• 폴리머
• /
• 제38권5호
• /
• pp.557-565
• /
• 2014

Sodium alginate and chitosan are added to a $CaCl_2$ solution to prepare calcium-alginate-chitosan and calciumalginate gels. After dehydration through stoving, two types of adsorbent particles are obtained. The adsorption process of the particles obtained for low concentrations of $Sr^{2+}$ satisfies a second-order kinetic equation and the Freundlich adsorption model. The thermodynamic behaviors of the particles indicate that adsorption occurs via a spontaneous physical process. XPS pattern analysis is used to demonstrate the adsorption of $Sr^{2+}$ by calcium alginate and chitosan. By building an interaction model of the molecules of chitosan and alginate with $Ca^{2+}$ and $Sr^{2+}$ to calculate energy parameters, Fukui index, Mulliken charge, and Mulliken population, adsorption of $Sr^{2+}$ on the molecular chains of chitosan as well as the boundary of calcium-alginate-chitosan is observed to show weak stability; by contrast, adsorption between molecular chains is high.

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.201-204
• /
• 2009

$BaTiO_3/SrTiO_3$ and $PbTiO_3/PbZrO_3$ superlattice thin films were fabricated on $Pt/Ti/SiO_2/Si$ substrate by the pulsed laser deposition process. The morphologies and physical properties of deposited films were characterized by using X-ray diffractometer, HR-SEM, and Impedance Analyzer. XRD data and SEM images of the films indicate that each layer was well deposited alternatively in the superlattice structure. The dielectric constant of $BaTiO_3/SrTiO_3$ superlattice thin film was higher than that of individual $BaTiO_3$ or $SrTiO_3$ film. Same result was obtained in the $PbTiO_3/PbZrO_3$system. The dielectric constant of a superlattice film was getting higher as the number of layer is increased.

• Journal of Electrochemical Science and Technology
• /
• 제4권1호
• /
• pp.27-33
• /
• 2013

The consequences of electrode density and thickness for electrochemical performance of lithium-ion cells are investigated using 2032-type coin half cells. While the cathode composition is maintained by 90:5:5 (wt.%) with $LiCoO_2$ active material, Super-P electric conductor and polyvinylidene fluoride polymeric binder, its density and thickness are independently controlled to 20, 35, 50 um and 1.5, 2.0, 2.5, 3.0, 3.5 g $cm^{-3}$, respectively, which are based on commercial lithium-ion battery cathode system. As the cathode thickness is increased in all densities, the rate capability and cycle life of lithium-ion cells become significantly worse. On the other hand, even though the cathode density shows similar behavior, its effect is not as high as the thickness in our experimental range. This trend is also investigated by cross-sectional morphology, porosity and electric conductivity of cathodes with different densities and thicknesses. This work suggests that the electrode density and thickness should be chosen properly and mentioned in detail in any kinds of research works.

• 과학교육연구지
• /
• 제45권1호
• /
• pp.1-10
• /
• 2021

본 연구에서는 TIMSS 2019 물상과학 영역과 우리나라 과학과 교육과정의 연계성을 분석하고자 하였다. TIMSS 2019 초등학교 4학년 과학 평가틀의 물상과학 영역에서는 12개의 주제가 제시되는데, 초중등학교 교사로 이루어진 현장교사와 과학교육 전문가 총 12명이 참여하여 이 주제들이 우리나라 2009 개정 및 2015 개정 과학과 교육과정에서 어느 학년에 포함되어 있는지 분석하였다. TIMSS 2019 평가틀의 성취기준과 우리나라 과학과 교육과정이 일치하는지 분석한 결과, TIMSS 2019 물상과학 평가 주제 중에서 우리나라 초등학교 4학년 교육과정까지 전혀 다루고 있지 않는 주제로 화학과 관련 있는 '일상생활에서 화학 변화', '열전도', '전기와 간단한 전기회로' 내용이 두드러졌다. TIMSS 2019 평가틀이 국제 성취 기준임을 고려하면 우리나라 교육과정에 대한 시사점을 제안할 수 있으며, 다음과 같다. 첫째, 차기 과학과 교육과정 개발에서는 누리과정까지 연계하여 초·중학교 및 고등학교 화학의 내용과 범위가 전체적으로 연결되도록 현재 초등학교 3학년부터 시작하는 과학과 교육과정을 초등학교 1학년부터 시작하는 개선을 공론화할 필요가 있다. 둘째, 학습량 및 학습 수준의 적합성 문제를 고려하면서 난이도를 조정하거나 개념을 다양한 교수학습 방법으로 접근하면서 관련 주제를 다루도록 학년군을 재조정하는 방안을 생각할 수 있다. 셋째, 국제적인 흐름에 맞게 필수적인 개념 및 표준 용어들을 우리나라 과학과 교육과정에 도입하거나 구성되도록 하는 논의가 필요하다.

• Bulletin of the Korean Chemical Society
• /
• 제29권10호
• /
• pp.1993-1997
• /
• 2008

In the present work, Diels-Alder reaction of cyclopentadiene with ethylacrylate has been carried out by using two types of mesoporous solid acid catalysts (Al-MCM-41, Al-MCM-48) with different pore structures. The specific topology of Al-MCM-48 (cubic Ia3d structure composed of two independent 3-D channel systems) exhibit higher activity and stereo-control than those of Al-MCM-41 (hexagonal packing of 1-D channels). The physical properties of Al-MCM-48 catalyst, such as high accessibility of reactants to the acid sites, spatial confinement in the nanoscopic reactors, and 3-D channel network structure that are effective adsorption and diffusion of reactants, play a crucial role in the present study.

