• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.8
• /
• pp.3841-3861
• /
• 2017

Virtualized small cell network is a promising architecture which can realize efficient utilization of the network resource. However, conventional full duplex self-backhauls lead to residual self-interference, which limits the network performance. To handle this issue, this paper proposes a virtual resource allocation, in which the residual self-interference is fully exploited by employing a physical-layer network coding (PNC) aided self-backhaul scheme. We formulate the features of PNC as time slot and information rate constraints, and based on that, the virtual resource allocation is formulated as a mixed combinatorial optimization problem. To solve the problem efficiently, it is decomposed into two sub problems, and a two-phase iteration algorithm is developed accordingly. In the algorithm, the first sub problem is approximated and transferred into a convex problem by utilizing the upper bound of the PNC rate constraint. On the basis of that, the convexity of the second sub problem is also proved. Simulation results show the advantages of the proposed scheme over conventional solution in both the profits of self-backhauls and utility of the network resource.

• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.657-663
• /
• 2019

In this work, we study physical and mechanical properties of oxide films formed on AZ91D magnesium alloy by plasma anodization at different temperatures. It is found that the higher the electrolyte temperature, the lower is the breakdown voltage of oxide layer. This is probably because films formed at higher temperatures are thinner and denser. Moreover, electrolyte temperature plays an important role in the physical properties of the films. As the electrolyte temperature increases from 20 to $50^{\circ}C$, the hardness of the oxide layer increases. Friction test against steel balls indicates that wear scars become narrower for films formed at higher temperatures because the films are harder, as indicated by the Vickers hardness. The thinner and denser nature of the oxide film formed at $50^{\circ}C$ is also advantageous for heat transfer when film is used as a heat sink. Laser flash test results show very fast heat transfer for AZ91D with plasma anodized oxide layer formed at higher temperatures.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.6
• /
• pp.2094-2114
• /
• 2022

Due to the wide application of fifth generation communication, wireless sensor networks have become an indispensable part in our daily life. In this paper, we analyze physical layer security for two-way relay with energy harvesting (EH), where power splitter is considered at relay. And two kinds of combined methods, i.e., selection combining (SC) and maximum ratio combining (MRC) schemes, are employed at eavesdropper. What's more, the closed-form expressions for security performance are derived. For comparison purposes, this security behaviors for orthogonal multiple access (OMA) networks are also investigated. To gain deeper insights, the end-to-end throughput and approximate derivations of secrecy outage probability (SOP) under the high signal-to-noise ratio (SNR) regime are studied. Practical Monte-Carlo simulative results verify the numerical analysis and indicate that: i) The secure performance of SC scheme is superior to MRC scheme because of being applied on eavesdropper; ii) The secure behaviors can be affected by various parameters like power allocation coefficients, transmission rate, etc; iii) In the low and medium SNR region, the security and channel capacity are higher for cooperative non-orthogonal multiple access (NOMA) systems in contrast with OMA systems; iv) The systematic throughput can be improved by changing the energy conversion efficiency and power splitting factor. The purpose of this study is to provide theoretical direction and design of secure communication.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.4
• /
• pp.29-35
• /
• 2022

We fabricated MHOS (multi-HTS layers on one substrate) high-temperature superconducting (HTS) REBCO conductors using HTS REBCO coated conductor (CC) A-specimen, which induces an artificial magnetic flux pinning effect, and HTS REBCO CC B-specimen, that does not induce this effect. The superconducting magnetic properties of the fabricated MHOS conductors were examined by measuring their magnetic moment m(H) curves using a physical property measurement system (QD PPMS-14). The critical current density (J_c) characteristics of our four-layered MHOS HTS REBCO conductor specimens such as BAAB, BBBB, and AAAA were lower than those of their two-layered and three-layered counterparts. At a temperature T of 30 K the magnetic flux pinning physical indicator δ values (obtained from the relationship J_c ∝ H^-δ) of the three-layer ABA (δ = 0.35) and two-layer AB (δ = 0.43) specimens were found to be significantly lower than those of the four-layer ABBA (δ = 0.51), BAAB (δ = 0.60), AAAA (δ = 0.78) and BBBB (δ = 0.81) structures.

• ETRI Journal
• /
• v.45 no.2
• /
• pp.213-225
• /
• 2023

Physical layer security (PLS) can improve the security of both terrestrial and nonterrestrial wireless communication networks. This study proposes a simplified framework for nonterrestrial cyclic prefixed orthogonal variable spreading factor (OVSF)-encoded multiple-input and multiple-output nonorthogonal multiple access (NOMA) systems to ensure complete network security. Various useful methods are implemented, where both improved sine map and multiple parameter-weighted-type fractional Fourier transform encryption schemes are combined to investigate the effects of hybrid PLS. In addition, OVSF coding with power domain NOMA for multi-user interference reduction and peak-toaverage power ratio (PAPR) reduction is introduced. The performance of $\frac{1}{2}$-rated convolutional, turbo, and repeat and accumulate channel coding with regularized zero-forcing signal detection for forward error correction and improved bit error rate (BER) are also investigated. Simulation results ratify the pertinence of the proposed system in terms of PLS and BER performance improvement with reasonable PAPR.

