor pin cell and sodium-cooled fast reactor fuel assembly problems are simulated via SCALE 6.1 to test ROMUSE capability for uncertainty quantification and sensitivity analysis purposes.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2708-2715
• /
• 2021

The Multi-Purpose Overload Robot (CMOR) is a key subsystem of China Fusion Engineering Test Reactor (CFETR) remote handling system. Due to the long cantilever and large loads of the CMOR, it has a large rigid-flexible coupling deformation that results in a poor position accuracy of the end-effector. In this study, based on the Levenberg-Marquardt algorithm, the spatial grid, and the linearized variable load principle, a variable parameter compensation model was designed to identify the parameters of the CMOR's kinematics models under different loads and at different poses so as to improve the trajectory tracking accuracy. Finally, through Adams-MATLAB/Simulink, the trajectory tracking accuracy of the CMOR's rigid-flexible coupling model was analyzed, and the end position error exceeded 0.1 m. After the variable parameter compensation model, the average position error of the end-effector became less than 0.02 m, which provides a reference for CMOR error compensation.

• Current Optics and Photonics
• /
• 제8권2호
• /
• pp.127-137
• /
• 2024

The distribution of tags is an important factor that affects the performance of radio-frequency identification (RFID). To study RFID performance, it is necessary to obtain RFID tags' coordinates. However, the positioning method of RFID technology has large errors, and is easily affected by the environment. Therefore, a new method using optical measurement is proposed to achieve RFID performance analysis. First, due to the possibility of blurring during image acquisition, the paper derives a new image prior to removing blurring. A nonlocal means-based method for image deconvolution is proposed. Experimental results show that the PSNR and SSIM indicators of our algorithm are better than those of a learning deep convolutional neural network and fast total variation. Second, an RFID dynamic testing system based on photoelectric sensing technology is designed. The reading distance of RFID and the three-dimensional coordinates of the tags are obtained. Finally, deep learning is used to model the RFID reading distance and tag distribution. The error is 3.02%, which is better than other algorithms such as a particle-swarm optimization back-propagation neural network, an extreme learning machine, and a deep neural network. The paper proposes the use of optical methods to measure and collect RFID data, and to analyze and predict RFID performance. This provides a new method for testing RFID performance.