• 한국토양비료학회지
• /
• 제42권별호
• /
• pp.28-52
• /
• 2009

• Toxicological Research
• /
• 제24권4호
• /
• pp.315-320
• /
• 2008

Recombinant human granulocyte-macrophage colony stimulating factor (hGM-CSF) is a glycoprotein and hematopoietic growth factors that regulates the proliferation of myeloid precursor cells and activates mature granulocytes and macrophages. In a previous study, we reported that hGM-CSF could be produced in transgenic rice cell suspension culture, termed rhGM-CSF. In the present study, we examined the repeated dose toxicity of rhGM-CSF in SD rats. The repeated dose toxicity study was performed at each dose of 50 and 200 ${\mu}g/kg$ subcutaneous administration of rhGM-CSF everyday for 28-days period. The results did not show any changes in food and water intake. There were also no significant changes in both body and organ weights between the control and the tested groups. The hematological and blood biochemical parameters were statistically not different in all groups. These results suggest that rhGM-CSF may show no repeated dose toxicity in SD rats under the conditions.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1403-1409
• /
• 2018

In the present study, the $SrMoO_4:Eu^{3+}$ phosphors has been synthesized through hydro-thermal co-precipitation method, and single factor and orthogonal experiment method was adopted to find optimal synthesis condition. It is interesting to note that hydro-thermal temperature is a prominent effect on the luminescent intensity of $SrMoO_4:Eu^{3+}$ red phosphor, followed by co-precipitation temperature, calcining time, and the doping amount of $Eu^{3+}$. The optimal synthesis conditions were obtained: hydro-thermal temperature is $145^{\circ}C$, co-precipitation temperature is $35^{\circ}C$, the calcining time is 2.5 h, and the doping amount of activator $Eu^{3+}$ is 25%. Subsequently, the crystalline particle size, phase composition and morphology of the synthesized phosphors were evaluated by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). The results show that these phosphors possess a scheelite-type tetragonal structure, and the particle size is about $0.2{\mu}m$. Spectroscopic investigations of the synthesized phosphors are carried out with the help of photo-luminescence excitation and emission analysis. The studies reveal that $SrMoO_4:Eu^{3+}$ phosphor efficiently convert radiation of 394 nm-592 and 616 nm for red light, and the luminescence intensity of $SrMoO_4:Eu^{3+}$ phosphors is improved. $SrMoO_4:Eu^{3+}$ phosphors may be a potential application for enhancing the efficiency of white LEDs.

• 대한화학회지
• /
• 제24권5호
• /
• pp.371-379
• /
• 1980

테트라히드로퓨란(THF)-물 혼합용매에서 용매화된 전자($e^-_s$)를 생성시켜 광흡수스펙트럼의 성질을 연구하였다. 본 연구에서 $e^-_s$는 nsec Q 스위치 Nd(YAG) 레이저 에너지 (265nm)를 이용한 광분해법으로 생성시켰다. 이 방법은 실험부분에서 도면으로 간단하게 기술되어 있다. 측정한 $e^-_s$의 최대흡수 파장은 THF의 함량과 온도에 따라 장파장쪽으로 이동하였고, 흡수스펙트럼의 폭 역시 THF에 따라 증가하였다. $e^-_s$의 반감기 또한 THF의 몰%에 따라 증가하였다. 혼합용매에서 최대 흡수파장은 순수한 물이나 THF에서 방사선 분해법을 측정한 흡수파장의 중간에서 모두 발견되었다. 이러한 실험 결과로부터 $e^-_s$의 체적과 최대흡수에너지 관계를 논의할 수 있었다.

• Elastomers and Composites
• /
• 제24권4호
• /
• pp.276-289
• /
• 1989

This study deals with both effects of inorganic fillers to vulcanized rubbers such as NR, CR, EPDM, NBR & SBR and inorganic characteristics of domestic fillers in comparision with hard clay produced in the USA. The results were as follows. 1. Main ingredient of domestic clay "Ha-dong clay" was Halloysite, "No-ha Island" was Pyrophyllite with $\alpha$-Quartz, and both of "Hard clay" & "Hwa-soon clay" were proved to be Kaolinite by XRD, DT-TGA and chemical analysis by XRF. 2. Tensile strength value of SBR compounded with these fillers, was Hard clay $146kg\;f/cm^2$, Kaolinite $123kg\;f/cm^2$, Pyrophyllite $82kg\;f/cm^2$, Halloysite $80kg\;f/cm^2$, precipitated $CaCO_3\;27kg\;f/cm^2$, and ground $CaCO_3$ was $21kg\;f/cm^2$. These results showed the increase of seven times according to filler species. 3. The physical properties of non-crystalline rubbers, such as SBR, NBR & EPDM, compared with NR & CR, have been considerably changed according to crystalline phase, particle size, shape and surface structure of fillers. Especially, tensile strength value in case of SBR & EPDM, was differentiated about 1.5 times by the particle size of fillers. 4. In SBR, physical properties of rubber compounded with Kaolinite which was surface treated with fatty acid and silane, almost approach to the value of hard clay. 5. Delayed cure time of Kaolinite and decrease of rubber properties by $CaCO_3$ can be improved by blending kaolinite & $CaCO_3$ in the ratio of 2:1.