• 한국환경복원기술학회지
• /
• 제14권6호
• /
• pp.87-95
• /
• 2011

This study investigates Youl Chon Industrial Complex 1 by dividing into three regions : the drainage site, the area inside the complex, and the seaside. Then each region was subdivided into three areas resulting in a total of nine areas for soil sampling and analysis. After analyzing the physical and chemical properties of the soil, all nine area's pH and EC readings indicated that the soil condition is not suitable for vegetation growth (according to the previous study, the pH level was 5.8 and EC was 2.0dS/m). Therefore, for Youl Chon Industrial Complex 1 to become green, the neutralization and reduction of pH and EC level is needed; first, vegetation through dredging soil, and second, introduction of halophytes is suggested. This study finds out that vertical changes in physical and chemical properties of soils in reclaimed sites are very variable and the result depends on surrounding environments, so it suggested the basic data for building vegetation or reclaimed sites. However, the additional study aiming at various reclaimed sites is required as this study was conducted only to limited areas, and this study has left monitoring analysis as the follow-up task to check the relations between a plant community and soils.

• 대한기계학회논문집B
• /
• 제34권2호
• /
• pp.157-163
• /
• 2010

고체산화물연료전지는 세라믹 물질로 이루어지며, 세라믹 물질의 물성치는 작동조건에 따라 달라진다. 따라서, 높은 신뢰성을 가지는 시뮬레이션 모델을 개발하기 위해서는 세라믹 물질의 물성치를 정확하게 예측할 수 있어야한다. 본 논문에서는 고체산화물연료전지의 성능에 영향을 미치는 여러가지 물성치를 선택하고 그 물성치를 위한 시뮬레이션 모델이 개발되었다. 개회로전압을 위한 깁스에너지, 활성화손실을 위한 교환전류밀도, 저항손실을 위한 전기전도도가 계산되었다. 또한, 다공성 전극 내부의 물질전달 해석을 위해서 분자확산과 누센확산을 함께 고려하는 유효확산계수가 계산되었다. 이러한 계산과정 후에 물성치 모델과 전기화학반응 모델이 동시에 시뮬레이션 되었다. 해석코드의 검증을 위해서 전산해석 결과는 실험결과 및 Chan 등에 의해서 수행된 이전 연구결과와 비교되었다.

• 펄프종이기술
• /
• 제41권1호
• /
• pp.30-36
• /
• 2009

Cracking of scored or creased lines on boards is a serious problem in converting process of corrugated fiberboard. It is important to reduce the possibility of score crack in advance by controlling the related quality factors of linerboard. To find out the key properties affecting score crack, we carried out the correlation analysis between score crack and physical properties of linerboards. Score crack was evaluated by visual rating on surface crack after folding a linerboard using laboratory folding resistance tester. Thickness of linerboard was the most important factor to score crack. The critical limits of thickness and strain can be determined by correlation analysis for reducing the possibility of score crack.

• 한국염색가공학회지
• /
• 제12권2호
• /
• pp.79-88
• /
• 2000

Draw textured yarns have many differences with yarn quality as well as wearing, due to the bulkiness, thermal and physical properties according to the false twist texturing system. In order to improve such property, many studies have been accomplished for developing good textured yarns and their fabrics, but these have been essentially obtained by experimental data or mathematical analysis. This study surveyed various properties of DTY produced by false twist texturing system, namely pin and crossed-belt false twist insertion systems. And 6 yarn specimens of 2 group(pin twisting type, belt twisting type) were measured and analysed.

• 한국결정학회지
• /
• 제12권4호
• /
• pp.227-232
• /
• 2001

Structure-physical properties relationships for Aurivillius ceramics are discussed, with empha-sis in symmetry considerations. Single-crystal materials and polycrystal ceramics are analysed. Electric and magnetic coupling properties are considered. Colour Symmetry Groups and Texture Analysis tool are emploed. Symmetry conditions for polarisation vectors and inverse pole figures related to Aurivillius phases are given. The influence of crystallographic texture of the physical properties of polycrystalline Aurivillius ceramics is evaluated.