• The Journal of Korean Physical Therapy
• /
• v.13 no.2
• /
• pp.281-292
• /
• 2001

This study was performed to investigate the effect of therapeutic exercise on brain-derived neurotrophic factor manifestation after global brain ischemia in rats. Nine rats with global ischemia were divided at random into two group. In the control group, three rats remained in cage. But, in the end, two rats were alive. In the therapeutic exercise group, six rats remained. The five rats of this group was swam for 30 minutes everyday for a week. The brain-derived neurotrophic factor expression was identified from immunohistochemistry. The results of this study were as follows : 1. In the control group, a little expression of brain-derived neurotrophic factor was observed at cortex and hippocampus layer, but cell body and axon was observed obscurely. 2. In the experimental group, a much expression of brain-derived neurotrophic factor was observed at cortex and hippocampus layer, and cell body and axon was observed clearly. In the neurological examination(beam-walking test). experimental group was obtained higher 1.4 points than control group. BDNF expression was increased by swimming for 30 minutes everyday for a week. Therefore, therapeutic exercise contribute to brain plasticity after brain ischemia.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.733-738
• /
• 2016

We calculate optical properties of guided modes of a hybrid-guiding photonic crystal fiber. The design and modeling of such hybrid-guiding PCF is made by replacing air holes with inserts of high refractive index material layer by layer in order. The optical properties such as mode intensity profile, mode dispersion, optical birefringence, confinement loss, and chromatic dispersion during transition of the guiding mechanism are analyzed and discussed. The guided modes in the hybrid-guiding region are also compared with those of reference index-guiding and bandgap-guiding photonic crystal fibers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.121-124
• /
• 2004

We have grown GaN layers with in-situ SiN mask by metal organic chemical vapor deposition(MOCVD) and study the physical properties of the GaN layer. We have also investigate the effect of the SiN mask on its optical property. By inserting a SiN mask, (102) the full width at half maximum(FWHM) decreased from 480 arcsec to 409 arcsec. The PL intensity of GaN with SiN mask improved 2 times to that without SiN mask. We have thus shown that the SiN mask improved significantly the physical and optical properties of the GgN layer.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.148-165
• /
• 2017

Mural paintings drawn inside ancient tombs are very sensitive to changes in the environment such as temperature and humidity, especially the finish layer of the tomb murals differ in preservability depending on the material properties and humidity conditions. In this study, I examined the mural painting of Songsan-ri Tomb No.6, where the finish layer was made of earth, and identified the physical changes that can occur due to drying, depending on the material properties of the finish layer. I found out through particle size analysis that the finish layer of the mural painting in Songsan-ri Tomb No.6 is about 85.0wt% below silt, about 14.0wt% clay therein, mostly composed of silt and below clay. I also found out through physical property evaluation that surface change rate of samples showed the largest change at 15.5% in reproduced finish layer sample made up of bentonite, followed by 7.8% of reproduced finish layer sample made up of celadon soil, 6.3% of reproduced finish layer sample made up of loess, 6.2% of reproduced finish layer sample composed of white clay and the same order of change in appearance was confirmed in each sample consisted of soil. In addition, it showed the same trend of surface change rate, and the bentonite condition showed the largest change, in the measurement of shrinkage rate and expansion rate. The experiment shows that the finish layer composed of soil is affected by cohesion among particles according to the content of fine parts and the relationship between the agglomeration due to the content of the differentiated part and the stress due to the expansibility depending on the kind of the clay mineral etc. Therefore, it can be concluded that the physical damage occurred in the mural painting finish layer of the Songsan-ri Tomb No.6 is related to the factors such as the material characteristics of the soil and the highly humid environmental change inside the tomb.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.135-142
• /
• 2012

DSRC system is a communication system that consists of road side equipment and on board equipment to provide services of communication technology for intelligent transportation systems. In this paper, we carry out a short-range dedicated high-speed wireless communications via DSRC system based on board equipment that is installed in the vehicle and road side equipment through wireless channels of communication. on board equipment is system that have a memory which initialization information is stored, it loads physical layer and MAC layer, LLC layer, L7 layer in turn. In the upper, it should analyze the various commands that are sent from roadside base stations, and carry out the operation which is in accordance with the command. and also it designs the structure of protocol stack which is TRM Layer loaded that is to initialize on L7 layer and MAC layer and efficiently designs operation between on board equipment and the road side equipment.