• 천문학회보
• /
• 제36권1호
• /
• pp.59.2-59.2
• /
• 2011

Constraining physical (or stellar population) properties - such as stellar mass, star-formation rate, stellar population age, and dust-extinction - of galaxies from observation is crucial in the study of galaxy evolution. This is very challenging especially for high-redshift galaxies, and a widely-used method to estimate physical properties of high-redshift galaxies is to compare their photometric spectral energy distributions (SEDs) to spectral templates from stellar population synthesis models. I will show that the SED-fitting results of high-redshift galaxies are strongly dependent on the assumed forms of star-formation histories. I will also present the results of SED-fitting analysis of observed Lyman-break galaxies which show that parametric models with gradually increasing star-formation histories provide better estimates of physical parameters of high-redshift (z>3) star-forming galaxies than traditionally-used exponentially declining star-formation histories. This result is also consistent with the predictions from the modern galaxy formation models.

• 한국지형학회지
• /
• 제23권3호
• /
• pp.27-39
• /
• 2016

This study statistically investigates relationships between physical properties of rocks and topography by measuring and analyzing section, topographical and measured parameters of 58 bedrock outcrops at areas covered by gneiss, schist, granite, andesite, sandstone and limestone in the Korean Peninsula. Multiple linear regression analysis suggests that the joint spacing, joint continuity, weathering grade and maximum joint width of rocks among the measured parameters are related to the topographical parameters with statistical significances. Therefore, this study suggests that rock properties such as joint spacing, joint continuity, weathering grade and maximum joint width seem to greatly influence topography, although various factors can affect topographical parameters.

• Journal of the Korean Wood Science and Technology
• /
• 제51권2호
• /
• pp.109-132
• /
• 2023

The objective of this study was to reveal the impact of thinning and pruning regimes on the physical and mechanical properties of clonal teak wood planted in Java. In this study, a 15-year-old clonal teak plantation was carried out and the obtained data were evaluated with analysis of variance (ANOVA). The results showed that different thinning intensities had a significant impact on the alteration of heartwood volume development (F = 25.63; p < 0.0001). Meanwhile, the impact of different thinning treatments in several physical properties depends on the pruning treatment levels [moisture content (F= 12.18, p < 0.0001); tangential shrinkage (F = 15.60, p < 0.0001); T/R ratio (F = 7.17, p < 0.0001); and volumetric shrinkage (F = 10.81, p < 0.0001)]. However, different thinning intensities had no significant impact on wood basic density alteration (F = 0.72, p = 0.486), while pruning intensities affect the differences between radial (F = 3.52, p = 0.030) and volumetric shrinkage (F = 3.13, p = 0.044). In mechanical properties, thinning intensity levels did not promote any significant differences [modulus of elasticity (F = 1.41, p = 0.248); modulus of rupture (F = 0.94, p = 0.392); compressive strength parallel to grain (F = 0.21, p = 0.813); and compressive strength perpendicular to the grain (F = 0.41, p = 0.669)]. Meanwhile, different pruning treatments and combination treatments were not significantly altered all mechanical properties. These results indicated that the thinning and pruning regimes can enhance the mechanical properties without having a serious alteration in the physical properties of clonal teak wood.

• 패션비즈니스
• /
• 제10권5호
• /
• pp.180-189
• /
• 2006

Mercerization of cotton fabrics affects their various properties including physical properties and dyeing behavior. In this study, the concentration levels of NaOH solution, with 18% and 25%, and the mercerization temperature levels, $22^{\circ}C,\;10^{\circ}C$, and $5^{\circ}C$, were changed in order to investigate the physical properties and dyeing behavior using Gardenia, a natural dyestuff, and direct dyes. The effect of tension during the mercerization was also investigated. In order to investigate the dyeing behavior of Gardenia, a direct dyestuff was employed as a comparative material for better objective analysis and evaluation. It was found that the mercerization condition of 18% NaOH concentration at $10^{\circ}C$, without tension, resulted in the highest ${\Delta}E$ value, when dyed with Gardenia.

• 한국응용과학기술학회지
• /
• 제40권5호
• /
• pp.945-954
• /
• 2023

In this study, Sparassis crispa(cauliflower mushroom), which is rich in beta-glucan, was pulverized using ultrafine grinding technology for its potential utilization as a diverse food ingredient. The physical and antioxidant properties of cauliflower mushroom powder were evaluated at various grinding times. The results showed that as the grinding time of cauliflower mushroom increased, the average particle size significantly decreased (p<0.05). Additionally, the water-holding capacity, swelling capacity, and water solubility index of cauliflower mushroom increased significantly(p<0.05). Based on the analysis mentioned above, cauliflower mushroom prepared as a superfine powder for 5 minutes exhibited superior physical and chemical properties as well as antioxidant characteristics and is expected to be widely used in various foods.